Recently active
ReplyUse advanced editorAttach
Can you upload the model?
You can fill this in with the Boundary Blend tool (two directions) using a surface, then Thicken the surface to the desired thickness. Select the outside edges of the geometry for the blends.Then test the geometry for meshing.Welcome to the forum.
..the below from an email from the Peggy Smedley Institute Peggy Smedley Institute | Where Leaders Learn IoTNew Possibilities for IoT in Construction Keeping up with changes to code, worker safety, and environmental guidelines can be challenging for construction companies. Enter the IoT (Internet of Things).Companies with IoT applications will have a competitive advantage over those that lack the vision to adopt, overcome, and ultimately prosper from the fruits of the IoT. The potential for the IoT is certainly there, but when will it reach mass adoption? Today’s contractors are leveraging drones to gather data at the jobsite. They are exploring the potential for 3D printing. And they are even working with technology providers to trial ‘smart wearables’ to improve safety at the jobsite. When will the IoT reach mass adoption in construction? If your answer is 10 or 20 years down the line, it might be time to explore the opportunities further today.
Can you provide the link on the Product Idea?
Community,Here's a good web site for downloading free 3D and 2D CAD models. I downloaded a Panasonic Toughbook CF-31 that was made in SW, but the web site has a built in translator, and I was able to download it for Creo (Pro|Engineer), as shown in the second picture. You will have to create an account before downloading.http://www.3dcontentcentral.com/
Good luck on the developers implementing this.
Makes a lot of sense.
Here's the link to the site, and there are a lot of great models to download:http://www.3dcontentcentral.com/
CAD AND PLM STRATEGY FOR PTC CREO ELEMENTS/DIRECTDIRECT MODELING IN PTC CREOPTC CREO - LONGER TERM DIRECT MODELING ROADMAP PTC FLEXIBLE MODELING EXTENSION (FMX) & PTC CREO DIRECTPTC CREO ELEMENTS/DIRECT – PTC CREO DATA UPWARDS COMPATIBILITY ROADMAPENHANCED UPWARD COMPATIBILITY TO PTC CREO 4.0 - OUTLOOKCAD CONSOLIDATION WITH PTC CREOCOLLABORATION WITH UNITE TECHNOLOGYCREO ELEMENTS/DIRECT 20.0 MODELING/DRAFTINGOUTLOOKCUSTOMER DRIVEN ENHANCEMENTSSHEET METAL EXTENSIONS TO OPTIMIZE WORKFLOWSMULTI-CAD COLLABORATIONPLATFORM SUPPORT UPDATELONG TERM DIRECT MODELING PRODUCT ROADMAPPRODUCT ADOPTION STRATEGYKEY TAKEAWAYS
19.0 M050 has just been released, which includes Windows 10 support. Please remark that some translators are not supported on Windows 10.
If you respond to an older post, for example, over a year old, why does it not circulate back to the top of the list? Is there a cut-off date for recirculation? I answered a post today that was just a little over a year old, but it doesn't show up at the top in Creo Modeling.
Vladimir,I located a real 3D model of the Panasonic Toughbook CF-31 (minus the handle) in a web site called 3D CONTENTCENTRAL, as shown below, and I uploaded the assembly. It was made in SolidWorks, but this web site has the capability to down load it in many different formats.
Currently, that's the only way I know how to pull a surface on a n-sided patch.
Michelle Duke Hopkins, Managing Editor of Product Lifecycle Report, enjoys writing about new technology trends and innovations that impact customer relationships and as well as the overall business. So it’s no surprise that she was drawn to cover EMC Corporation. In a blog, she touted EMC as “a great example of a company successfully transforming service to meet their customer’s needs and improve the overall customer experience.”EMC’s GoalsDeliver efficient and effective proactive serviceEvolve planned preventative service to be as good as the current response to customers’ immediate service needsKeys to SuccessDeploy field service management and service parts management systems consistently across all geographiesUse evolving technology like PTC’s Service Lifecycle Management solutions to support a blended workforce and complex workflowsResultsEMC has won 23 STAR Awards from the Technology Service Industry Association (TSIA)EMC is one of two companies to win the TSIA’s prestigious Hall
Doesn't the interface GUI show which component it applies too?
Thanks Werner. That's what I was looking for.
Important for version 19.XX there is a problem reported to PTC compatibility of graphics cards and 64-bit OS with the new version of Creo Elements Direct Drafting & Annotation Please note facilities (VERY IMPORTANT ) with this environment Vble many reported problems are resolved in this version :You may as a test set the environment variable:GRAPHICS_LIBRARY_GDI = 1that solves some of the graphics problems newly discovered in 19.0.
Open your Simulate Help Center and search for "avi". There will be instructions on how to do this.
This video is extruding a surface from a 3D curve. It may not give you what you want, but it's a good procedure to know. FYI. https://community.ptc.com/t5/3D-Part-Assembly-Design/Extrude-a-3D-curve-or-a-surface-edge-with-Creo-Parametric/m-p/440451?ru=107006&sr=inbox
Per IoT-Analytics (@AnalyticsIoT)
Correct. I've used the Express version for a number of years, and it doesn't have STEP export capability.
Claes,I've attached a presentation on Creo Layers.
John,Creo has the capability to manipulate surfaces by using control points. Here's the instruction on how to do it. So yes, you can certainly pull surfaces in Creo, but getting it on your blue curve is something I'm not sure of. We pulled surfaces when I took a WF5 surfacing class back in 2010. Hope this helps.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.