Recently active
This is the recording for the morning session The slides for both sessions are located here https://community.ptc.com/t5/Service-Parts-Management-Blog/SPM-Advisory-Group-February-Meeting-Usabi...
Is there a way to give users visibility to Segments and Segment Coverage without giving them access to create/edit/delete segments? It appears that rights to Segments are only defined under the Admin Setup Rights>Segmentation and are either Allowed or Not Allowed.
Logging on behalf of Sharon Langley-Anderson. She is receiving an IP Comparison Failed error when trying to access the Community. Screen shot attached.
These are the slides from the sessions The recordings are located here NA/EMEA - https://community.ptc.com/t5/Service-Parts-Management-Blog/SPM-Advisory-Group-February-Meeting-Usability-Improvements-Part/ba-p/535363 APAC - https://community.ptc.com/t5/Service-Parts-Management-Blog/SPM-Advisory-Group-February-Meeting-Usability-Improvements-Part/ba-p/535441#M30
I have done the Configuration of config.json to connect EMS to Thingworx Core for Communication and tried to execute the file using Command Line and getting the following error (Please see the attachment)I am also attaching the config.json file.
Hi,I want to monitor TX application post deployment in all aspects like memory usage, CPU utilization, performance and if any of our user created thingworx services went down etc.Is there any tool available in PTC to monitor the same or suggest me any paid tools also?
Hello ThingWorx Partners, The ThingWorx Community migration is upon us. I wanted to be sure you saw the announcement from our Community Manager, Linda Frembes below. Once migration is completed we will do our best to bring all partners onto the new private partner community. If you have any questions please don't hesitate to ask. Thank you, Melissa DiEgidio, ThingWorx Partner Enablement Manager Community going into read-only mode - Sunday 9pm ET to Monday 9am ET The ThingWorx Community on the Jive platform will go into read-only mode at approximately 9:00 PM Eastern Time on Sunday, Feb. 11th until our cutover to the new merged community on the Lithium platform at approximately 9:00 AM Eastern Time on Monday, Feb. 12th. During this time, content on the Jive site will be visible but no actions can be taken on the site (such as new posts, replies, etc.) More information about the migration can be found at https://community.thin
Some migrated accounts from Jive will show "N/A" as the username. This occurs because there was no username chosen in the Jive platform. To resolve: Go to your profile settings and input a username. Click the "change username" button and the "N/A" shown on posts should resolve.
Role-based onboarding guides
The Developer Programs team has successfully upgraded the hosted trial on the Developer Portal to ThingWorx 8.2. Hosted trials are available again for existing as well as new users. We reset the trial period of all affected users, giving them an additional 30 days to explore ThingWorx in a hosted environment. We will send out an email to all affected users later today, informing them about the upgrade and the extension of their trial period. Upgraded versions of the Foundation, Analytics, and Industrial Connectivity trial are now also available for download.
ThingWorx 8.2 Available for Download! 2/2/2018 Key Functional Highlights ThingWorx 8.2 covers the following areas of the product portfolio: ThingWorx Analytics, ThingWorx Utilities, and ThingWorx Foundation which includes Connection Server and Edge capabilities. Highlights of the release include: ThingWorx Foundation Next Generation Composer: o Fewer clicks with new navigation o Full Import support for Entities & Extensions o New editor for Projects to manage entities o Editing of localization tables, style/state definitions, networks, masters, gadgets, menus, persistence providers, authenticators o Additional capability in SQL Services, Remote properties, Duplicate, Logout pages and more Mashup Builder: o Collection widget which allows replication of mashups and content in flow and table layouts o CSS property on widgets for defining and binding style cla
NEW - October 9th @ 11:00 am EDT: ThingWorx Analytics 8.1 Release Update for PartnersDuration: 2 hoursTopics to be covered:New Value PropositionSuccess StoriesFunctional ImprovementTechnical Considerations: Install, Deploy, MigrateWebex Link: https://ptc.webex.com/ptc/onstage/g.php?MTID=e15261873dfcbd1b2a397b43882645e62
The Developer Portal is going to have a short-term outage for the hosted trials.Existing hosted trials for all active users will be terminated on February 1st. We are currently in the process of upgrading the ThingWorx hosted trial to 8.2. During this period, hosted trials will not be available until the upgrade is complete. We are expecting to have everything back up by mid/end of next week but are dependent on the delivery of ThingWorx 8.2.What does that mean for? During this outage, we encouraging all users to download any of the ThingWorx trials and install in their local environment for a period of 120 days.As soon as the upgrade to 8.2 is complete, all affected users will have their trial period reset. Our team will send out an email to these users notifying them about the availability of their trial.Melissa DiEgidio, ThingWorx Partner Enablement
Hi, I installed the Thingworx Trial Edition.By now it worked quite fine but this morning the docker container responds to "docker-machine ls" with a timeout.I'm experiencing this behaviour on two different computers.Anyone had this problem before?
I have installed the opc aggregator from the support.ptc. Created a thing with remote opc endpoint template and configured the properties in OPC server. But connection to TW is not happening,i am getting the error says 'websocket closed'
move to https://community.ptc.com/t5/Discussions/bd-p/ServicePartsDiscussionsLink to post: (Can Servigistics Custom Tables display/edit more then 500 rows?) by @kbillinghurst-2 https://community.ptc.com/t5/Servigistics/Can-Servigistics-Custom-Tables-display-edit-more-then-500-rows/m-p/346369#M682 <body><p>I have a custom table with 1995 rows in it. I added the custom table to the Servigistics product. When I edit/view the rows in this table, only the first 500 display. Is there a setting somewhere that would allow me to raise this row limit on the recordset?</p></body> This message has 2 replies
Creo 4 introduced the concept of creating a mid-plane. This function is great to add a plane in the middle of a part you have access to. What about when you want to assemble a part that already has a mid-plane to a part that doesn't? I can't create a mid-plane because the part is released. In reality, why should I have to edit another part when I simply want to center a plane of part "a" between 2 surfaces of part "b"? Is there a function or trick while assembing to account for this in the same manner as creating a mid-plane? (I don't want to add a mid-plane in the assembly)
Go to "My Settings" and check your subscriptions:
Please be sure to subscribe to discussions, ideas, and blog.
Email Global Distribution Owner to remove user Email Global Distribution Lists Remove role to user in Community Go to the user profile page PTC Community In search tool, change from All community to Users Input user name Click Submit Click on the user name Remove role to user Scroll to bottom Under Manage roles for [Username] X the role NATSIdeaExchangeReviewer (Board Member) NA TS Admin (Member)
Agenda: ThingWorx Manufacturing Apps - Christine Bahmer, Connected Operations Solution Manager ThingWorx Developer Portal - Michael Aglietti, Vice President Developer Program Partner Community Announcements - Melissa DiEgidio, Program Manager, ThingWorx Enablement Q&A ↓ Download Link Below (view in My Videos)
I install thingworx analytics server for windows but it Error.What should I do?
Note: This enhancement is about improving the existing Forecast Analysis page based mass overrides functionality.Functional Overview:Visibility to existing forecast overrides in the systemAbility to mass override (such as percentage increases/decreases) for a group of parts for a period of time.In memory application of the overrides right on the same screen.Ability to use the recommended forecast with the overrides in Inventory Optimization to see the effect in inventory investment.Ability to clear the overrides. Application Industries where promotional campaigns are used to influence demand such as automotive etc.Lifecyle management for a product including new product launch, end of life etc.Closing/opening a stocking location. Benefits: Proactive measurement of the inventory cost for a set of mass forecast overrides. May help with promotion planning.Visibility to existing overrides in the system.Easier collaboration.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.