Topics around BOM and BOM Editor.
Recently active
I would like to create a blend of fillet 2 mm in the part where the width of the flat part is 1 mm.
At present it is not possible to use CED products such as the MEls license server or the ModelManager in combination with products that do not support IPv4. An example of this is Microsoft Direct Access, which only supports IPv6. This should be made possible immediately. See also Article - CS188191.
in some cases the 3D Co-Pilot is not on the part or assembly. It would be nice to have the possibility to change the position of the 3D Co-Pilot an bring it back to the geometry. In manchen Fällen ist der 3D Co-Pilot nicht mehr an der Geometrie des Teils/Baugruppe. Es wäre schön wenn es eine Möglichkeit gäbe den 3D Co-Pilot neu zu definieren und wieder an die Geometrie zu setzen.
Hello @ all, to complete the Model based Definiton in Creo Elements direct to an useful Level, it should support Combined view functionality like Creo Parametrics. This Feature is already available in Creo 6 and should be adopt to creo Elements/direct 20.x.
We need a possibility to stop the current command, when Modeling and Annotation does not respond. We have no possiblitiy to insert a command in the commandline of Modeling or Annotation. SD-kill.exe or Ctrl+Break or Esc does not stop the command. The only solution is to close the Modeling in the Task Manager, unsaved work is lost.
Structure Browser in modeling supports customizations about Browser Views (with command sd-create-browser-view), you can add your views with your columns (sd-create-column-definition). You can define view and edit functions for each column (display-fnc and edit-fnc) but you can't define constraints about values inserted, like a drop-down list. I need it. The same feature is naturally present in Creo Parametric (with restricted_val_definition): I've just tried to ask it in a ptc case 13980076 with this response: Spoiler (Highlight to read) I spoke with my colleague and he is also the opinion that this is not possible with IKIT.I think you know where to find the complete documentation of IKIT. Please see following article.https://www.ptc.com/en/support/article?n=CS118457If you want you can submit a product idea. I spoke with my colleague and he is also the opinion that this is not possible with IKIT.I think you know where to find the complete documentation of IKIT. Pleas
Solidworks have it since I remembermulti window view option
Ability to place dimension along vertical direction
keep balloons when changing format of drawing
have ability to choose - round, squared, rectangular or other shapes after this PATHETIC SPILINE is finalize to shape suggested in description with leader to or not ( choice) detail right know it looks like DOS FROM 1995
Hello, Please refer the drawing of 2 plates with several holes. I would like to create lets say smaller plate first and when I need to create bigger plate I would like to reuse smaller plate and by changing only few parameters new model should be ready. I have seen functionality in SWX which is called driveworks. How to achieve this with Creo modeling? Thanks in advance.
one of most aggravated functions for me What is your intention to revise a part - change - correct ? so why when you change revision level Windchill does not ask - "do you want to check out' ? of course not - because you have to get back - mark it again and then check out don't you think it would save many clicks and time?
why form tools need to be matted and holes have drag and drop handles ?are we talking about same company ?
For small models (about 100 objects), the load of a CPU core remains under 100 percent and the graphics card is about 50 percent capacity. The model can be rotated smoothly and you can navigate very well. For larger models (assembly with 142020 subordinate objects); a CPU is fully utilized and the use of the graphics card falls to a maximum of 10 percent. The model can not be rotated properly (delay of several seconds, strong jerking). It seems that modeling doesn’t provide the graphic card with the necessary data fast enough for large models. That With the latest hardware, CED can not retrieve the available power / capability from the new system. This is of course a pity or an absurdity. Here, there is an urgent need for action that the graphics engine of modeling is adapted to the modern HW / operating systems.
Native import in CED 20.3.1 and 20.3.0 do not support Inventor 2020 and Inventor 2021, this will create problem for customers. It should be a good idea to implement these release direct import.
Hello Community, As monitors get bigger and bigger for reasonable prices, more and more 40" displays can be found on a 4k resolution in the design departments. Running Creo Elements/Direct Modeling on such hardware is great, a lot of room for the designs. But the texts some how get unreadable and the only chance to change this, is on the operating system level to change the font size. But this changes the entire UI. Would it not be a huge vale to have this independent e.g. the part browser with a kind of Zoom functionality, like in the view port with the mouse scroll wheel for the part browser, so that it becomes more interactive and the UI with an independent setting for the Icons and the Tooltips e.g.? Or at least have more influence to set the font / font size for the UI, Tool tips and the part browser independent, some sort of the setting like in the Model Manager Preferences? What's your opinion? Community, do you see a value? Feedback is welcome
whenever you activate a configuration, you may want to have an other viewport color, so the user is warned about the fact that there is currently a configuration active. This will prevent him from doing design work, that is not adressed to the default position of the assembly. this should not be dependant on a single selected configuration as the highlight feature, but whenever an configuration is activated, color should change.
A small detail, but one I often hear. When running Drafting and Drg Manager, the Icons in the Win Task bar are the same. Please can the DM Icon be detailed subtly different, to establish which Icon belongs to which Application. Thanks
The icon bitmap of Creo Elements/Direct Modeling and Creo Elements/Direct Model Manager are same. And our customer often makes a mistake, He selects Creo Elements/Direct Modeling icon from "Windows Task Bar" in spite of he needs Creo Elements/Direct Model Manager. You may need to change the icon of Creo Elements/Direct Model Manager.
Some of our customers are requesting some functionality to simplify a downloaded assembly. Lots or users download parts from the internet, from suppliers, but are not interested in every detail of this assembly. Only the outer faces are important, and since Annotation now can update face parts, it even can be a face part. The reason is that downloaded assemblies sometimes take up to a lot of Mb's, and filesize could be reduced multiple times having only 1 part or face part. Resulting in the ability to load bigger assemblies, less graphic performance... Cleaning them up takes quite some time, which is lost in the end, so you would gain also man-hours! The current Simplification functionality is not sufficient in this case, and a relation to the original part is not necessary anymore at all. Breaking it down, we would like to have some functionality to select only visible faces in a certain direction, just like Annotation does when it creates a view from a part. Doin
We recently had a request for information on how to measure the distance or offset between planar faces in Modeling (though these tips really apply for measuring the distance between any two points). Here is a simple video (about 4 1/2 minutes) that shows a few different options, including one tip showing how to get the X, Y, and Z components AND the overall length between the points using a single operation! https://youtu.be/_4dmHQe5mlk I hope this is useful for some of you! Please let me know if you have any questions. Thanks! andy
I'm not sure what I'm missing. It looks like I've done everything, the feature is displaying, and I'm not seeing any errors/warnings, but ok is greyed out. It's a shelled hemisphere on top of a cylinder, and the whole is going onto the hemisphere. I've projected a sketch onto the hemisphere for placement of the hole, with the idea that there are multiple holes that will each get patterned around the hemisphere (each would be a distinct pattern, with the attention of creating a distinct hole feature for each pattern. Any help would be appreciated.
The ideas section is not active, so I will pour out my pain here.While this is great software, there are some things I'm sure can be improved, but no one has improved them in decades as far as I can see. Like the good old BOM!How good would be for the designers to be able to create a BOM directly in a 3D modeling application and then just to call it in Annotation application or just to print it in a file. Also directly to set some properties for the parts or subassemblies in such a 3D modeling BOM like the following: ITEM, PART NUMBER, REVISION NUMBER, DESCRIPTION, COMMENTS, STOCK NUMBER, MATERIAL, QUANTITY, MASS (automatic, depending on material) and other properties - like in all contemporary programs!I started reading the help on how to configure BOM and I think I have to finish my second higher education to be able to do something! Then I saw that various people had difficulty with this back in 2007 and still have.Why? ! I hope this will be improved, but my hope is very weak.&
Hello , I have a file wihout extension, but according to my researches it is ME10 file with (.mi) extension. Firstly I tried to open it by changing name and extension. As a result I wrote (.mi) and opened it on "Creo Elements/Direct Modelling Express 8.0". So it is succesfull method to open 2d ME10 file. Also I have an another file that it is without extension too. But this file is not working with (.mi) extension on "Creo Elements/Direct Modelling Express 8.0". The reason of this problem that probably this file was created by ME30. It is 3d model. I tried a lot of extension to open it on the program but failed. I cannot drop this file here because of company's policies. Years ago, files as these files without extension created on HP-UX OS. By years by as technology changes, ME30 became Creo Elements/Direct Modelling. I made a deep research in internet and found this kind of knowledges. Can anybody help me to open this "ME30 file" ? Thanks for reading my
Dear All,Some news about Kotom-Eng: new macro for drawing a table from a csv file and vice versa.Have a look at http://kotom.eng.free.fr/drafting%20tools.php
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.