Recently active
Please PTC, could you add transparency view available in Creo View lite ? It is only available in Creo View MCAD, but do you really think this is a "premium" option ? Every free CAD viewer support transparency (edrawing for exemple), and Creo View lite doesn't ! And it may be bundeled in our Windchill licences but it's not free ! And the price of Creo View MCAD licences is way too high for just using transparency... Don't be miser !
Creo View 5.1 should be updated to measure like Creo Parametric 4.0 and later. The use of a "Smart" filter is still in Creo View 5.1 and should be removed. Creo View should default to "Faces" or use the setting that the user can set under the options area. Even with a filter set measure still defaults to picking the model first. Creo View needs to work AT LEAST the same as Creo Parametric or easier. The level of user that uses Creo View is not at the level of a Creo Parametric user.
Creo View can open an AutoCAD file with Blocks if opened natively from a folder.If the same file, along with the blocks, is stored in Windchill the pvz files contains the drawing and the blocks.In this case the drawing is rendered without the blocks.It should correctly render these drawings from a Windchill pvz file.
Ability to lock/fix joints in a model so regardless of rotation they stay together. Example: Model of robotic arm with 'elbow' and 'wrist' joint. Being able to fix these points as joints so when a rotate animation is conducting, both elbow and wrist can rotate at different angles but all can stay together and do not mis-align.
All in the title Today (2016) , we are unable to import native CAD Files from Windchill in Creo Illustrate. ( We can from disk ) CS62588
In MC exceptions can be granted for legacy data. These exceptions look at the Creation Date. Many data are changed and stored over years and still receive an old data control since not the last storage date is considered. This makes it possible to set data with missing layers, unit system, etc. For the designer increases the effort to raise data to the current level. Allerings improves the data quality.for this Issue ist opened a Case C14693019
Presently, changing the value of the search radius options from within a design that uses inch units results in the values being divided by 25.4 when the defaults are saved. Changing other defaults when the design is open in later sessions results in further divisions by 15.4. This spirals into a totally useless search radius very quickly. The natural thing to do is to reset the radii when this is seen, starting the same spiral over. This does not happen when the radius options are changed without an open design. According to the programming staff (as reported by customer service), this is working as designed and no corrective action is needed in the software. I hope that this "feature" was just an oversight rather an intentionally created.The recommendation was to submit it as a new idea, so here it is: If the defaults are changed while in a design, do not convert the units so that they stay the same. Instead of having text on t
Pre-Creo 3.0, our convention had been to change the appearance of the surfaces of ECAD features to a color that was 75% transparent. That way we were able to quickly distinguish between "known solid" geometry like the PCB & the volumes containing "possible geometry" like the ECAD features. But now we're unable to make the ECAD features transparent in the new releases. The request is that you offer the option to make ECAD features transparent. Thanks for considering.
When you publish your sensitive, proprietary, possibly ITAR controlled models for an AR experience, they get sent to PTC's server... somewhere. It's secured by your personal PTC account, which, let's be honest, is not secure, and the AR experience is accessible to ANYONE with the link. This is enabled by default. We have disabled it because this configuration does not meet our security requirements for technical data. We need to be able to customize the server location to go to our own Thingworx/Vuforia server, and have access controls, AND one of the options should be to store it in Windchill, without the need for a Thingworx interface. For what it's worth, PTC promised this capability to me back before AR publishing was made available, then failed to follow through.
Many times when we are working on some heavy components there may be sudden fatal error. which crash Creo because of that unsaved data get lost. Some time designer forgot to save data or if saving take more time then in such condition designer save data after completing his work. In such condition if there is fatal error all work, time and effort is zero. How we can recover lost data if fatal error occurred because we can't save data at that time.Can PTC make such program in that if such error occurred there is counter option to save data or data save automatically .
Please add this functionality to drawings containing sheet metal parts with breaks/rolls in them. If you need help see: SW did it in 2012
You can include an unplaced component that may be useful if you want better remember it's present within the BOM or to make the manufactiring for windchill automatically. But you cannot convert an already inserted component into an unplaced one; you have to delete it and reinsert it as unplaced one.
There should be an API which will reflect the status of WitnessLine Display . i.e Which witness line is displayed which one is erased?
When creating a model annotation, Creo should allow the selection of any references regardless of the current Annotation Plane, and once the references are selected, provide the user a list of valid orientations to choose from.
Thirst thing I noticed is that forces and constraints are still visible even if before I stop simulation I switch it off. I suggest: if simulation is stopped then in model tree it should be suppressed and loads should be hidden - don't you think? There is nothing under RMB at the moment:
Creo can not represent a single hole with a pitch circle in the drawing, even when i create it in the bore dialog with pitch and angle. I have to go through the pattern and then disable the second patterned hole.Why is this second hole needed to represent the pitch circle in the drawing? The information is already available in the PRT with 1 hole. You see it in the Dialog PATTERN
To create a measure of separation, the only option is to make it between 2 points. This is much more restricted than measuring in Creo Analysis Measure, where you can measure between any datum points, planes, axes, coordinate systems, solid geometry, and surface geometry. If the mechanism has an important distance that changes as the mechanism moves, there needs to be the full capability to capture that distance.
When working on an assembly if you select the surface of a component the repeat command is grayed out. You have to either change the filter selection or select the component in the model tree to get the repeat command to be active so it can be selected. I would propose that if a surface or other geometry of a part is selected that the software should look at the parent component and allow the repeat command to be used even if only the geometry of that component is selected.
My proposed improvement is to add an option to the query tool that displays the x, y, z and value data in a table below the query pop-up window (or on a separate pop-up window), so that you can copy the whole table to clipboard and over to excel. This would not be a difficult improvement to implement. A .jpg showing and example UI is attached. Currently when taking average stresses we have to manually copy the query point information into excel and this: Increases the time to analyse results Allows for errors to be made Reduced the number of sample points that can be feasibly used
STL export profile doesn't include default Chord Height, Angle Control, or Step Size. It should. There is no setting available in Creo to set the default values. You have to click customize export every time to set the value
It would be helpful to be able to have a toggle which will show only the suppressed components in the model tree OR be able to highlight only suppressed components in the model tree. There are several useful reasons for this functionality. But one that comes to mind is when you need to delete a component in the assembly and you are unsure of what other components may be affected when you perform the delete. I prefer to first suppress the component to see what other components also suppress due to an assembly constraint or relation. After suppressing the component, I like to navigate the model tree to see all the other components which will be affected once I execute the delete command.
There is no API available to get additional references on independent Datum Target Symbols in ProToolkit. Please implement the functionality. Currently API provides only attachment.
Please allow all (or most) functionality available in model sketcher within drawing 2D sketches. 2D sketches in drawings is currently unusable (even in Creo 5.0). Just adding the ability to dimension draft entities and add constraints to them would vastly improve usability. This area of creo parametric has fallen way behind competitors like inventor and solidworks.
As you know Creo has got a very useful tab that named annotate on 3d environment. We can print our models with format but it's very hard to set the .frm file via pdf output. If we can see format file on screen dynamically it can be more useful. you think- we are working on annotate tab and we will be able to see our format file on screen simultaneously and we will be able to change it.
Default Origin (Corner Point", "Bend line intersection") value should be available under File > Prepare > Model Properties > Sheetmetal > Relief > Change >Sheetmetal Preferences dialog > Reliefs > Corner relief settings
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.