Topics around BOM and BOM Editor.
Recently active
I have installed Creo Elements Direct Modeling Express.I can't print a file with an .mi extension made with an older version of ME10.Thank you
PTC, Since more then 4 weeks the PTC License Server for Creo Elements Direct Express is dead/unavailable See: See https://community.ptc.com/t5/System-Administration/Creo-Elements-Direct-Express-License-Server-does-nt-work/td-p/417278 Users of Creo Elements Direct Express are desperately asking for a response/official reponse. Thanks for taking ownership for this issue. Max
Following LISP call throws exception for certain files. (AM_VIEW_PROP :the_view viewPath :show_thread_lines :off :update_view) viewPath is the actual path of the view i.e. sheetName/ViewName. Intention is to turn off the display of thread lines for the view and we call it for all the views in the sheet. What could be the reason? PS> Ignore the smiley in the code above and read it as collonoff 🙂
Please can you help me about the correct Nvidia drivers setup for Creo Elements Modeling environment? If It's possible for Rel. 16 and Rel 20.2. In specific I need to know if the "OpenGl" mode is supported in Rel 16 and next in Rel 20.2. Thank You
Hi, in Drafting. user can add the dimension with the tolerance. but in Creo there is check box to display tolerance upper limit and lower limit. but there is no API in creo toolkit to know whether that tolerance upper limit and lower limit is visible or not. Regards, Vipresh shah
Hello! I am trying to create a model of a reducing elbow (4 to 3). I have the straight ends of the elbow and I was hoping I could loft between the parts. I followed the instructions per the PTC help, but when I try to create Matchlines, I get an error that says "The profile must be closed." So I can only assume that I am picking the wrong vertex? I cannot attach the pkg file I am working with, but I can send it to someone that thinks they can help. Can someone please help me? Maybe lofting is not the way to go, but it was the only method that I thought made sense! Thanks!
I got a problem with using the positioning function in creo elements direct. When I use the positioning function, in the dynamic method, I am able to click on a face when the 3D co-pilot appears. In the past I was able to also do this with edges. Click the edge and a co-pilot would appeard so I was able to rotate a part around the edge, or move it along the edge. Selecting the edge is now not possible anymore. I added my 'catch' settings screenshot, maybe there is a problem with that. Someone knows what the problem can be or where I can find some 'snap' settings
Hi, I recently received a .pkg file with a full model and I found that it also had drawings in the structure tree. My question is how do I see these drawings so that I can export to PDF? I have tried to open them from Annotation tab but it won't let me select from the structure tree or save from there to PDF. Is there a way to view these? I don't want to redo work that someone has already done. Thanks
I use Creo Elements Direct 3D-access V18.1 on my notebook Acer spin 7 Processor: Intel® Core™ i7-7Y75 with integrated Intel® HD Graphics 615Everything worked fine.Then came the Windows update to 1803.Windows update installed the graphics driver V23.20.16.4901.Creo Elements worked, but I had permanent bluescreens due to memory corruption by the graphics driver.Acer support recommended that I install the latest driver version 24.20.100.6025, which I did. Since then the notebook runs stable, but Creo elements doesn't work anymore. Error messages: First: 'vport 1' frozen due to graphics error!Then: Action failed, create_vp/Signal/sigsegvReinstallation did not helprequest for help Translated with www.DeepL.com/Translator
Hello everyone, I'm facing a complex and apparently insoluble problem with macro execution. The code is launched by a Visual Basic Sendkeys instruction from another application and does the following actions: - Reads data from a text file and stores them into an LTAB; - Deletes the text file; - Sets a part name; check if already exists, deletes it, creates a new part with that name; - Draws a table starting from 0,0 and fills it with stored data; - Adds all data as Info to the part; - Prints a pdf file of the table; - Deletes the table heading text; - Goes to Top, executes a Modify Move action taking the table and leaving it hanging to the mouse pointer. Everything worked fine on seven Workstations for about ten years; a couple of months ago it began giving problems on one single PC (which is the same as mine): the code hangs or ends in a random looking way. From time to time it fails before deleting the existing table, deletes it and ends, begins filling the table and ends after a var
While trying to install Manager Server 19.0 M050 on Windows Server 2012 R2 the installing is crashing near the end after it creates the Rapid Deployment Package and during the Installing Model Manager step. In the application event viewer there is an Apache Service error that says... "The Apache service named Creo Elements Direct Manager SoftwareDistributionServer reported the following error:>>> [Fri Jun 15 12:51:01 2018] [warn] (OS 2)The system cannot find the file specified. : No installed ConfigArgs for the service "Creo Elements Direct Manager SoftwareDistributionServer", using Apache defaults. ." How can I fix this? I know this is an old version of Manager Server but I am trying to duplicate our production environment in a development environment so I can test upgrading to 20.1.
How do you import .bdl files? I have tried dragging the file onto the view, but it won't let me. Can you please help?
Hello Friends, I have question about. How can i open CED 20.1 version files in CED 18.0 ? Is there any option to do it. It is there the option of CGRI in Creo Parametric. I have some files created in CED 20.1 version. Now the other subsidiary company wants to access those files but they are using CED 18.0. Please help if some one have gone through such phase.
Dear all, on recently installed Workstations, Direct Drafting 19.0 began to add to drawings the info "PD_ZONE". This is not present in drawings created by other Workstations and is messing up with macros, probably because it is the first info read by an INQ. I can certainly provide some "PD_ZONE" cleaner utility, or lines that ignore it, but the main goal is to inhibit its creation. I believe this issue could someway deal even with the problem reported in my previous topic "Unpredictable macro crash". Thank you for reading! ----------------------------------------------------- Sorry everyone! Do not consider, unless it could be useful for you. The solution is the simplest: Settings>Edit Ambient>System>Ambient-Parametric design module unflagged. Nothing to do, anyway, with the previous topic, still unsolved. Marco
3D dimensions can be a good way to drive changes to a model. The problem is that if you create several of these per part and have an assembly of hundreds of parts, the display gets cluttered with all of those 3D dimensions. The only option at this point in the base module is to use the Show menu to have all labels on or off in the viewport. I would like the ability to show/hide 3D dimensions in the base product. One option for doing this would be a setting where the dimensions (and all other labels) on a part are displayed when the part is set active and hidden when the part is not the active part.
Here's a simple video showing new functionality in AI MAX Share. If you use Creo Elements/Direct or CoCreate, check out AI MAXTools (www.ai-maxtools.com) to see how you can get added functionality for your existing tools!
It is difficult to place dimensions, texts and symbols in annotation. They automatically jump to some predetermined spot. This is just a big pain. Snapping should be able to be temporarily disabled by pressing the shift key or something similar. This would allow the user to line place symbols, texts and dimensions in a neat pattern.
Creo Elements Direct text editor should have a spell check function added to it , just like the option found in this Create Product Idea dialog. Something a person can click to start even, does not have to be automatic.
Model Manager should be improved so that it also fully supports CED Drafting. As it is today, users of CED Drafting and CED Modeling have both the Drawing Manager and Model Manager running simultaneously with a high risk of conflict. To run two programs instead of only one also means loss of performance that makes no sense.
In WGM for Creo E/D Drafting, we need it to show a warning message if a user cannot obtain any response from Windchill server within a certain amount of time. This request might be CoCreate specific. WWGM does not come out of the hang until the command is completed from CoCreate Drafting( END or Esc key from keyboard). Windchill 10.2 M010 Creo E/D Drafting 18.1 M050
In the BOM Editor in Model Manager you can generate a report. The different options are always the default values. It should be configurable to change the default values, cause now you always have to change them again. OK, you can store a Report Configuration, but the number of clicks to select a Report Configuration is as many as changing these options every time. Other option is to make the Report Configuration selection available directly in the BOM Editor UI.
Question: PTC Case C12154695 : Two large customer wants to upgrade to CED 18.1 (now on 17) including MM databse. New server is present but with windows 2012. Cannot find any official support details for version 18.1. Any testings/news on this item. Answer: Thank you for your query. I have taken over the responsibility of your case, please note that Microsoft Windows 2012 is not supported with 18.1 , as also noted in the Platform Support documentation, and currently there are no plans for testing. However not supported doesn’t mean Model Manager 18.1 will not work. I don't know if there are any other companies with the same question? For us and the customer it is very important to get support in this from PTC. So with this I would like sendin the idea for server 2012 environment testing with modelmanager server 18.1.
It is possible to create a general note for any object in the database, by selecting the object and via the right mouse button adding a note. When viewing a list of objects, however, it is only possible to check whether a particular object has a general note. Objects that have at least one general note should be marked with a flag. Then it would be possible at a glance to identify those objects in a long list that have a general note.
In MM it is possible to directly email another MM user by clicking on a 'user' link in the 'Details' box of a record i.e. Currently, MM will provide email template, only populating the user idenitified in 'Details' link. Additional users need to be manually typed out. We would like to be able to select additional MM users from a list, when sending an email from the MM client. Thanks Barry Critchley
At present it is only possible to select one object for operations such as "Save 3D", "Reload 3D" and "Update". It should be made possible to select more than one object for such operations. For example it is possible to select more than one object for "Reserve" and "Unreserve".
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.