Recently active
In 2 days time there we will publish the link to download Creo 4.0 Sneak Peek
"Are you not the most wicked and ungrateful of reptiles? But for me you must either have given up your journey, or have been drowned in that stream, and what is my reward? If it had not been for the armour which God has given me, I should have been stung to death." "Blame me not," said the scorpion, in a supplicatory tone, "it is not my fault; it is that of my nature; it is a constitutional habit I have of stinging." - The Scorpion and the TortoiseIf you need explanation of the above, email me. Ok, we are on day 2 and I have had my fill of IoT. Don't get me wrong. I think this technology is the future, potentially very lucrative and as one of my old Wildfire customers quoted, "slicker than a wet nickel". PTC is smart to take advantage and jump into this growth space since it multiplies the value of the PLM data we've built for years. However, for my company in the defense space, I am not seeing direct applications. Pardon my lack of enthusiasm but I will still keep my eye on this. I do
I tried to paste the embed code from twitter to include an embedded tweet, but Jive doesn't seem to support it and just leaves the raw HTML exposed:<blockquote class="twitter-tweet" data-lang="en"><p lang="en" dir="ltr">Real time rendering app coming with PTC_Creo 4.0. <a href="https://twitter.com/hashtag/LiveWorx?src=hash">#LiveWorx</a> <a href="https://t.co/IQnY3g7K2k">pic.twitter.com/IQnY3g7K2k</a></p>&mdash; PTC Creo (@PTC_Creo) <a href="https://twitter.com/PTC_Creo/status/740517644273647617">June 8, 2016</a></blockquote><script async src="//platform.twitter.com/widgets.js" charset="utf-8"></script>Here's the link to the tweet I wanted to embed:PTC Creo on Twitter: "Real time rendering app coming with PTC_Creo 4.0. #LiveWorx https://t.co/IQnY3g7K2k"Any way to enable embedding tweets in posts?BTW - Here are a couple of Twitter's pages on embedding:Embed a Single Tweet | Twitter DevelopersEmbedded Tweet CMS b
PTC would not be investing R&D revenue without a cause. Somewhere in the acquisition process, as it should have been in the determination of need (DON) phase, PTC moved forward to implement G3 in Creo 4.
Tento model obsahuje kombinované pohledy zobrazující automaticky propočítané parametry jako je hmotnost, nebo poloha těžiště včetně kót.Obsahuje také rozstřel sestavy a jednotlivé montážní kroky, příslušné kóty a symboly svarů.Aby bylo možno se mezi vybranými stavy snadno přepínat, můžete od PTC Creo Parametric 3.0 přidat odkazy do poznámky, který směřuje do zvoleného kombinovaného pohledu.Pokud zvolím tedy například odkaz ROZCESTNÍK, který mám na všech pohledech, dostanu se na úvodní zobrazení, ze kterého si mohu například prohlédnout jednotlivé montážní kroky a operace.Tyto odkazy opět fungují i v PTC Creo View.
Please leverage the content below to learn how to deliver the ThingWorx Open Platform presentation.Open Platform Presentation - Sales PresentationLivestream - Open Platform &amp; Cloud: Partners in IoT Success - Webcast replay of Joe Biron, SVP of ThingWorx Technology and Frank Gillett, Vice President and Principal Analyst serving CIOs at Forrester discussing IoT and cloud computing technology.O’Reilly Media: Foundational Elements of an IoT Solution - Whitepaper that introduces you to the high-level concepts, components, and patterns for any type of IoT solution. Authors Joe Biron and Jonathan Follett take you through the technology and architecture, so that technologists like you can dispel misconceptions within your organization and assess the real opportunities for advancing your business with the IoT.ThingWorx AWS IoT Connector Installation and Operations Guide - This technical support guide describes how to install, configure, deploy, monitor, and troubleshoot the ThingWorx
Customer facing sales presentation describing or Open Platform strategy. Speaker notes are included.
See if this answers the spiral on the right-hand side of your image. File attached from Creo 3.
Well...I guess it's nice to know that the ying-yang is on our side.
Good day everyone,As you have seen from the keynotes and agenda, LiveWorx 2016 will be full of action and education.If you are new to Boston or just looking for things to do at night, here are some suggestions:If you like seafood, The Union Oyster House is a great spot in Faneuil HallIf you venture to the Faneuil Hall area - The Fours Boston is a MUST stopA relaxed seafood spot near the event is the Barking Crab - casual and tastyMore seafood and great Boston Harbor views can be had at The Legal Seafood Test KitchenLooking for a burger and a brew? Jerry Remy's is your stopHungry for steak? Smith and Wollensky is a FINE steakhouseCraft beer drinkers - The Harpoon Brewery is a must stop - and near the eventBaseball Fan? Enjoy a Boston Red Sox game - Stubb Hub and Ace Ticket are best bets for seatsHere is the is Convention Center PageGetting around Boston is not horrible, but the stories you have heard about our drivers are pretty true - driving is an adventure.Enjoy the event and Boston!
It appears that PTC would not implement G3 unless they have a demand for it. Perhaps they already have their customer base validated.
The community's own Brian Martin is showing off his new ride.
Dean,Did you know Creo 4 will have G3?
Yes....it does.
I was having a quick play with a numerical solution for the Lambert W function, and had a quick look at the NIST Digital Library of Mathematical Functions (successor to the might Abramowitz and Stegun). I noticed that there is an appendix listing mathematical software: DLMF: Software IndexIt lists Maple, Mathematica and Matlab, but there seems to be a rather glaring omission from the list. Opportunity?Stuart(In fact, Mathcad seems surpisingly unknown in many mathematical / programming quarters).
Novinkou PTC Creo Parametric 3.0 je možnost sdílet 3D poznámku skrz všechny KOMBINOVANÉ POHLEDY.Příkladem může být tento červený text, který chceme zobrazovat ve všech pohledech.Vidíme, že text je pouze na první záložce. Výběrem poznámky a nastavením Security Marking dojde k nakopírování do všech kombinovaných pohledů.Text je možno editovat, přičemž se změny projeví ve všech pohledech.Do textu vložíme parametr ze seznamu, stejně jako jsme to udělali v poznámce na výkrese.Bez opětovného odkliknutí Security Marking nelze tento text z pohledu odstranit.Nově je možnost vložit Symboly do 3D poznámek. My vložíme symbol nového loga AV ENGINEERING a opět nastavíme jeho viditelnost ve všech pohledech.Všechny tyto kombinované pohledy pak můžeme zobrazovat na výkresech (to je ta výzva, která se může zobrazit na výkrese, když vkládáte ručně pohled), nebo v aplikaci PTC Creo View.
Good day Gents,Please find the updated Excel file that includes May results; after LiveWorx I will put together a meeting via WebEx for us so we can discuss these further.Regarding the Engagement tab:Happy to see the trend of questionsResponses look great tooOur engagement rate is fantasticConcerned about answer rate and digging deeper into the metricI would like to see questions continue to increase as this tells me PTC Community is a trusted place for knowledge. Regarding answer rate: it is not as though questions are not getting answered, I simply want to ensure questions get answered. I am less worried about the number, but I want the information accessible.Regarding the User Adoption tab:Membership is trending wellI am not looking at total membership; I am focused on the members who are taking action. There may be a time to study and engage lurkers, but for now, I want to focus on those members who are sharing knowledge and helping others.What are your thought on
The STEP file from Alcoa looks like this.
I don't know, but it really got this guys attention. I hope they don't change the Creo ribbon to this color .
This is a quick share to all, especially the folks in my training class yesterday, PTC Windchill 11.0 System Maintenance. The conversation was excellent and I hope to maintain connections with you all. We did not spend much class time learning purging but it was a discussion point. I wrote this a long time ago but it should still work in current versions. If you follow the standard rules that once something is released, you do not need to keep all the iterations the led up to the latest iteration. You would construct a purge query to clean these out. But how do you know which products to target first and what the expected results of your purges will be? This report looks at how much file space can be recovered by purging various products. I call this "bloat". You can execute this in TOAD or other SQL programs. My suggestion would be to run this first, do your purges, then run again to see difference. Don't forget to remove unreferenced files from vaults. E
The LiveWorx reception is on.PTC Community and PTC/User are sharing the Think Tank space.Come by and say hello
Community,Below and attached are images of the 312-12 Receptacle. I went to the Alcoa web site, and the STEP file they have for downloading is not the correct geometry. I contacted Alcoa, and they stated that was the only CAD file for downloading. Does anyone have this in 3D that can be imported into Creo and willing to share? Thanks in advance.
The attached file provides details on what is new in Model Based Design or more information about the enhancements in MBD, check out the main blog post: Creo 4.0 MBD Home: Start Here!There you'll find links to some additional details on these enhancements as well as videos and other comments/discussions...
The attached file provides details on what is new in GD&T
The attached file provides details on what is new in Direct Modeling
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.