Recently active
In the image below, Depth of Field is selected, but its unclear how to set the focal point and how to set the focal point and blur. The DOF effect is not seen in the image below.
Our team used several design principles and strategies to analyze the challenge, share ideas and decided on a design to work towards. After the new season challenge is released we begin the process of choosing the design to build towards. The main design process tool we use for this part is called a Q.F.D. or House of Quality. If you don't know what is means, check out the short videos on youtube for an explanation. We modify this Q.F.D. to work for our team. Let us explain how we do this.The first step we do is write down each part of this season's challenge and their point value. Then we look only at the challenges on the field(not how to accomplish them) and we rate each challenge. We decide if the challenge is a priority, with ratings of low, medium and high. Then we look at each challenge and rate it on how difficult it would be to do those challenges, ratings of low, medium high. And after looking only at the challenges, we narrow down the challenges to the ones we want to tackle
How does your graph look?
Gene,Your file was created in an educational version of Creo and cannot be opened with a commercial version of Creo. The path to shear-moment graphs is shown below.
Description:Multiple license are utilised when launched multiple sessions by a single user on a single machine.Applies To:Creo Parametric 2.0 to 3.0Resolution:Reported to R&D as SPR 5601958The requested change has been implemented into the license cutting toolAll newly retrieved or generated license files will have this function includedLaunching multiple sessions using floating license will consume only one license for a single hostKeyword DUP_GROUP is required in Base LicensesDUP_GROUP is not available for extension licensesFor existing flexnet licensing setup, need to configure flexnet license server with an updated license fileRequest updated license file from PTC License Management team for target license file HOST IDUpdate flexnet license server with newly received license fileFor LMTOOLS/LMGRD based license server refer to CS20092For FLEXnet Admin/LMADMIN based license server refer to CS77700More information: CS234779Thanks to Jaime Roca for the info.
Hi All,My profile picture had been updated it will appear when the moderator approves it. Its a painting done by a lady I know. Its the picture of horses running thru a river/stream/lake/ocean.I apologize if you find my current profile picture a little different than could be expected in the PTC community. Painter I have an interest in from the 1800 to early 1900 time is Lawrence Alma-Tadema. You may find his pictures in Amazon.com or art shops online.I had not been in the community though I receive emails from PTC. I had on several occasions wanted to come in due to the interesting topics I saw in the emails. However my graduate certificate studies at the University of Idaho were very time consuming. I completed it in December 2015.I had uploaded a few files which I had worked on in 2016 these were uploaded in the electrical, mechanical and physics groups.
ICYMI, Aly Pinder, Senior Researcher at Aberdeen, wrote a blog for PTC highlighting the importance of having the right service part for the job, every time. He extracted insight into how Best in Class service and manufacturing turn “data into quality intelligence” from Aberdeen’s research on Service Parts Management.Essentially, “in order to improve the ability to meet customer needs and resolve service issues more efficiently, top performing organizations have looked to collecting and making available service parts information to better inform management and the service team of the real-time needs in the field.”Best practices and examples from Best in Class organizations are examined in Aberdeen’s research as well as Aly’s blog.View the InfographicView the Infographic to learn what Best in Class service and manufacturing organizations are doing to stay ahead.Read Aly Pinder’s blog post How Global Manufacturers Can Better Manage Technical Information.
Making a plethora of offset lines in an assembly can lead to long model trees. Creo Parametric 3.0 does NOT have the capability to group offset lines, so the model tree can be contracted. Add the capability to group offset lines.
Partner Resources Webcast- Register Today!Learn More About:ThingWorx CommunitiesPartner Enablement ToolsTechnical SupportMarketing Programs
PTC and ThingWorx Partners Showcase Industry Leadership in the IoT AnalyticsGreat read on PTC's initiative to highlight the increasing importance of data collection and analysis in today’s Internet of Things strategies. To promote awareness and thought leadership around IoT analytics, PTC will host a series of webcasts throughout September and October, including ones with ThingWorx partner Glassbeam and PTC ServiceAdvantage, and ThingWorx partner Kalypso. PTC intends also to make available to the industry a series of thought-leadership materials on how to get started with and, ultimately, derive ongoing value from an analytics operation.
Good day Gents,I have come across this Group and they are posting with regularity.SMARTElectrodeThis is Creo focused, but asking your opinion of the content.Thank you,Toby
Hi,I've started to test the new "Custom Chart Widgets" that was released in August 2016.But I am having issues when the service that feeds the data to the chart is re-queried.The chart should flus and display new data, but all the values from the "previous" query are still displayed.So what can be done to "flush" the data from the chart?Thanks!
Attributes:Current Software Version: 10.7Technical Area: Usability, ClientBusiness Impact: lowKB internal ID: AI 1137365KB is asking for an easier way to switch from on Integrity Server to another one without closing an e.g. Query Window and Reopen it to select/enter the other connection. Ideally right click on window title -> change connection or select connection. The background is the usage of different Integrity Server for e.g. Testing (key user) or Training (new user). During the clarification we have discussed about an alternative: the usage of different Viewsets could be more safe, e.g. to be sure that the user knows directly via the viewset on which Integrity Server he is working. So the Testserver provides his own viewset with the connection and the Trainingserver provides his own and each has a specific name and maybe additional information in the toolbar.
Attributes:Current Software Version: 10.7Technical Area: FunctionalityBusiness Impact: mediumRunning individiually created queries causes run-time overflow. The searching algorithm to be improved
Attributes:Current Software Version: 10.7Technical Area: Functional, TMBusiness Impact: high
Attributes:Current Software Version: 10.7Technical Area: Functional, ClientBusiness Impact: mediumBusiness Case: There are serveral Integrity Server in the environment which are not in a staging process. They are maybe with different configurations and different content. For testing or training it is needed to have a configuration and the data on the other Integrity Server. E.g. in the normal staging is a Dev, Test, Prod server and beside of that it is a training server. To train the user it is needed to have the real configuration and some real data without having it all on this server. Therefore KB is asking for a feature which supports the easy automatic copy documents (at least) and configuration.
Attributes:Current Software Version: 10.7Technical Area: Usability, TMBusiness Impact: highWorkaround available: YESKB Comment: Workaround provided by PTC by using Test Result Detail Type, Workaround provided and is still under investigation with the business.
Attributes:Current Software Version: 10.7Technical Area: Functionality, SolutionBusiness Impact: highKB has a more level document type hierarchies to represent the different system/subsystem/component/sub-component/... levels. The reason for this was the following:- Partially different node types- relationship/trace configuration is possible via different types and categories, but the categories are not enough because it could be the same for different levels.Negative:- Cannot copy content from one level to another level, also if the nodes contains the same fields- The amount of the levels are confusing users which not need these complex structure.Alternative: Creating less document types and maybe adding an additional field for defining the document level (e.g. SystemRS, SubsystemRS, ...)- Better overview about the datamodel and easier usage of it- Copy content can be done OOTB instead any customization- User can redefine the level of the documentNegative:- Relationship/Trace definiti
Attributes:Current Software Version: 10.7Technical Area: Functionality, Import/ExportBusiness Impact: mediumPTC Case: C12417796This shall be handled as a defect for graphics as a solution could be already made available and graphics are part of different kind of requirement documents.
Attributes:Current Software Version: 10.7Technical Area: Usability, Import/ExportBusiness Impact: medium
Attributes:Current Software Version: 10.7Technical Area: Usability, Import/ExportBusiness Impact: lowKB internal ID: AI 1137362For reason the Gateway List is globally available for each user and the list is growing and growing, because for the different doc types or languages and so on. Therefore it is not easy to handle it, because the user has to find out his relevant Config/Mapping import/export configuration for his project. KB is asking for a possiblity to restrict this list e.g. per project / role / or something else, so they can assign the relevant correct Config/Mapping entry to the user. So one solution could be that the project permission is enabled also on that and the admin can define in the Config/Mapping the project or the doctype is analysed to filter the list or the active project is used for the filter.
Attributes:Current Software Version: 10.7Technical Area: Usability, Import ExportBusiness Impact: lowReduce 3 ways to import documents of different formats (xls, doc, ReqIF) to one simple way . Simple meaning that the normal user can import the documents themselves with a description
Attributes:Current Software Version: 10.7Technical Area: Usability, Document ViewBusiness Impact: mediumKB internal ID: AI 1137366PTC Case: C12980038
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.