Recently active
Srikanth,You can change all the units in an assembly at once as shown in the below figure. Make sure you check Include Submodels, and this will change all components to the same units as the assembly.
Hello everyone - I hope 2014 has been treating you well!It's only 10 weeks until the start of the 2014 PTC Live Global conference in Boston - can't believe how fast it's coming up. I was chosen to do three (3) presentations this year though I dropped one from the list - too much to do and not enough time. I hope you will come to hear what I have to present:CUST 113: "So you chose PTC Windchill - Now What?"CUST 312: "Training and eLearning: Precision LMS and You"These will be the 7th and 8th presentation I've done and the excitement of sharing what I've learned and experienced never gets old!Having the conference in Boston this year is a great change of pace, and being there in the summer versus the technical committee meetings each January will definitely be warmer !I'll be posting information and my thoughts in the coming weeks and while at the conference - hope to see you there!Best regards,Mike Brattoli
Perhaps there is more than one problem within this discussion? I couldn't even mirror the attached part (pb113041.prt.1.zip). Could you?
Thanks Bill. That's exactly what I was looking for, because it defines all the options and it is a searchable document.
Think you’re the rock star of the engineer designers? You’ll have to prove it. In a few days, you’ll have the opportunity to participate in a contest to demonstrate your imagination, creativity and design ideas. And the prize will showcase your superior skills: The winning design will be featured at this year’s PTC Live Global.More info to come soon. Start your engines!
Gregory,First, there is not a way to list units in the Tree Column, and I have submitted a Product Idea on this. You may vote on it if you like in the attached link.http://communities.ptc.com/ideas/4021Second, yes, there is a way to change all the units in an assembly at once. See the below image.
Giulio,There is way to mirror and keep the features apart from the parent part, as I have demonstrated below. I mirrored the below part and kept all the features. This was performed under Save As>Mirror. So the software will work, but I couldn't do this with your part, as there are some features within your model that cannot be mirrored. Try suppress everything but your first feature and see if you can mirror it.Figure 1Figure 2Figure 3 Mirrored Part
Hello Gregory,If I understand your question correctly, you want to "take a list of parts and their respective materials and calculate the entire mass of an assembly and its components and ouput it as a list". I think Creo already has this capability. If you will look at the below image, I have a column that shows the mass of the assembly and each component. Then I generated a report that shows a list of the mass of the assembly and the components (Figure 1).As I build the assembly, Creo will calculate the mass of each component under Mass Properties. Just go to File>Prepare>Model Properties>Mass Properties and select the Calculate button, then Save.Then you will want to set the Tree Column to show the mass of the assembly and components. This will give you the at-a-glance capability of the entire assembly (Figure 2).This may not be exactly the way you want it, but it will give you what you want.Figure 1Figure 2
Here's the IDD instructions for Creo 1.0 (at least it's Creo), and the models that go with it.
Here's the IDD instructions for Creo 1.0:
Thanks Jakub...that's it.
Where can I obtain Creo IDD instructions? I have the IDD instructions for WF4 from PTC.
What does 2140864 do for drawings?
Creo does not have visible_annotations_scope Is there another method for creo?
When you're in drawing mode, perform a Save As and look for the pdf extension. Creo (Pro|Engineer) already has the capability to save drawings in the pdf format.
Go to: File>Manage File>Delete Old VersionsThis will delete all the old versions or "duplicates".
That doesn't work for me, as shown below.
Here's a discusson of a similar problem:http://communities.ptc.com/message/220717#220717
I think you can RMB on the dimension and change it under Properties.
You may try using the config.pro optiondefault_dec_placesand set the number of desired decimal places, as shown below.
The attached link from PTC will explain how to set decimal places.https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS139243
Try setting the number of decimal places in sketcher. Go to File>Options>Sketcher and set the number of places as shown below. If that doesn't work, there are some other options. Try this first.
Bezpečnostní chyba v kryptografické knihovně OpenSSL neovlivní uživatele PTC Windchill.PTC používá Apache Webserver, který používá OpenSSL 0.9.8, který není touto chybou postihnut.Podrobnější informace naleznete zde:https://www.ptc.com/appserver/cs/view/case_solution.jsp?n=167588
Hi Sylar,You can change the language to Chinese if you selected to install Chinese during setup. Please read my response in the attached link on how to change the language to German. Apply this same process for Chinese, and it will work.http://communities.ptc.com/message/228283
What part of the model shows the 6M psi?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.