Topics around BOM and BOM Editor.
Recently active
an option would be nice to save models to modelmanager and unreserve them in the database with the same command. similar like the check-in function does with the Windchill WGM
I would like to be able to create a new user from the credentials of an existing user. i.e. a new user X, joins the Design Office, and needs to be in the same groups as existing user Y. Currently have to create user and manually add to relevant groups.
We would like to extend the flexibility of administrating the visibility of records. We would like an Admin function in the MM Admin Standalone client, that would allow a MM administrator to import a list of records (Masterdata) for which user(s)\group(s) within a project can\cannot see. This "Admin GUI" could also extend to modification of visibility of records, i,e, adding or removing a user\group to the visibility of a record(s) that has already been imported. As an example, a global site designs a product in Model Manager. Each site is already configured as a 'Project' (making this difficult to create a 'product' project). Upon production of a new product, the Design Office will establish which sites will manufacture which parts, and apply 'visibility' of these parts to the relevant sites. Multiple sites may have access to the same records. The benefit of working within a generic ootb Model Manager Admin GUI, would make the administration
I have a customer with big models with a lot of parts, and Model manager go out fo memory. I already set the java memory value to maximum (about 1610Mb, with bigger value Model Manager doesn't start) but it is not enough. So, I think is time to make a 64bit version. Are there any plans about it?
When the Preference "Show drawings as children" is activated, drawings are shown as children of a 3d model. However, all drawings are shown, also the drawings where the 3d model only is a component. This means that for standard components like screws hundreds of drawings could be shown. Also this makes queries very slow. When i do an "expand all" of a large assy with the preference activated this can take hours or leads to out of memory errors. Suggestion: introduce an extra option that only shows the drawings where the 3d model is the owner. This gives more usefuil information and drastically reduces query times (in the mentioned example seconds instead of hours!)
Model Manager implements checkbox attribute editor for some properties, but it remains unusuable for searching. Assume that an Model Manager element attribute (ex: masterdata PART_ASSEMBLY) is controlled by a data dictionary (ex: PART_ASSEMBLY_DD) of enumeration type with 2 values (ex: true, false), that requires a value and set a default one (ex: false). Let configure custom.xml with that attribute and the editor com.osm.editor.WMAttEditorCheckBox as the following: ... <Attribute> MY_ATTRIBUTE <AttributeEditorClass>com.osm.editor.WMAttEditorCheckBox</AttributeEditorClass> ... The DBProperties attribute panel looks fine. Now let go to search and you can search element for true or false, but you are no more able search for both (true OR false). We should expect a way to search for true, for false and for true OR false.
I am trying to develop a drawing in which all annotations on all sheets are followed with the suffix "in". Is there a way of doing this without manually entering "in" into each annotation? Thank you,DAAAAA
Does somebody know what it means if there is a clock symbol in front of a note?When there is a clock symbol in front of a dimension or annotation this means it's missing a reference, but this note doesn't have a reference (placed flat to screen).
Greetings, Pre 6.0 I know I could move text and pull dimension leader line.Where is the magic to do this?Please see attached.Thanks, WayneF
I am having non-solidified piping showing up in my section cut of my drawing that is outside of the section view. If I edit the view definition and change the Pipe and insulation display drop down to centerline it removes all of the floating pipe that isn't solidified yet. When I change it back to default it all comes back.
I see wtpub in my config.pro before all my directory locations. What are it and its use? Where did we get this one?exp: drawing_setup file wtpub://windchill/Libraries/CAD/Standards......etc.. Thank YouKumar
The license period used by the company is too short. I think it's about a week.Is there a way to extend the period?
This is not exactly a CAD question, rather standards-related. Have anyone experienced breaking down drawing general notes, by adding another category of notes just for the purpose of listing notes regarding inspected dimensions? I looked in DRM and couldn't find anything pro or against it.
I want to open the corresponding drawing in Annotation when I click the viewset from the Model structure . It is troublesome because the model and drawing cannot be loaded as a set from Windchill.
Hello, I'be been using Creo Elements Direct modeling and Drafting for few years and just updated to version 19.00. I see some improvements, but Drafting still lacks some of the features that might be very handy in my opinion. One of those features is an ability to lock certain parts in the part browser so you could still see the geometry, but couldnt accidently move the part which is possible now if you're working at the top level. It is kind of dangerous as well because you may accidently drag one part (layer) for just a tiny bit and never see it and it may be critical. In other 2D cad apps there is an option to lock the layer so user cannot select it, move it, etc. Would be nice to see such a functionality in Drafting. Another small, but annoying thing is a diameter dimension. Why is it so hard to make Drafting adding a diameter symbol to it automatically? It does it with the radius... Thanks. This thread is inactive and closed by the PTC Community Management Tea
All, On 6.0. I would like to create a part and drawing using driving/show ordinate dimensions. I prefer to not use create dimensions. I am thinking the model needs to be set up as ordinate in order to show in the drawing. How do I set this all up? I am not seeing in config files. Wayne
Hey all, I wasn't able to search well enough to find any info on this. Is it possible to set the default button to OK, vs Cancel on this dialog box? 7.0.4.0
Greetings, I am on Creo 6. I have 128 sheets in my drawing. I attempt to create a pdf and it freezes. There are some sheets with graphics, but most are boms. Any tips on getting this to work - or am I at the limitations of Creo? Thanks, WayneF
Hi all, we are currently running Creo Elements Direct, Version 20.4. I see that PTC supports Creo on Frame (DaaS): https://fra.me/ for a while. I found this support article: https://www.ptc.com/en/support/article/CS44926?language=en&posno=1&q=ahv&source=search which points to: https://www.ptc.com/support/-/media/1BE085E184384EAE8A0E71BA791D9DFA.pdf?sc_lang=en As PTC supports Creo on Frame but Frame is running on AHV (Nutanix own hypervisor) only, my question is: is AHV supported? Thanks a lot for your help in andvance! JJ
Can't renew my student license... I've tried reinstalling and running setup, which seemed to work. I have the new license .dat file, it let me pick it and continue, but doesn't seem to recognize it. When Creo 6.0.2.0 loads it tells me I'm not licensed and to renew. When I try to enter my user name and password it says "User Not Verified"Any help out there? Thanks in advance, Andrew
Hi to all, today I downloaded the .exe file, I intall it and all the process finished without problem. If I try to run the program, it doesn't work and appears the problem in photo attached. Could comeone help me? Thank you in advance.
Dimensioning takes about 50% of the time for a drawing.There lies a great potential for improvement. The commands for Tangent Dimension DA_DIM_TAN in Drafting and am_create_dim_tang in Annotation was a big improvement.Previously you had to split the arcs at the right place before you could dimension them.If the command is active it is necessary to make three entries.First element, the second element and position of the dimension number. The chain dimensioning saves lots of clicks because you just have to select only the next element and the dimension number is automatically positioned.If the chain dimension would also recognize fillets, arcs, circles, it would be a great simplification of the dimension process. All kinds of dimension could be approved this way. Die Kettenbemassung sollte auch Abrundungen, Bögen und Kreise erkennen und diese tangent bemassen. Das Bemassen nimmt ungefähr 50% der Zeit für eine Zeichnung ein.Da steckt ein grosses Verbesserungspotential. Die Befehle
Another piece of the puzzleYou can check whether the license server is active without starting Express.This avoids Express being blocked if he is not available.Manual activation takes you through this page: ! edit link first ! USERNAME and COMPUTER-NAME must of course be replaced accordingly"https://www.ptc.com/appserver/securePeModeling/peManualLic.jsp?lang=en&u=USERNAME&m=COMPUTER-NAME&w=6.1&v=40.00" Have a nice week 😉
I recently acquired a new work PC and I had to re-install Creo Elements 8.0 (free version) On my old PC I did not have to use the Manual Activation, it would just load up straight away but for some reason that is no longer the case! Now it does not find internet connection and when I then use the Manual Activation Key I get the following error message; “The activation check for Modeling Express to run on this machine failed because of the following reason: The activation code you entered is invalid.” I have copied and pasted several different codes but all come back with same error message! Can you please help as I regularly use this software? Rob
Excuse me, sir When I load the PCB, the connectors are like the cubes. How do I show the real connectors? Please help check the following pictures. Respectfully
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.