Recently active
Hello all,Is it possible to create a surface from a file containing XYZ point info that is formatted like thisContour 1 +0.00015719 -0.00385578 -0.00240279 in +0.00000000+0.00015722 -0.00485578 -0.00205918 in +0.00000000+0.00015724 -0.00585579 -0.00172874 in +0.00000000+0.00015727 -0.00685579 -0.00141855 in +0.00000000+0.00015729 -0.00785579 -0.00109718 in +0.00000000+0.00015732 -0.00885580 -0.00080014 in +0.00000000+0.00015734 -0.00985580 -0.00048563 in +0.00000000+0.00015737 -0.01085580 -0.00016993 in +0.00000000+0.00015739 -0.01185580 +0.00013890 in +0.00000000+0.00015741 -0.01285581 +0.00044022 in +0.00000000+0.00015744 -0.01385581 +0.00074184 in +0.00000000+0.00015746 -0.01485581 +0.00107004 in +0.00000000EORThere is only one line stating "Contour 1", then a boatload of point data followed by the "EOR".I can read this into excell and reformat it a bit, but the only point data examples that I have seen are always formatted like this.Begin section ! 1Begin curve ! 11 5 0 02 4.890738
Article Reference - https://www.ptc.com/en/support/article/CS130629 Ticket Reference - 15522083 Currently, the dtl option default_bom_balloon_type will only work if the drawing is already created and the symbol is stored within the drawing file itself. This makes using custom symbols very tedious to use with a repeat region. We have to use a mapkey to bring in the table and load in the symbol at the same time. The option default_bom_balloon_type should bring it in automatically when drawings are created form formats.
I have a question regarding the compatibility of our Expert Moldbase Extension (EMX) license with Creo 11.0. Currently, our EMX license details are as follows:Feature Name: 192Feature Version: 40.0Expiration Date: 01-Apr-2026From my understanding, Creo 11.0 requires EMX 17.0, but our license seems to be associated with an older version (possibly EMX 15.0, which matches Creo 9.0).I would like to confirm:Does Feature Version 40.0 correspond to EMX 15.0, making it only compatible with Creo 9.0?Is there any way to use this EMX license with Creo 11.0, or is an upgrade required?If an upgrade is needed, what is the recommended process for acquiring an EMX 17.0 license?For a newly purchased EMX license, does it have to be downgraded by two levels to match our current license?I appreciate your guidance on this matter. Looking forward to your response. Best regards,Lan
Hello, I'm looking to see if Creo (3.0) can support GD&T with a Position tolerance on a hole, representing directions of X and one for Y. With the image in this post, I'm looking to create a Size on the Hole, with two position tolerances: X and Y (or a specific direction; no diametrical zone). This will represent a rectangular zone, rather than a diametrical zone.
Hello everyone,Unfortunately I have lost my settings. So far I have been able to restore more or less all of them.What is still missing is the antialiasing when exporting 2D views with 300dpi and *.bmp.I have now spent 3 hours looking for the right setting....without success.Then I saw that there are also ‘Settings’ under ‘Publish’.Here I edited the entry ‘Creo 2D’ under ‘Publish/’2D images’ and set “Antialiasing” --> “High”. Unfortunately, this does not work.Questions:- How do I set antialiasing when exporting 2D illustrations?- Why are there separate settings ‘Options’ and ‘Publish/Settings’?- Why is the needed setting not under ‘Options/Global’, but only under ‘Options/Illustration’?- And why in God's name does a trained engineer have to spend 3 hours searching for the right setting? Best regardsRamon(Siemens-Energy)
We use Creo 9.0.4.0. I have created a piano hinge from an imported STEP file. This involved cutting the fixed hinge and reassembling it so I can change the open angle of the two leaves of the hinge. The screenshot below shows the assembly list of the part. After closing out Creo for the day 0n 2/22 and attempting to work on the file today, Creo crashes and I get this error message:I found that I can open asm.1 and asm.2 outside of the working directory, but the .asm more recent of .1 and .2 cause Creo to crash. Has anyone experienced this?I developed a work-around by copying asm.2, renaming it. I can get the assembly to open. Why would the latest files crash?Any insight would be appreciated. Thank you.
In sheetmetal a user can create a bend order sequence. This means setting up a bend order sequence in the sheet metal part that can later be accessed by the drawing and displayed with Show Model Annotations to display a bend order table. In that report there is a line item referring to the number of bends. It would be very useful to have a sheet metal parameter that has the total number of bends in a sheet metal part, that can be referenced without the need to create a bend order table and manually inspect the table to report the total number of bends. Could a sheet metal parameter be added that updates automatically and lists the number of bends in a part as an integer eg. SMT_PART_BEND_QTY
Add the ability to tolerance x, y, diameter, and depth in the hole table. Add further description to the hole table so its the same as a hole callout. Make planes/holes selectable to add to the hole table. Prevent refreshing of the hole table from erasing tolerancing information Maybe just do some basic market research and see how everybody else does a hole table and copy that.
Currently, only one IMAGE is created in the PDF export from the 3D model.In order to use the MBD functionality, it is also necessary to influence the representation of the export formats.When creating the PDF from the 3D data, the same functionality should be available as in the 2D drawing like the pentable.pnt file.
Currently Creo OTK Java API does not support OpenJDK. Read CS296661 Since 2019 January, Oracle is charging for a Oracle SE subscription that cost 2.5$/user/month. I am opening this IDEA to request support. Does any developer tried to use OpenJDK even if PTC is not supporting?
In Sheetmetal unbending creates bend notes. Currently it is possible to modify: - symbol for type and direction of bend note. - add inner or outer radius - angle It is not possible to define which angle is shown in Bend Note - supplementary or complementary. It is quite simple in some other softwares. Suggestion for PTC: - Current config: smt_bend_notes_order &type&direction&angle - Modified config: smt_bend_notes_order &type&direction&angle (&type&direction&comp_angle)
The Alt key + rectangle selection functions in CreoParametric 4.0 drawing can be used to select objects other than those that can be selected in the active tab.This function is very difficult to use. Please change the function of Alt key + rectangle selection to the function that can select all like CreoParametric2.0.
Hello Community ! We have an asynchronous toolkit app developed, which have to authenticate at PDMLink. After successful authentication the program is working on several objects in batch mode. Unfortunately, there is a timeout on the server side for each session, that prevent working day & night for this program. We need a toolkit function, which gives us the possibility to check, whether the authentication is still valid or not. Please vote, thanks for support !
When "Save copy" of a 3D model as a PDF with visual visible edges or hidden edges, it should be able to influence the line thickness via the pentable.pnt
At the moment the Import Type to choose between Part OR Assembly is greyed out when import JT file in Creo Parametric. We want to be able to choose the import type between Part OR Assembly when importing a JT file in Creo Parametric as soon as possible. See article: https://www.ptc.com/en/support/article/CS295442?&language=en
When importing a STEP file from Creo using the ap_214is protocol (created with annotations), the annotations are split into individual elements. The annotations are assigned to the combined view AGZ_FRONT. The notes should not be split.
See the screenshot below, this functionality exists in other packages. The mirror feature needs an option "replace copied geom". Important notice ; the surface ID's should remain the same. The ultimate goal would be to create a family table part that can be replaced in an assembly without having reassemble any children (f.e. bolts).
This Idea is about adding a parameter that contain active simplified representation name which is used in drawing. Please vote for this functionality.
One of the most frustrating changes since moving to creo 3 is that everytime I need to measure something I am required to hold my pinkie down on the control key. WHY?! Do you think engineers are accidentally left clicking everywhere? If I am left clicking then I intend to select something when I am in the measurement tool. Get rid of the control key. Left click to select geometry. That's it.
Currently there is no setting to export transparency information. You can read this in CS22317.But You can nowhere read when it will come. The problem is that other vendors support this feature.It's time for Creo to have settings for the export as STEP with transparency as well.
1. Describe the Problem Reference: Ticket - 17688221 Article - CS438652 We were trying to create a mapkey that turns off the navigator bar. The trail file shows: mapkey(continued) ~ Command `ProCmdNavigatorBtn` 0; - this is supposed to turn it offmapkey(continued) ~ Command `ProCmdNavigatorBtn` 1; - this is supposed to turn it on However, when generating a mapkey, the 0 or 1 will just toggle the navigator. Meaning, you can run the mapkey 3 times and it will turn off, turn on, and then turn off again. It should not be like this. A 0 should be off and a 1 should be on. That's how 99% of all other commands work. All on / off or open / close commands in Creo should ensure they are not toggles, so people can properly write mapkeys that are repeatable and work in all situations. 2. Are you using a workaround?No. We just hope the user has the correct setup before they start the mapkey, or else it won't work as designed.3. What is the use case for your organization?We are tryi
1. Describe the ProblemHi,I suggest combining the "Optimization/Feasibility" and "Sensitivity" modules into one. There are no differences between the dialogues except for the "steps."These modules are widely used. Separating them into two dialogs necessitates a double setup, as almost every optimization process is preceded by a sensitivity analysis. 2. Are you using a workaround?No3. What is the use case for your organization?All development processes4. What impact does this problem currently have on your organization?Simplify procedures
Hello All, I am thinking to Virtualization Creo 11 for users ,Did anyone has done it already , What are the minimum hardware requirements Please share your views and experience Thanks & RegardsThangadurai Ganesan
Hi, I have certain questions pl. help me in finding solutions 1) How to know whether the installed creo is installed with VB API ( means it supports VB files) 2) I want to create or the modify the part dimensions through VBA (excel) to easily modify the part without doing it manually ( means opening the part and editing the dimensions) will it be possible? if yes if anybody has small example(program or the part running through VBA) it would be great for understanding 3) I want replace the part in assembly using VBA will it be possible to do? Any positive response are welcomed Regards, Shubham
I am using Creo Parametric Release 8.0 and Datecode8.0.0.0I am making Custom hardware for the AFX library based on the vendors we use (Automation Direct vs 8020.net) - When I add my new hardware (New Connector Equipment) the first one adds correctly with the right Part number in the model tree (151099.prt), but anything after the first defaults to the base part name (t-nut_ad.prt) which is controlled by the tab file similar to the bolt_kit parts in the 8020 libraryEdited to add - This is the command string when trying to add the subsequent parts which is supposed to be additional 151099:151099 regeneration completed successfully.Part '151099' not changed since last regen.T-NUT_AD has been saved.Select axis as component reference: PLACEMENT_AXISSelect face as component reference: PROFILE_SURFACET-NUT_AD regeneration completed successfully.Part 'T-NUT_AD' not changed since last regen.C
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.