Recently active
Hello all, would love some help on this if possible. I am very new to Creo, done about 5/6 hours elearning but still stuck, i have been given a set of files which i want to dissect and get back to a possition where i can send parts off to be laser cut. as you can see from the attached file / photo the file is made up completely. I would like to get back to the sides, bottom etc. (if that makes sense). I have access to the .prt files and the .pkg files. from the owner who designed this in creo a number of years ago. Thank you in advance, i have tried a number of things but i am a bit out my depth here 🙂
I am using Creo Schematics Release 7.0 and Datecode7.0.0.0I have a file which appears to be corrupted it should have 8 design sheets but it will only open 7 of the 8 sheets. The file produces the C++ assert failure which crashes Creo Schematics. We will recreate the design. But how do we prevent this as this message C++ assert failure, appears more frequently with Creo Schematics 7.0 (was never in Schematics 4.0). And the design has internal error 002 when you open it. But cannot do design check to repair because it gives C++ assert failure and crashes. How to resolve or work around this issue?Here are the errors that I facedInternal Error 002, C++ assert failure
As shown in image I want to draw a part. Part includes external skeleton model (called out by merge/Inheritance feature).I want to minimize the area shown with yellow color.It should be as per Desh line (green color). I have tried with partial view, but it shows the error after increasing the side of component beyond the defined boundary. Is there any settings which change the area based on hidden item?Here skeleton model is called out by merge because I want to call the dimension in drawings, by import geometry, dimensions did not appear.
Hi, ProSelect dialog goes back , can not be top. User can not check ProSelect processing is stopped. (if ProSelect dialog was hidden status.) so we try to make ProSelect dialog position in top. 1. using timer callback function. 2. using ProSelectionPostSelact Funtion. method 1 is worried about performance about timer func and creo work. method 2 is not work if select item is not matching filter. if you guys have good idea, please help us. thank you.
good morningI have a problem in my Creo version 7when I create sections in the presence of imported objects the sections show lines that should not appearI need to work with objects imported from Step and Iges of a fair amount of complexity. Therefore I cannot fix the errors and I let broken solids and surfaces be created.In the images that I post below the view from 3d is shown in "no hidden" view and the section of the 2d model, as you can see the section shows the objects as if they were in "wireframe" view In the definition of the "view display" view it is marked "no Hidden" and it is actually like this for all the solids of the drawing that I created, but not for the imported objectsIn the definition of the "section" view by selecting model edge visibility>area the section correctly shows only the sectioned volumes I definitely need to solve this problem because in some sections it is not possible for me to work correct view in 3d section bad view in 2d sect
How do you always get the correct Length and Width value of the flat pattern bounding box in a parameter designated for Windchill? Creo automatically generates the feature parameters SMT_FLAT_PATTERN_LENGTH and SMT_FLAT_PATTERN_WIDTH within the flat pattern feature. With a simple relation such as "FP_LENGTH = SMT_FLAT_PATTERN_LENGTH:FID_[FID]" this can be copied to a user-defined parameter which can be designated for Windchill. So far, so good. However, the issue is with regeneration without having the flat pattern activated (supressed). This doesn't update the parameters and wrong info is sent to Windchill. Even when going through a cycle of activating the FP, regenerating the model, returning to the bend state (FP feature suppressed), the parameters will often return to an old value.The issue here is that the SMT_FLAT_PATTERN_LENGTH/WIDTH parameters don't seem to exist when the FP feature is suppressed. Is there a way to always get the correct value from the
Are people using Object Toolkit (C++)? We have several Creo custom utilities written with Toolkit (C), but I was curious if other developers have switched to using Object Toolkit (C++) when possible. Here's my current understanding of the 2 APIs: Toolkit (C) Pros: The API wizard HTML is great (<creo_loadpoint>\Common Files\protoolkit\protkdoc\index.html) Ability to search for API commands and to click on hyperlinks for more information. Easy to find example code on many of the older APIs (sadly many of the newer Toolkit (C) APIs don’t have example code). I believe Toolkit (C) has more API commands than Object Toolkit (C++). Can still use C++ code with the Toolkit (C) code. Toolkit (C) Cons: Strings are overcomplicated. (char vs wchar_t, ProLine, ProName, ProMdlName, etc.). If PTC changes the length of a string (ex: ProName (32) to ProMdlName (180)) then you may have to make updates your code. Memory management – need to allocate and free memory. Can lead to a
Hello all, I am trying to change a configuration option using C++ toolkit. But I am facing issue to know the correct syntax. Can anybody please provide me with syntax?
Is there a way to see the material definition for a step file in Creo View?In Creo 10, I am able to select the option for "Material Definition" when I create the step file. However, after exporting the step file and opening it in Creo View, I don't see any way to view the materials I had original defined in Creo 10
Hi,I have installed CREO Parametric version 11.0.0.0.0 on my Lenovo Thinkpad P53s on Windows 10 and I am experiencing a severe performance issue (I had the same problem with version 9.0.0.0 by the way) Characteristics of my Laptop :Operating System : Windows 10 Pro version 22H2Processor : Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz 2.11 GHzInstalled RAM : 48.0 GB (47.7 GB usable)GPU 0 : Intel UHD Graphics 620GPU 1 : NVIDIA Quadro P520 GPU1Problem Description :When moving a model on the screen or simply opening menus in CREO application, the graphic suddenly freezes for one or two seconds, making the work really annoying. After a while, all seems
I have several part files in session. In all but ONE file, I can select multiple features in the model tree and group them. What prevents the ability to select multiple features in the model tree?Post note:Re-starting Creo, then the issue for that singular model is resolved.This phenomena re-occurs every now and then with random models.
Is there any way to propagate Creo Schematic drawing parameter to Windchill? Please suggest
I am using Creo Parametric Release 6.0 and Datecode6.0.4.0Arial WGL is offsetting the limit tolerance. Is there anyway to align the upper + and lower - tolerance? Also the mu symbol in the micrometer is not displaying when convert to PDF. Please help.
When attempting to install Creo 9.0 with a student license, all is working well until the 'Install' button is hit. When attempting to use the install but, it simply closes the setup launcher and does nothing. It gives me no errors or anything else, just simply refuses to work, and closes the launcher.I've tried putting the files in a different directory, didnt work.I've also tried disabling all firewalls, didnt work.Post closure of the launcher a PTC folder is created in the desired location, but it not populated with anything.Any help is greatly appreciated.
Hi..Is there any setting in Creo Simulate in order to fully utilized the specification of my new workstation?Currently my new workstation is running a stress simulation and the time elapsed is almost equally same with my laptop . Below is the spec of my laptop and workstation:Laptop: Processor: 12th Gen Intel(R) Core(TM) i7-12800H 2.40 GHzGraphics Card: Nvidia RTX A2000Memory: 32GB New Workstation: Processor: AMD Ryzen Threadripper PRO 5995WX 64-Cores 2.70 GHzGraphics Card: Nvidia RTX A5000Memory: 256GB
I'm modeling an object that I want to add embossed/debossed text onto, in a manner similar to what's illustrated here. I want to be able to make the text easily editable, because it will serve as a label providing identifying information on the different permutations of this object. If I try to go back and edit the text in the original sketch, it breaks the offset command later in the feature tree, because the specific curves that were projected in order to define the sketched region to offset no longer exist. In the offset command, is there a way to tell Creo to project whatever closed curves exist in the original sketch, such that when the sketch is edited to include new text, the offset feature will be updated to reflect the new regions present in the sketch it's projecting from? Apologies if any of this is weirdly phrased or if this is an obvious question, I'm a beginner in Creo. Using Ver. 10.0.3.0
A change in functionality is being considered for a future release by Product Management, but no timeline can be committed to at this time. Is this the new "Product working to specification"? I have received this on the last 3 tickets I opened. Translated: Yes, we recognize this is a bug but no we are not going to do anything about it. Anyone else getting this same message back from PTC Support?
i created a layer with 2 model annotation and one datum plane in creo model if i hide that layer na the datum plane is hided but the model annotation not hided its still visible. Is there any other way to hide selected model based annotation in modeling UI? Thanks in advance Ram - Designer
So I have imported a part from Solidworks to Creo and I no longer have access to the Solidworks account. How do I check the dimensions of the part in Creo, even though it was originally saved as a Solidworks part? Thanks!
CREO 8.0.5.0. Parametic / Manufacturing / Material Removal SimulationWhen closing material removal simulation in manufacturing, CREO is crashing. In the past, I have chalked it up to be a large amount of sequences(Large programming file). But today, it has crashed more than a handful of times. And the program has only 7 sequences so it is on the smaller side. I tried to re-create the crash and not been able to do it. I have made a point to close the same way every time inside of the material removal simulation. Does anyone know what I am doing wrong? And how to fix it.
is there a recommended way to package the install of creo via intune? and is there an easier way to set the config settings? the config for schools.bat is all well and good for one PC but i need to send this to up to 30 computers
as far as I know it's a problem that exist at least since PRO-E WILDFIRE 3.still present in CREO 9. every time that I edit a view on the drawing, to rotate that view (i.e. a 3D view of the assembly or part), the planes show-up and I have to manually remove the visibility of these planes.it's happening every single time.if I toggle the visibility off then close the editing view (Drawing View) then I'll redo it again, the problem came back again; rotating the view toggle the visibility of the planes back again and I have to remove manually.the problem is limited to when you use the "View Orientation > Angles" part to orientate the view.if you rotate the view with the other orientation method the problem will not appear. before asking there I tried to read articles, search on-line etc. and I can't understand if it's the cad not properly set-up or it's something that has been designed that way.maybe it's me that wasn't able to find the right search keywords?I tried also search
I'm reading the following article (https://www.ptc.com/en/support/article/CS420647): Trying to unbend sheetmetal through Creo's C++ TOOLKIT provided example (without user interaction) results in memory access exceptions no matter what I do. Looking for alternative solutions, I've found the article above. At the end, it says I could use the following functionsProCmdSmtFlatPat()ProCmdSmtUnbend()Using Creo's interactive mode, but I can't find any reference forthis mode neither for the functions listed.Where can I find these two functions?
Hi, i'am using Creo Illustrate 9.1.Is it possible to rename the parts in the sbom with "use alternate part names" in a way, that a published U3D-file has the alternative part names?At his point this feature just uses them to display the names in the sBom, but doesn't really rename anything.
Dear PTC CEO and programers. Deae PROE FANSI wrote this to the PTC, but no response. Forward message>I am using PROE WF5 PRO/nc as cad/cam system CAD is OK I like it. BUT!!! CAM-PRO/NC is not a CAM. When you make something new it is 80% buttons an menus, but engine is the same all the time.You are making olny small changes. Your "CAM" can not compute toolpaths on backround (multitasking)It is not using multiple core technology, I am siting on my chair an waiting for hours. (I have XEON64bit 8GB RAM HP Z400) So wake up PTC. You have a lot of bugs in your "CAM" I am not your employe tester. Bugs are in re-rough, Rough, Finishing, Profile, local mill and surface steps. There are bugs and engine is not good too. I am using EDGECAM too. If you will sleep, I will throw proe away.(to the recycle bin) Sorry for my english. It is bad, but it is better then then your "CAM" You have two options 1.new engine for PRO/NC 2.integrate pro/toolmaker in pro/nc Bukaj
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.