Recently active
1. Describe the Problem ProUIAction does not have any settings for Row selection. 2. Are you using a workaround?Handle actions on ProUITable rows via ActiveActions that configure separate ProUIButtons.3. What is the use case for your organization?ProUIList provides a good selection environment for users. For example, when multiple selections are required, users can easily adjust the selection through the L-Shift button. When a list that combines multiple elements is required, ProUITable can be used. When using ProUITable, L-Shift affects cell or row selection. Selecting a cell and selecting L-Shift like a checkbox is not a good experience. In order to provide an experience like selecting all/deselecting all like the checkbox of ProUIList, a separate button is required. This button requires two elements, one for selecting all and one for deselecting, and provides a messy UI. If the checkbox is located separately, it can be combined with the MIXED state to provide a richer experience for
Working with Creo 10 Rev: 10020:I created a new drawing and with "show annotations" I can show dimensions of my part features in all the views.But when I click on a shown dimension the tolerances tab is grey and I'm not able to show tolerances of the activated dimension in the drawing. I can add/see/edit this tolerance of dimensions in the part itself.Even More strange is, that in old drawings this works without a flaw!Can you tell me what I do wrong?
1. Describe the Problem Reference: Ticket - 17702670 Article - CS438511 Currently, if we want to specify a certain ecad area to be void of more than one type of region, we need to create separate features. As we try to progress with our ecad mcad collaboration journey, we sometimes hit bumps in the road. We try to remind each team that overall, the process should be quicker. However, we clearly have a workflow here where it is not quicker. Working with a drawing, the engineer can reference one sketch and manually type in that it is for placement, routing and vias - quickly. However, now, they need to spend time to create and manage 3 features. Although this may not seem to be a big deal for some, for others it is. I believe there is room for improvement, where one feature can control all 3, with collaboration. 2. Are you using a workaround?Creating multiple features.3. What is the use case for your organization?See above4. What impact does this problem currently have o
1. Describe the ProblemWe are seeking for automatic way as inheritance feature already under machining part, we require output as below picture were casting row will add below machininging row with below format only.2. Are you using a workaround?No Work around, We have raise a PTC tech Support request Ticket Number: 176733463. What is the use case for your organization?To create BOM extraction from Creo to Upload in SAP PLM4. What impact does this problem currently have on your organization?We need to do it manually and take more productive time, we need to reduce time by Automating this process.
Currently, there is a ModelCHECK configuration option in the condition.mcc file called MODEL_TYPE. And it allows the following 8 values:PRT_SOLIDPRT_SHEETMETALPRT_SKELETONPRT_PIPEPRT_HARNESSASM_DESIGNASM_INTERCHANGEASM_MOLD_LAYOUTWe'd like to request that this list includes additional model types - notably entities created in the piping module, harness assemblies, and envelope models. We'd like to run different ModelCHECK items on them based on their model types.Right now, we are looking at using a parameter as a way to differentiate model types that are not part of the 8 supported types shown above. But we'd rather have PTC support it though ModelCHECK.Thanks.
Hi,I created a subassembly that I wanted to export for the top-level assembly. Since the subassembly file size is huge, I can't use it directly in my top-level assembly. Could you please suggest if there is a way to export the assembly (envelope) parametrically so that I can use it in the top-level assembly?
Using the piping module you can use the Pipe Solid to create pipe parts.These pipe parts have no material. You can add material in the line stock but like many options in creo, this doesn't do anything (doesn't even change the weight/length in the same menu lol)My question is simple: How can I add material to the piping parts (without doing it manually for every single piece of pipe ofcourse)I can think of two options:Option 1: Through the line stock material option.but since that option doesn't do anything...Option 2: Through relations. In the linestock I can fill in stock number which shows up as a parameter in the part. I want to add a relation to the template of the pipe part (still have to find out which template it uses and how to modify it) which basically says: IF stocknumber == A, then material =A. IF stocknumber == B, then material =B etc. Can anyone help me out?
Creo 9.0.6.0Dear PTC team, I want to figure out how to customize Ribbon via Creo TOOLKIT. To do it I launch an example from Creo 9.0.6.0\Common Files\otk\otk_cpp\x86e_win64\obj called otk_install.zip. When the auxiliary application is active I see that the Ribbon has changed and have a new group (20250228_screenshot_1.png). To save Customized Ribbon I follow the next steps from the User's guide:1. Go to File -> Options -> Options2. In "Creo Parametric Options" window go to Ribbon press Export->Save Auxiliary Application user interface. Then I check resulting toolkitribbonui.rbn (attached) or creo_parametric_customization.ui (depends on Export option) and can read nothing cause the encoding is incorrect.It seems strange cause initial file otk_install_test.rbn is readable. What 's interesting is that if I try to import Ribbon from the creo_parametric_customization.ui file, it works seamlessly, which makes me think
Hi I have a rotating mechanism that travels a total of 60degrees. An inner part rotates with an outer part for the first 40 degrees, and then stops rotation and moves in a linear vertical direction for the last 20 degrees. The vertical motion is driven by a ramp on the inside surface of the outer part. See screenshots. I'm using creo 3. Can anyone help show a good way to set up this connection? I have the 2 parts moving correctly independently but I can't figure out how to make the parts move together correctly.
1. Describe the ProblemThe ProAnnotationTextstyleSet() function from Creo Toolkit will change the font style of an entire system generated note, instead of individual lines. If you want one line to have a different font style than another on a system generated/parametric note, you must change it manually.. The issue is described in this article: https://www.ptc.com/en/support/article/CS1635602. Are you using a workaround?Manually changing the font style3. What is the use case for your organization?The standards require that view scale, detail view and section view notes have size 6 filled font on the first line, and non-filled font on the second line. Users must manually change the font settings in order to achieve this. However, if ProAnnotationTextstyleSet() had the capability of changing each line's font individually, then we could create a tool that would do this automatically;4. What impact does this problem currently have on your organization?More time and cost spent ma
1. Describe the ProblemWould like tools to improve the quality and length of time it takes to detail drawing. Much of our work is very similar but may just have different number of holes/features etc.. We have a vast library of previous drawings that a new drawing should be similar to.The AI tool should be able to recognize how we layout our drawings and create views, display model dimensions, adjust tolerances, update/create datums and GD&T tolerances. I know PTC believes drawings are going by the wayside, but we still use them. I believe the vast majority of your customers also still use them. This could then eventually also be applied to MBD. 2. Are you using a workaround?None available3. What is the use case for your organization?Improve the quality and length of time it takes to detail drawing.4. What impact does this problem currently have on your organization?Consistency, Quality, Performance.
Salve Ho scaricato da sito della PTC Creo Elements Direct Modeling Express 8.0 (English).All'accesso mi da il seguente errore: Come posso fare per risolverlo?In attesa di una risposta vi ringrazio anticipatamente. Ciao
Hello! I would like to ask the community about the mesh validation. There is a tool for it in CREO Simulate that is useless for a big simulation models (100000+ elements) it is impossible to turn the model while the mesh is displayed. So is there any feature or tool that will help to hide the valid elements and show only bad elements on the screen. Thank you for the response!
Hello, I've been trying to find those files all around Windchill and my local PC but didn't succeed in that. Where does creo simulate save mesh files?
Hi,I am getting the error pop up when trying to save file in a Specific folder. "Error Writing file; check disk space or write permission." * This Is the Error I am Getting Error only on 3 Specific folders only. (I have all access permission. to the drive). Other folder in the same drive are working fine. 1. I have created a new folder tried to save some files it works fine but when i copy 11GB of all drawing file and paste it in the same new folder i am getting the same error.2. i am able to copy and paste using file explorer it works.3. only with CREO i am getting error writing file. Recently our organization changed local Server to Cloud Server from then i am getting the error. Kindly help me in Resolving this issue. Regards.SAM
We have some models that are Creo 10 and some are Creo 9. We are working with another company that can open Creo 9 models and not Creo 10. Is there a way i can save Creo 10 models to Creo 9 without losing features and Metadata?
1. Describe the ProblemWith the introduction of Tables in 3D mode, PTC has made an important step towards MBD with Creo 11. What we are missing here, is the opportunity to re-use data from the 3D file properties, such as Name, Number, Weight, etc. so basically the repeat region feature which is available for tables in 2D mode.This is currently explicitly excluded in the PTC Documentation:https://support.ptc.com/help/creo/creo_pma/r11.0/usascii/index.html#page/whats_new_pma/mbd_create_tables.htmlLimitations: Currently, Creo does not support tables with repeat regions. When you place a table with repeat regions, a message appears in MBD, and the table is placed as a simple table.Feature Request would be to enhance the tables make them re-use attributes already available instead of manually typing all the information into it.Documentation for Repeat Regions: https://support.ptc.com/help/creo/creo_pma/r11.0/usascii/index.html#page/detail/Understanding_Repeat_Regions.html2. A
Hello I ran the setup.exe file and i get this error message: V:\pim\x86e_win64|installmgr.dll is either not designed to run or Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0xc0000020 Does the setup has to be installed in the desktop as opposed to a mount drive? I am not sure if is the dll file itself or my Windows 11 (i do have window universal c runtime as MS visual c++ Redistributable). I read somewhere here to download the dll file for creo 2.0 but i havent seen one for creo 10. I am still on the fence if it could be something else thanks
Hi,I have to create three Datum Axes with name D, E, F, based on a custom Coordinate System ("CS_DEF"), which is rotated relative to the original (XYZ) coordinate system.My problem is that, if I create a Datum Axis based on the axis of the coordinate system, Creo puts the axis name on the opposite side of the direction of the coordinate system's axes.How can I move the name of the axis to the opposite side?thank you
Hello All,Just wondering how people go about creating simplified models of sub assemblies. The specific thing I am working on is an assembly with several different bearings. While I want to keep the bearings in the assembly and it is nice they look like bearings when sectioned etc I would like to to simplify them. By simplify I mean ideally turn them into a single part. The bearings currently are as downloaded from the bearing supplier and each one has a dozen different parts. For this project I want to keep everything in a single folder and having lots of bearing parts is making it more difficult to see the other parts. Also I have to email assemblies and it would be better if the bearing was then just one part, instead of several. I could remodel the, but this seems time consuming and unnecessary. I also could Shrinkwrap them, but this creates external surfaces only. Any recommendations would be appreciated.Thank you.
At present a customers uses IsoDraw CADProcess for creating cgm files with hotspots. Customers would like to switch from IsoDraw to Creo Illustrate, but hotspotting functionality is missing in Creo Illustrate. Thank you and best regards, Jozef.
Hi All, My PTC supplier adviced me to reinstall Creo and update to a newer version to get rid of another issue.I used to work with 8.0.4.0 and now I'm on 8.0.12.0, the previous issue is gone but now I got an even worse issue back!In this new version I can't get mechanism constraints to work. No matter what I do I'm not able to finish the constraint since it keeps saying "Connection definition is incomplete".Normally when I make a simple "Pin connection" I select an axis or round surface to align, then two surfaces to determine the rranslation and when this is done a new definition set appears to define the rotation. Now it will never show this rotation definition and I can't finish the constraint either. Any idea what this could be? Can it be a setting somewhere or is it a bug in the software? Thanks in advance!
I want to hide a part of an assembly in one of the detail view of the drawing but the parent view must have that part to be shown.Can anyone help me on this.
So yeah , I was told that there wasn't a way to have Creo Illustrate deal with part change rolls of like XYZ-001 tolled to XYZ-002 without having to remarkup the whole dang file again. Or deal with multiple versions of said file that were 95 percent the same with various small options that changed it. Well figured it out.
An option to automatically purge features in a model with no internal or external reference. This is for cleaning the model after finish the model.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.