Topics around BOM and BOM Editor.
Attivo di recente
Pozdravljeni! Imam težave z dimenzijami v načrtih! Ko pregledujem načrte, ki so bili prej ustvarjeni, imam težave. Besedilo za dimenzije izgine ali se zmeša. Kako rešiti težavo? Hvala in lep pozdrav, Gregor
We have a lot of customers that are using Creo Elements Direct Modeling and are working on projects with an architectural background. A lot of customers need to place their machines in a building and this building is delivered in IFC file format. Some of these architects also need to receive an IFC file back. Please make this an enhancement for the following version(s) because this is really needed by a lot of our customers.
Hi everyone,I’m working in Creo Parametric 12 and I want to make hidden lines in my drawings more visible(you can see in photo 1 how it's now). Specifically, I want:Dashed segments to be longerLines to appear clearer for printing and on-screen viewingI think i have to add a line to my drawing settings but i don't know which one. Could you please advise how to achieve this?Thank you!
1. Describe the ProblemCED License Server 20.8 not supportable if you cannot access the web interface from the client computerHello all.The new CED License Server 20.8 is not supportable if you cannot access the web interface from the client computer.For example, if a user reports that he does not receive a license, it was previously possible to access the web interface via a web browser with:http://SERVER-Name:17171to access the MELs and check whether licenses are still available or whether the license server service is running at all.This is no longer possible with CED License Server 20.8 and is therefore no longer supportable.Then at least the possibility MUST be created that you can check from every client computer whether the license server is accessible and whether licenses are still available, as in FlexNET with the ptcstatus.bat.So the CED License Server 20.8 is not really applicable and usable.Best regards,Christiane2. Are you using a workaround?No there is no workaround.3. Wh
In all modeling versions, options for standard-compliant representation according to ISO 2553 are missing
"The code execution cannot proceed because mfc140u.dll was not found. Reinstalling the program may fix this problem."Please show me how to install the above file "mfc140u.dll"
How can I find the length of the profile when I select?I use this infos the boom list. I would like to add profile lenght.
I'm trying to access the model name and read it in a tree format from Creo ED. Tried a few Lisp APIs I saw in the document; didn't help much as none returned the model name. https://support.ptc.com/help/creo_elements_direct/r20.3.0.0/advanced_documentation/integration_kit/reference/function_index.html Is there any other way to access the data? C# also doesn't seem to have the related API on Part
Hi guys,In Modelling Express for the saving of the files, I have 5 options (like file attacched):- Bundle *.bdl- Package *.pkg- Session *.se2- Environment *.env- Picture *.bmp;*.png;*.tif;*.jpg;*.tiff;*.jpegI'm using *.bdl for saving 3D+2D but there is a method for to save only 3D file and only 2D fileThanks in advanced
Hello I am working on a custom quick acces toolbar in Creo Elements version 20.1.2.0I am making 1 tab that contains all the functions i need on a regular basis. And one that relocates my most used functions to the foreground. I wanted to create named seperators like the standard menu does. But I can only find the boring old line seperator. Is there any way to give my custom split menu a nice looking format like standard? Or is that something that is reserved for the base program? ▼What i've got so far▼ ▼What I want▼ If anyone knows how to do this. I would love to know it. Its not completely neccesary, but it would be a nice clean look to a layout that may be used as a standard within the company. Thanks in advance!
Using Creo Elements Direct Modeling Express 9.0 New to Creo Direct Express and creating first drawings of parts and assemblies. Each time I edit the text on a drawing (title blocks, BOM's etc) a msg is displayed similar to the the one attached.What does this mean? Is there another way I should be editing these items?A second question is when creating the BOM's using the scan, table, draw method, why doesn't the part number populate? Thanks for any feedback
Hello, I have a ME10 macro that selects all geometries from a view and returns the pointer and geometry properties as a list to LISP.The pointer corresponds to the return value of the sd-get-annotator-reference function.To continue working with the elements, I need the sel_items for the pointers. But I can't find an inverse function for sd-get-annotator-reference.So far I have implemented this by using get_selection in LISP to get all sel_items and building a new list in which the pointers are added using sd-get-annotator-reference.I then use this list to add the sel_items to the list returned by ME10. However, the last process is quite slow.Does anyone have an idea how to do this efficiently?BR
Greetings Members As of this week (10/28/25) I am unable to obtain an Activation Key for Express Modeling. It was working fine the previous week. Here is a step by step description of what happens:- Click the CE Direct Express icon on my desktop- Obtain the following dialogue, this is normal or at least has been since direct access to the license server stopped working for me in Nov 2023. Each time I have to reactivate even though I have an account and have been using CE Direct Express for more than 2 years. Nothing has changed - same laptop, Win 10 OS, etc.- I enter my email address and password, select ‘Activate’ to get this dialogue, also normal.- In my case there is no proxy server, I am merely a PC on the internet. My internet connection is fast and reliable. I select the Submit button and obtain this dialogue:- At which point I select ‘Request activation key’. Normally I would receive an activation key in seconds, paste it into the M
Hello ptc When trying to activate Modeling Express 6.0, to get my 72 hour key I am getting the following error in my browser "Internal server Error code 500". As a side note, I have been having to do the 72 hour key for a couple of years now as I get a Proxy Configuration-Connection Failed error for automatic activation. This has not been a big deal as the 72 hour key is a bit of an annoyance but not that big of a deal. Please see attached screenshots.
I attempted to upgrade from CREO Parametric 11.0.4.0 to 11.0.6.0 this morning. When I go to start 11.0.6.0, it fails to start because it cannot find a .psf file. The only "reconfigure.exe" file I can find is in the C:\Program Files\PTC\FLEXnet Admin License Server\bin folder, which merely shows me the available license server. I cannot uninstall under Windows either. Is there a way to salvage this installation or manually uninstall and start over? Any help will be greatly appreciated.
We apologize for the inconvenience. Our IT department is actively working on the Creo Elements Direct Modeling Express issue and we will let you know once the issue is resolved.
Hello, I am using the free Creo Elements direct Modelling express program and would like to save my 2D drawing in annotation as DXF. Unfortunately, I do not understand on your help page in which file I should change something so that I can save a dxf file. Can you offer me further assistance? Many thanks in advance and best regards Daniel
HiFrom a few days I am unable to access PTC site when I ask to request an activation key, either for version 8.0 or version 9.0 (I installed just yerterday for trying to solve this problem !). I am falling always on this site error :What can I do ?Yersterday electric outage stops my computer and I lost access to works in progress !Help me please.Best regards.Bernard Ancelle
I still cannot acquire a 72-hour license due to Cloudflare Internal Error (since Oct 20) despite upgrading to Creo Elements v9 , reinstalling everything , Win 7 up to Win8.1 , back again , back to to Creo v 6 etc etc . But the interesting thing is that I ended up repairing a Macbook Air that had a dead display that I last used three months ago , which had Creo Elements running on Virtual Box , and it re-opened fine without having to acquire a new 72-hour license , because when I shut down VirtualBox I had "Saved The Virtual Machine State" with Creo running on it & without closing Creo , rather than powering off the Virtual Machine. It seems the virtual license doesn't affect Creo on VM's in the same way or at least not on my setup (I'm using VirtualBox 7 on a 2015 Macbook Air running OS Monterey & Creo Elements v6. I guess I'll lose it when something crashes as it no doubt will , but till then I don't have to keep trying to get a new 72-hour license. I'm
Was geht mit dem Creo Lizenz Server ab, kann mein Creo nicht mehr starten?
Hello to all,as a leader of a 3d-printer at school (class 5-13) I use Creo Elements Direct Modeling Express 8.0 (Deutsch).Since a week I cant download a key from websidehttps://www.ptc.com/appserver/securePeModeling/peManualLic.jsp?lang=de&u=Holger&m=DESKTOP-SEPHVKI&w=6.2&v=40.00Any ideas what is frong? Best Holger
Hello together,today when I'll start ptc creo elements I get following error:Is a server from ptc down so that I don't get a new license??What can I do to solve this issue, I need access to ptc creo elements very urgent.Thanks vor help
I am new to the PTC Creo Direct Modeling Express 6.0 setup, and downloaded this free single user CAD tool to get started with making 3D objects. I choose the 64-bit version, and installed on my Windows 8.1 machine. After installing, I want to start the program, and it asked me to activate for new users. After registering for an account with PTC, I then attempted to activate, and get the following:Connection failed.For Modeling Express to automatically activate, it requires access to the internet. Please check if a proxy has to be specified, and enter your company's proxy server details so that the activation can proceed.I don't have any proxy settings in my browser, and am on a home network behind a NetGear wireless router. I do have access to the internet, and can't seem to determine why I am getting this message. Has anyone else seen this before? Any idea what I need to do to get PTC to see the internet?
In Modeling Express, I have figured out how to save a single part as a STL using the "Select" button in the Save dialog, or I can save as STL all of the parts using the "All Objects" button in the Save dialog. Is it possible to in the save dialog to save just a subset of the parts (meaning, more than one part but less than all parts)?
I am using Pro/ENGINEER and Creo Elements/Pro Release 17.0 and Datecode96130I changed the license host from a computer that died to the new device in the PTC licensing management website, but am having issues installing Creo with the new licensing information. I saved the license.txt file to the new device and it keeps telling me that the license server is not reachable, despite the fact that the license server is the local computer.
Hai già un account? Accedi
Non hai ancora un account? Crea un account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.