Recently active
Taking a measurement just beyond the split confirms that the profile is moving outward.
Perhaps. But when I set up the attached measurements, the distances are the same, so the profile has not moved outward at this point. Maybe this is the point of tangency where it starts to move out. I will do another measurement just beyond PNT0.
The geometry in a particular area is not suited for meshing.
That's true, but I was referring to system colors under the drawing format tab. You're referring to the image on the left, and I'm referring to the image on the right.
I'm not using pentable. Is that the only option to get GD&T to export in color?
Community,After exporting a drawing to PDF, there is no color in the PDF except for datum axis and csys, they are the default brown. But all of the blue text and blue dimension lines, etc., show up in black. I saw a post where people set up the pentable for actual printing on paper, so I'm wondering does that apply to PDF too? And this happens after I select "Color" on the export settings. I'm using Creo 3.0 M010. Any solutions for this? Thanks in advance.
Thank for tips. I was able to change any of the text to a desired color except the GD&T and datum reference symbol. I can change the datum reference symbol color in the model, but not in the drawing. The image below is from the exported pdf with the items that remain black boxed in red.
New England Patriots, Julian Edelman will host our closing reception and Tech Meet-Up, the LiveWorx Mix @ 6 on Wednesday, May 24th from 6:00 - 9:00 pm.We still have not announced our main keynote speaker but are excited to welcome all of our Special Guests and Speakers to Boston for LiveWorx 2017:Eric Brynjolfsson - Bestselling Author & Director, MIT Initiative on the Digital Economy (IDE), MIT Sloan School speaking Tuesday, May 23 - 5:15 - 6:00 PM Reshma Saujani - Founder & CEO of Girls Who Code Thursday, May 25 - 12:30 - 1:15 PMJim Hepplemann - President & CEO, PTC Tuesday, May 23 - 8:00 - 9:00 AMHave you registered for LiveWorx yet? You can also visit our full session catalog. Click "Browse and Search" and review sessions based on what interests you and see that LiveWorx can improve your daily operations with over 200 Breakout sessions to choose from.If you are local, tickets can al
To change the color.
Tom,I selected the green in the systems color, and it printed out green, as shown below.
Attached my latest 2017 SAXSIM presentation about linear dynamic system analysis with Creo Simulate (unshortened full version). The presentation gives a comprehensive insight into dynamic analysis capabilities with this code and should help experienced Simulate users with theoretic knowledge in dynamic analysis to familiarize themselves with this topic. For quotation purposes, it should be available for download on the qucosa server in a couple of weeks, too (see www.saxsim.de).I also added a chapter with enhancement requests for dynamic analysis and a list of known code issues (SPR) from own project experience with possible workarounds, if existing. I’d appreciate if other users doing dynamic analysis may comment this to see if this matches their experience, and if they have additional wishes or remarks.Here the topics of the presentation:Introduction to dynamic analysis theory in Creo SimulateModal analysis (standard and with prestress)Dynamic analysis, including analysis classificat
The hidden config option "intf2d_out_stroke_text" was added to Creo 3.0 M060 to provide the abilty to create a PDF that exactly matches what Creo generates during printing. With this enabled, TrueType fonts are output where available and all non-TrueType fonts (or special characters) are stroked. (No substitution.) In Creo 3 it made sense to hide this option since it was a change in functionality. In Creo 4 this should be the default behavior for "Use TrueType Fonts". The font output to a PDF should exactly agree with what is printed without have to locate and enable this hidden config option. This would bring align PDF creation with current printing behavior.Furthermore, if this functionality cannot be made the default behavior and must remain a separate selection during output, then an option needs to be added to the different APIs to allow setting this via automation. (Toolkit, etc.)https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS205845
Excellent video! Thanks for posting.
Carl,12.03 in is 305.562 mm, so the reader is inches.
Good day everyone,For those attending LiveWorx, here is the PTC Community location - please stop by and say hello.See Xtrifuge in the center of the picture, the Community booth is to the left in the Customer Success area.I am happy to write that I will be sharing the area with the PTC/USER board.Looking forward to seeing you in person.Best,Toby
Tom,In order for the text (and dimension lines) to show up in color in the PDF export, I selected standard colors and not system colors in the Format tab. The image in the lower right is a snippet from a PDF export and shows the .125 in blue and the 100.0° in black, because I changed the .125 to a standard color (I didn't try other system colors). Now, I have to figure out how to keep the standard color configuration turned on so I don't have to select this every time I make an annotation.
Tom,Thanks for the input. For the below drawing, it appears the only thing that will print in color are datums (axis). Even the blue dimension lines, GD&T symbols, and datum symbols all print in black. I used the same settings for the PDF export, selected Color and unchecked pentable.
Based on Case:https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=13639405(Issue 241442)In the document view the text filter only applies to visible content but it should apply, like all other filters, to the complete item content.
Based on Cases: https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=13639315 https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=12140188 https://support.ptc.com/apps/case_logger_viewer/auth/ssl/case=11991881 PTC Community Discussion: https://community.ptc.com/t5/Windchill-Systems-Software/When-check-in-text-files-with-n-line-terminator-are-modified-to/td-p/251762?ProductFamily=Integrity&art_lang=en&posno=3&source=search PTC Article: https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS92954&source=Case%20Viewer Problem: Source Integrity always crashes our files under version management when they have inconsistent line terminators. This happens mostly with deliveries from external customers suppliers. To overcome this problem we want to get a possibility that our file content is not changed by PTC toll automatically. Integrity archive CONTENT was corrupted. It seems that '0A' was replaced by '0D 0A' which corr
We offer a lot when it comes to Educational Breakout Sessions at LiveWorx. I know when I attend an event I never feel 100% I built the perfect agenda that fits all of my needs. We understand and we have recommendations.Whether you have interests as a Creo user, an IT Professional, a Start-Up or a Consultant we have hand picked agendas that are catered to you. Visit the full agenda page on LiveWorx.com and choose the agenda that is right for you.TrainingsWhen building your agenda, don't miss your opportunity to take advantage of all training opportunities at the event.Monday and Tuesday offer full day trainings - these trainings and pricing are listed as part of your registration process. Or if you are currently registered, log back in to your registration click "Add Registration Items" to purchase a training - seats are limited and filling up fast.1:1 training opportunities will be offered in the User Experience Center - typically this is reserved for users to offer their feedback on P
My 2-cents worth probably won't help, but I've never had any problems opening prior .prt files from any version going back to V18, and I'm on Creo 3 now. On-the-other-hand, all of these prior models I built, not obtained from another source.
ThingWorx 7.4 covers the following areas of the product portfolio: ThingWorx Analytics, ThingWorx Utilities and ThingWorx Foundation which includes Core, Connection Server and Edge capabilities. Highlights of the release include: Source Integration: Improved integration framework making it easy to connect with external systems, including a standard Windchill connector, to retrieve data on demand. Industrial Connectivity: New Industrial Gateway and Discover navigation tool simplifying the mapping of tags to properties, including performance enhancements for data updates. Edge/CSDK: Build process improvements, Subscribed Property Manager (SPM) enhancements, asynchronous service requests and TLS updates to increase developer productivity, improve application performance and strengthen security. AWS IoT Connector: The latest version 1.2 of the Connector allows customers to more fully leverage their investment in AWS IoT. It features improved deploymen
Watch this webinar replay to learn about the new ThingWorx 7.4 Release and the new updates. The ThingWorx 7.4 Release provides updates on: Synthesize: Analytics Contextualize: Next Generation Composer Source: Integration Framework AWS IoT MS SQL Server Industrial Connectivity C-SDK Engage: Advanced Grid Tree Grid Administer & Manage: Security Licensing Integral Installer
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.