Recently active
Are you using Creo 3?
Is there a way to open a ".model" file in Creo Parametric 2.0? A ".model" file is a CATIA native file, and I can open them up in CATIA, but not Creo.
For manufacturers today the Industrial Internet of Things (IIoT) is front and center in virtually every business publication and also the central focus of almost every vendor from automation suppliers to enterprise software suppliers’ sales and marketing programs...There is no doubt that the IoT is transforming commerce in several industries; one only needs to look at Uber, Netflix or Airbnb to see examples of whole new business models in the consumer sector. Understanding how to translate that into the manufacturing sector has proven to be the challenge.To be sure, manufacturers have been connecting manufacturing assets together for a long time...However, LNS Research believes that manufacturing and allied asset intensive industries like mining, energy, and utilities are on the verge of radical changes brought on by the convergence of information technology (IT) with a host of operational technologies (OT)....Typically one of the proof points for the value of the IIoT and smart devic
Community,When I select Perspective View after selecting Shading with Reflections, Creo uses a default background picture, as shown below. I went into Perspective Settings, and I didn't see a way to disable the background picture. I want the Perspective View with Rendering without the picture. Is there a way to do this?
Charles,I went to SAXSIM, and I couldn't locate Jakel's presentations. Do you know the full URL path? Thanks.
Charles,I'm extremely interested in what PTC has to say about this, if they even come back with a response. I would love to see an explaination from their developers as to why Creo will not perform the analysis as well as ANSYS.
Good point Herbert. I research the functionality before I submit a Product Idea by presenting it before PTC support. In other words, I'll contact PTC support when I'm attempting to do something in a PTC product, and when PTC replies that it can't be done and I see where other software like CATIA and NX can, then I submit the Product Idea. I've only submitted a few Product Ideas to enhance community help, etc. But most of them are for Creo Products, especially Parametric and Simulate, and none of them have even been considered for future development. The main reason I posted this question in the first place is that a PTC employee told me that one of my Product Ideas wasn't getting enough votes, so then, I replied, okay, "How many votes does it take?" If PTC is going to say you need "x" number of votes, then okay, how many? But you see, it appears they, PTC, are not going to commit to "x" number of votes, of course, assuming the Product Idea is a
This is the product to perform CFD with Creo.https://www.ptcusercommunity.com/docs/DOC-5303
Denis,I've seen all kinds of tube fabrication in industry, but I haven't seen this type (in your image). Do you have an actual picture of the metal tube after fabrication?
When you go to your own profile and look at the Product Ideas that you submitted, it doesn't add the total number of ideas at the bottom or top of the web page. Add the capability to the web site to allow total summation of Product Ideas that the end user submitted.
Mats,That's okay. I was wondering if Charles presented his results to PTC support, since ANSYS seemed to work better than Creo (the problem with a smaller block on top of a larger block) and working with friction.
Just when you thought the Internet of Things couldn’t possibly live up to its hype, along comes a blockbuster, 142-page report from McKinsey Global Institute (“The Internet of Things: Mapping the Value Beyond the Hype”) that says, if anything, we’re underestimating the potential economic impact of the Internet of Things. By 2025, says McKinsey, the potential economic impact of having “sensors and actuators connected by networks to computing systems” (McKinsey’s definition of the Internet of Things) could be more than $11 trillion annually.According to McKinsey, there are six reasons we may be underhyping the Internet of Things.1. We’re only using 1 percent of all dataWhat McKinsey found in its analysis of more than 150 Internet of Things use cases was that we’re simply not taking advantage of all the data that sensors and RFID tags are cranking out 24/7. In some cases, says McKinsey, we may be using only 1 percent of all the data out there. And even then, we’re only using the data for
Richard,Yes, Creo can do this easily, as shown below. Select a Plane that you want to intersect. Select Section>Planar. Drag the arrow back-and-forth to see a dynamic cross-section.
Patrick,I know about the p-element version vs h-element, as I was just wanting to hear what Mats thinks about this since it was his post about ANSYS and the smaller elements vs Creo. I've attached a document from PTC on the contact theory used in WF4, and a lot of this is still in Creo.
Colin,I made a quick example of your idea, and I used the swept blend function, as shown below. If you'll upload your curves, I will see if I can make it for you.
Charles,Were the results from your Creo and ANSYS studies presented to Creo Technical Support?
Mats,If finer elements is the reason for capturing abrupt changes in nonlinear models using ANSYS, then why couldn't Creo do the same, as you can make finer elements in Creo too?
Hi Colin,Did you get this to work?
Community,Has anyone tried to load and run Creo products Parametric and Simulate on Windows 10?
Mark,How long is the event?Will participants receive a certificate for attending with the amount of hours on the certificate?
Charles,Is this the same type of analysis you attempted in Creo from your previous post?
Mats,Can you elaborate on the statement,“I guess the P-method makes it more difficult to implement nonlinear functionality, which is undoubtedly much better in ANSYS than in Creo Simulate.”Thanks.
Here is a response from PTC:https://www.ptcusercommunity.com/message/417860#417860
I know it's not supported, but I was just wondering if anyone has gotten it to work. Thanks for the response.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.