Recently active
I probably need to start a new thread on this one.
Read the first line (question) in my problem statement.
The problem is the leader line is removed after I make the note flat to the screen. Setting the config.pro option did not correct this.
Is there way to make the note normal to the screen without breaking the leader?
I made a simple assembly with some exploded lines, saved the model, then re-opened the assembly. The exploded lines are in the model tree, but not on the assembly. How can I fix this?
And the bolts don't re-align with the previous saved assembly.
“Visualization in Creo View is 23 times faster than Creo Parametric” says Bill Ryan from PACCAR. I had the pleasure of speaking with Bill about Visualization and publishing technologies at the recent PTC Live event in Boston.Here’s an interesting perspective from Bill about How, What and Where of Visualization technology.Continue reading
Are you refering to the advanced fastener tool or using a solid fastener?
I recommend submitting this under Product Idea.
Does Creo 3.0 have the capability to make dash exploded lines?
Okay. I see it now, as I have shown in the below image. Thanks.
Toyota Motor užívá PTC technologie již řadu let včetně PTC Windchill. Letos v létě plánuje Toyota přechod na PTC Creo 3.0. Aktualizace by se měla týkat Creo Parametric, PTC Creo View, PTC Creo Layout, PTC Mathcad a PTC Creo Flexible Modeling Extension (FMX).Dodávku a technickou podporu včetně školení PTC produktů v České republice zajišťuje firma AV ENGINEERING, a.s.www.aveng.cz
Nový typ zobrazení neaktivních komponent v PTC Creo Parametric 3.0Neaktivní komponenty jsou zobrazeny průhlednou šedou barvou. (styl lze řídit konfigurační volbou) Dodávku a technickou podporu včetně školení PTC produktů v České republice zajišťuje firma AV ENGINEERING, a.s.www.aveng.cz
Nyní máte možnost zapnout reálnější zobrazení modelu v PTC Creo Parametric, které ztmavuje povrchy, které jsou blízko sobě.Dodávku a technickou podporu včetně školení PTC produktů v České republice zajišťuje firma AV ENGINEERING, a.s.www.aveng.cz
Please see the below image. I was wondering if exploded lines can be made in assembly mode. I sketched in a dotted line as an example.
It is a smart move to move from Solidworks, because Solidworks is about to become a thing of the past.
Every day, manufacturing engineers face the challenge of ensuring that process plans and work instructions accurately reflect the current engineering design. Paper-based work instructions have been used to disseminate information about various steps of the process. Quite often, these are laminated and hung on the walls in the shop floor. This works well until an Engineering Change Order comes through... Continue reading my article on the Creo blog here.
How many emails have you ever exchanged with your colleagues to debate the cause of an interference issue and who is responsible for fixing it? If they had used PTC Creo View to check for interferences, these issues could have been identified early on in the process, thus helping to reduce the chances of rework – See more on the Creo blog here.
Creo Simulate 3.0 now has the capability to account for the stiffness of the fastener with a preload. The desired preload can be entered without having to make another run to account for the stiffness. The below example shows 100 lbf entered for the preload, and 100 lbf is shown in the run summary after the analysis.
Creo 2.0 is the release that everyone is racing to implement. One factor driving this adoption is the compatibility of Creo 2.0 with Windchill PDMLink 9.1, Windchill 10.0 and 10.1. Other factors are the compelling functionality as well as the widespread agreement that Creo 2.0 is ready for “primetime”. With this article, we will dive into the ribbon interface in an attempt to bring everyone up to a common level of understanding as well as clarify several areas where early adopters of Creo have had questions. Getting Started with the Creo 2.0 Ribbon InterfaceThe ribbon is a series of tabs and icons arranged horizontally at the top of the Creo application window. Figure 1On each tab of the ribbon, icons are arranged together into groups of related commands. (Figure 1) Each group of icons may also have an overflow panel that has additional commands that can be accessed by clicking the small arrow. (Figure 2)Figure 2The icons themselves may be different sizes. (Figure 3) For example, some
Creo Simulate 3.0 has provided a way to account for stiffness in the fastener when using a preload. When you check account for stiffness, you may enter the desired preload and only one run is required. The images below show where a 100-lbf was entered for the preload, and the axial load was checked in the run summary to be 100-lbf.
Hello! It's been quite a while since my last blog entry, but our eSupport Portal has been a busy hub of activity: Over the past six months, we've been very busy implementing improvements to our eSupport Portal - both on the tools that you use to self-serve (e.g., Case Logger, Case Tracker) and on the content that you read through links and from searching our Knowledge Base. You are hopefully also aware that we were honored to receive -for the second year in a row - the coveted ASP Online "Ten Best Support Website" for 2014 - an award that is due in large part to you, our customers, who take your time to share your input and participate in our eSupport Portal alpha and beta programs! This past June at PTC Live Global, my team and I had a great opportunity to spend at least an hour with several of our customers to get their feedback on our new search platform UI and UX. The input we received was excellent, helpful, and actionable, and you'll all be able to experience our new Search later
If you have made all the load cases with its own unique load set identificaton, this will make the analysis run much longer.If this is not a multi-body contact analysis, I would recommend putting all the loads under one load set. It will greatly decrease your overall run time.Or try running just one load, and see how long it takes.
Are the eight loading conditions under one load set, or do they each have its own load set? You can overwhelm the system by creating too many load sets. Look and see if all of your loads are under one load set. Send a screen shot of your load set model tree.
PTC recently released Creo View 3.0 in May 2014 and here are the FIVE key updates/enhancements in this release. These are around Zoom, Compare, Measure, Edit and Touch. This is the first post in a series of posts that I plan to cover about What’s new in Creo View 3.0 M020. Stay tuned for my next post in this series…. Continue reading →
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.