Récent
Test community thread
I am using Windchill Navigate (formerly ThingWorx Navigate) Release 10.1 and Datecode with CPS 10.1.0 test case for navigate
Test case for mathcad
testing - checking
Test case for Creo Parametric
Test case for Mathcad
test check thread creation
Issue with Mathcad basic user>> Issue logger
Installation issue for Creo Parametric >> Community
Issue logger for community
Welcome to the PTC Issue Logger
test
This is thread from Mathcad Issue Logger
I am using Creo Parametric Release 11.0 and Datecode11.0.3.0; in a single view, the hatch of a section is not completely shown. In a different view with the same charatheristics, the hatch is correctly shown.
Hello, I want to perform a forced conversion of Assembly to WAssembly in the asynchronous invocation mode. Currently, I am relying on the pfcasync.jar. I noticed that there is no WAssembly in it. What should I do?java.lang.ClassCastException: class com.ptc.pfc.Implementation.pfcAssembly$Assembly cannot be cast to class com.ptc.wfc.wfcAssembly.WAssembly (com.ptc.pfc.Implementation.pfcAssembly$Assembly and com.ptc.wfc.wfcAssembly.WAssembly are in unnamed module of loader 'app') at com.po.creo.service.impl.ConstraintServiceImpl.getModelData(ConstraintServiceImpl.java:77) ~[classes/:na] at com.po.creo.controller.ConstraintController.getModelData(ConstraintController.java:22) ~[classes/:na] at java.base/jdk.internal.reflect.DirectMethodHandleAccessor.invoke(DirectMethodHandleAccessor.java:103) ~[na:na] at java.base/java.lang.reflect.Method.invoke(Method.java:580) ~[na:na] at org.springframework.web.method.support.InvocableHandlerMethod.doInvoke(InvocableHandlerMethod.java:258) ~[spring
I am using Creo Parametric Release 12.4 and Datecode12.4.3.0Subject: Creo 12.4 + Windchill: J-Link Model.Rename() always returns XToolkitCantModifyWe are migrating a Java J-Link workflow from Creo 6 to Creo 12.4 in a Windchill-linked environment.In Creo 12.4, Model.Rename(newName, false) fails consistently with XToolkitCantModify for both .asm and .drw.Isolated test (minimal):1. RetrieveModelWithOpts() on MAC_NEXTAIR_2.ASM and MAC_NEXTAIR_2.DRW2. CheckIsModifiable(false) => true3. CheckIsSaveAllowed(false) => true4. Model.Rename(...) => XToolkitCantModifyManual rename from Creo UI (same environment) works.We reviewed CS419079 / CS419066 about read-only policy since Creo 10, but our case is unclear because modifiable/save-allowed are true while J-Link rename still fails.Please confirm:1. Is J-Link Model.Rename() supported for Windchill-managed models in Creo 12.4?2. Is checkout mandatory for rename in this context?3. Is there a known difference between UI rename and J-Link rena
I've created a J-Link application, which has a swing GUI. On click of a UI command button, I'm creating a part files (simulating File--> New Part). The same thing when wanted to simulate through a swing GUI in synchronous mode, the GUI gets created, but when I push the button in the GUI, the GUI hangs. Can any one help me in making the swing GUI work with PROE?class MenuButtonListener extends DefaultUICommandActionListener { public void OnCommand() { try { //This works Session curSession = pfcGlobal.GetProESession(); Model tryModel = curSession.CreatePart("Testing"); tryModel.Display(); //This doesn't work //How to make it work csProe.StepToProeGui.createAndShowGUI(); } catch (Exception x) { STEP_TO_PROE.printMsg("something wrong: " + x); x.printStackTrace(); System.out.println("------------------------------------"); } }}
When you are trying to install Creo Elements/Direct Model Manager on a Server with multiple network interfaces, it is a more a gamble than a real specified process, whether the installation will succeed or not.Even when you have succeeded in installing Model Manager on a server with multiple network interfaces you may get wrong answers from the http://<server>:9898/ port, where IP-address is mentioned again.....In the past the typical server within a CAD installation had one network interface working (simply unhooking the cable) and everything goes fine.In the meantime you will encounter other configurations:1.) network interface to the management net2.) network interface to the production net (e.g. 1GBit)3.) network interface to the production net (e.g. 10GBit)4.) network interface via the USB connection to the KVM system used for dealing with problems standing directly in front of the rack.* When the algorithm within the product selects the wrong interface during the insta
Hi,I have a large assembly and would like to create a clear, step-by-step single animation. I am planning to use different simplified representations to generate clean exploded views for each stage of the animation.However, in the Animation window, I can only see options to control explode states, timing, and view orientation. I do not see any option to control or switch simplified representations.Could you please let me know if there is a way to operate or include simplified representations within the animation sequence?I would appreciate any guidance or suggestions. Kind Regards,Sunil Kotte
I've got an odd one and was wondering if anyone else has experienced this/has a solution? I have been using Creo 11 parametric with an educators licence. Yesterday I was creating a fairly basic drawing, upon saving the drawing it crashed on me (this isn't a regular occurrence). When attempting to re-open the drawing it 'loaded' but nothing was displayed, no template, model or annotations. I closed the program and tried to open different drawing, but this time only the template and annotations loaded in, no model visible. Loading parts and assemblies also became difficult, with components not rendering properly. Often models would load in only as wireframe even if a shaded option was selected, also on occasion large orange triangles will be displayed around the part? After trying various options I uninstalled Creo 11 and re-installed with Creo 12. I am finding that the same issue is still occurring? The drawings sometimes load in partially/completely if I open the part f
I have a simple part (modeled by somebody else or imported).It has some phantom lines that I can't hide.In 3D model space, If I set to "wireframe, no hidden" there are still hidden lines that shine through.Same thing happens if I make a drawing from this part.It may be a configuration setting rather than part issue, since the lines do not show up on other people's machines. Creo 11.Any help will be appreciated.
Hi experts i have doosan s310 smly mill turn with fanuc series 18-t control..i need post processor for creo.
Hello everyone, when Ι try to install creo parametric 12.4.0.0 Ι get this message and the creo parametric cant fully installed. Ι have try to install the latest java and the java 21 and still have the same problem. And then the pop up window shows about that my hardware cant be qualified for the photo render studio but when Ι run the hardware check utility , it shows that my hardware is qualified as you can see for those in the attached files.Please give me an advice for how to solve that problem.Thank you
I am using Creo Parametric Release 8.0 and Datecode8.0.12.0The mapkey doesn't wait for the simulation to end in the Material Removal (Module Works).Once the simulation is started in the Module Works window, all buttons except the Stop button are disabled until the simulation ends.How can I add a script to the mapkey that queries the window and waits for the simulation to end?Thanks
Hi All, When applying tolerances to dimensions, if I select Symmetric the box is greyed out so I can't enter a value. When I select Plus-Minus only one box appears for the minus value. This problem has just appeared and is present if I try to alter the tolerance on the model or the drawing. I have Creo 5 and 11 installed on my PC and the problem is present in both versions even though they read different config files. When My Colleague opens the files on his PC the problem isn't present. Symmetric selected:Plus-Minus selected: Any help greatly appreciated! Kind regards, Clive
Vous avez déjà un compte d'utilisateur ? Connexion
Pas encore de compte d'utilisateur? Créer un compte
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.