Recently active
Mark,Just fill it in with one solid extrusion up to the surface. See below image.
If you vote on a Product Idea, and you discover later that Creo has the capability and doesn't require the Product Idea, how do you remove your vote?
However, there should still be the option to remove your own vote for whatever reason. For example, someone votes on an idea, and later decides that maybe the idea is not so great afterall, perhaps just an impractical idea after some extensive research.
Ryan,Good point. In this particular case, only a couple of days had elapsed. So the bottom line is that there is no way to remove a vote once voted upon. I made the recommendation to the originator to amend the Product Idea to have the functionality added to core Creo for those who don't have ISDX. Or he could just start a new idea.
Antonius,Nice work. Do you think the same could be done with the Style tool with less effort?
I've done this in StressCheck with a hand mesh, where I had created small elements to represent the size of the bonded area. In Creo, you could make little surface regions to represent the bonded areas instead of using points, and this will give you the strain over that particular area, but not average. A strain gage area is so small to begin with. I haven't tried an average over a surface region, and I will look at it tomorrow.
Brad,It's greyed out when you select Analysis for Mass Properties, because I think it is PTC's intent for you to select the CSYS then read the desired density of the entire assembly or at the component level.
Lawrence, I submitted a Product Idea to have a Group for drawings, you can view it in the attached link: . - PTC Community
Dan,Now I would recommend exporting the NX as IGES and Creo as IGES and import the two and see if the points are in the same location.
Dan,There was a slight difference in points when not doing with ISDX. The point on the surface without using ISDX was about 0.007" off from the point created using ISDX. I zoomed in to measure the distance between the two. Zoomed out, you really can't tell the difference. So it's a little off.Figure 1: Two IGES FilesFigure 2: Point Measurement
Dan,I created this point on the surface without ISDX, and I will have to compare it to the one made with ISDX by overlapping the two as IGES files. That will be the proof. I'll do that after lunch.
The functionality is available with ISDX. Here is the link: https://community.ptc.com/t5/Creo-Parametric-Ideas/Point-quot-On-Center-quot-Of-A-Surface/idi-p/471377
Do you not have ISDX with your Creo application?
Dan,When I first responded, I didn't make it very clear. Sorry. I have now provided you with the instructions on how to do it. Hope this helps.
PTC LiveWorx Europe - 10 Gründe für Ihre Teilnahme!Als Teilnehmer wird man Teil des am schnellsten wachsenden pan-europäischen Netzwerks von Experten aus Produktentwicklung, Service und IoT. In diesem Netzwerk dreht sich alles um die Themen Produktinnovationen und bewährte Geschäftsmodelle für Herstellung, Betrieb, Vernetzung und Service von intelligenten Produkten.Lassen Sie sich von neuen Möglichkeiten in diesen Bereichen inspirieren und profitieren Sie von den Einblicken in eine visionäre, vernetzte Zukunft!Erfahren Sie mehr unter => PTC LiveWorx Europe | PTC17.-18. November 2015 | ICS Messe Stuttgart
Aufgrund der großen Nachfrage haben wir unser kostenloses Schulungsangebot während der PTC LiveWorx Europe erweitert. Ab sofort werden wir auch 4 Einheiten zu PTC Integrity Themen anbieten:Folgende Schulungen stehen ab sofort zur Verfügung:Dienstag, 17. November 2015:13.00 – 14.45: SysML Modellierung mit PTC Integrity Modeler15.00 – 16.45: SysML Modellierung mit PTC Integrity ModelerMittwoch, 18. November 2015:11.00 – 12.45 Requirements Engineering mit PTC Integrity14.00 – 15.45 Create and Automate Any Process with PTC Integrity Process Director – Dieses Training wird in englischer Sprache gehalten! Wie für die bisher angebotenen PTC Creo- und PTC Windchill-Schulungen, können Sie sich auch für diese neuen Themen voranmelden. Allerdings ist nach wie vor nur 1 Voranmeldung pro Teilnehmer möglich, damit möglichst viele Besucher an einem Training teilnehmen können. Dennoch empfehlen wir zudem, sich vor Ort nach kurzfristigen Verfügbarkeiten zu erkundigen. Unser Team am PTC University-Stand
Hello all,l had a dream about the world where each texture is repeatable with smooth transitions. Simply because: "Ich bin auch ein industry-artist!".How to make renders more realistic when my textures looks like cave pictures from Stone Age?See following idea:1) Single JPG file crates octagonal shape with bad transitions.2) Need to create better JPG file with smooth contour. Using standard PAINT tool from Windows.3) See final smooth texture4) Result- smooth texture with repeat possibility- better renders- now it is only about texture quality (high resolution)--------------------------------Hope it can helps...Best regardsMilan
The PTC Live Global 2015 program featured 80+ customer-led sessions featuring best practices, tips & tricks, and innovative uses of PTC solutions. We recorded a few of them, and are now making them available through this group so you can benefit from your peers’ lessons (if you didn’t attend), or re-live them (if you did).Our first session is “An Admin’s Guide to System Evaluation,” presented by David Haigh, a CAD Administrator and Designer at Lawrence Livermore National Lab and award-winning PTC Live Global presenter.Haigh’s presentation is about measuring system performance and ultimately providing tools to pinpoint and resolve problems. He shows how to make it easy for all of your users to benchmark their systems, and how to create your own benchmarks and measure things that are important to you. He also shows you how to measure system performance so you can see how long it takes to download from your PTC Windchill server to your local cache.Watch this video now and stay tuned f
Hello There,The source and objects are not getting removed when implementer request moved from (*TST) environment to Live environment.However implementer removing the source/objects when moving the request from Development to *TST.I have checked all the configuration and same a Development environment.Regards,Mohammad Muzammil
Meeting minutes EU PS AB - Sep. 17, 2015ParticipantsLinda LamotteVincent BourdinFred ValenteThomas OschmannJuergen Daus (Organizer/Host)Topics to be discussed:1. Calendars Currently on-going by Thomas: a group calendar being created in OutlookContent to be visible in SharepointPeople can invite this calendar address to any meeting/activity to be sharedIt seems people are supposed to be documenting all they do already in Thot and this practive is very much followed in GermanyThe Thot calendar is really not user friendly, there is no way to know at a glance what people are doing as you have to over on the activity to know what/where they are. There is no visible categorisation. It is just to know what, if the people are available or not. I like the idea of sharing with other TSEs which customer related activity I´m doing that others might relate to and contact me about.What are we trying to achieve that cannot be done with Thot / What are the problems that
Dan,I talked with a top contact in PTC today about this, and I forwarded your Product Idea to him, since it has some nice screenshots, and requested instructions on how to do this with a UDF. I also furnished this post.
Dean,I read some articles yesterday where ICEM could be used with CATIA, ANSYS, NX (formerly UG), etc., and I saw that ICEM Ltd, UK, was an independent software not developed by Dassault, but Dassault acquired it in 2007. So when you made the statement, "Software like ICEM and CATIA", I don't know where you're coming from. Isn't ICEM now part of Dassault? Anyway, I really enjoyed your response, but I was looking more for something on the visual rather than verbal. And I didn't comprehend why you stated PTC will never have a Class A software. Is is that you're predicting that the developers at PTC will never have the knowledge, skills, and abilities to compete with CATIA for Class A surfacing?
Because we’d like to know what you think about PTC Live Global, we’ve organized a contest where you can have fun and win prizes while sharing your opinions. Each Friday, from March 13 through May 15, we’ll ask an “If you” question. Those who respond will have the opportunity to win a $200 gift card. There will be 1 winner who will be chosen by the rest of members of the PTC Community.Let’s get started with this week's question:If you had to describe PTC Live Global in one or two sentences, what would you say?To respond, click "Add a comment" belowSee here the rules of this contest.
The ThingWorx Composer and Mashup Builder help companies build and deploy IoT applications in a fraction of the time it used to take. These tools simplify the application design and development process that enables this developer, within minutes, build an app that brings together the data, activities, and events from People, Enterprise Systems, and Smart Connected Products.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.