Recently active
How to add user desired symbols like Half moon Topic posted from under the tips section - https://community.ptc.com/t5/Creo-Parametric-Tips/How-to-Add-New-Symbols-to-the-Text-Symbol-Palette-in-Creo/ta-p/821114.
Long ago when I created UDFs for various holes, I could put the corresponding tolerance with the hole. When I showed my dimensions in the drawing, tolerances came over. I'm creating some new .hol files now but can't seem to figure out where to include any hole tolerance. Ex: If I pick a .250 dia hole from the dropdown, what I'd like to see in the model is .250 +.005 / -.001. Obviously I can add a tolerance later, but having it stored would help standardize things for our users Creo 8.0.0.0 Thanks..
Hello dear Community,I am a student having worked with Autodesk Inventor for a while but i am switching for a future employment.When trying to make a threaded hole i select ISO as the thread type and M20x2.5 as the size but then it spits out sizes like 0.6890 for the inner hole diameter wich is propably in inches, but since everything is set to mm it tries to make a hole for the thread thats just 0.689mm in size.Screenshot is attached aswell i couldnt find any solution via google / this forum but maybe i was just blind, if you could give me an answer or point me to an already existing Answer i would greatly appreciate it.Software: Creo Parametric Education Edition (Version 10 i belive)
I recently made some CDF-Live Simulations and thought that the particle animation is really slow.It turns out, when dragging or rotating the part the animation is fluid.GPU = 3080 ti also happens with 2070 Super, and 1660 TI MobileDrivers - Newest and i also tried the latest WHQL driversWin 10 and 11 I checked the Monitor and found that Creo (once the object stands still) lowers the refresh rate to about 3-5 FPS, (usually wanted) , but it also happened when a particle animation is running. When dragging the model the refresh rate jumps to the usual 250+ and the animation is smooth. I attached a short Video demonstrating the effect (sorry for the music and outro, i tried some presets)I searched quite some time for a config Option, but i didn't find much related to refresh rate or CFD-Live.The few Commands i found didn't solve the issueMFG Raimund
I was wondering if the Creo View BOM read in parameters from creo parametric (version 10) assemblies and part files, so that the names, item descriptions e.t.c would match. As well as that I was wondering whether the BOM lists matched in terms of the ordering of items/parts, so that the parts appear in the same order in both Creo View BOM and Creo Parametric BOM.
Hello all, I am trying to assign apperance to creo assembly or part using toolkit. Can someone let me know how can I assign apperance and also define the RGB value for appearance? TIA
I am using Creo Parametric - Release 6.0 (connected) Release 6.0 and Datecode6.0.5.1Need PTC support to change IE browser type into other browser before IE retirement
Hi,I'm using Creo Parametric 6.0.5.1.Is it possible to have different system colors for modelling and drawing environment?In modelling environment, when I enable a section view, the contour lines of the part in the section plane are yellow. I can change this in options -> System appearance -> Letter, but then all text, dimensions and tables in the drawing environment are changed as well. I would like to have different "letter" color for the modelling and drafting environments. Is this possible, or is there another way? My workaround is to have mapkeys to quickly change the letter color to black and yellow, but it feels kind of impractical. Thanks in advance.K
Hi fellowsWe are using Creo Parametrics 8.xxx, Standard configuration metric, ISO. And we are creating our own tables for company standard holes. Question:Is there an option, to feed the hole feature with values out of the tables, to show a fractional number instead of a decimal number.Example:Rp 1/8 is the pipe thread 1/8" for holes with inner threads, If I select this threaded hole from the table in the dimension text menu it looks like: In the existing tables the value 9.73 is included and presented in the model or drawing with prefix Ø.The value 9.73 is the correct dimension, but I like to show the value 1/8 because this represents in combination with the prefix the right size of the threading tool .In the same time, the Prefix Rp should be written automatically to the prefix field of the hole feature's menu. Same as Ø for standard holes or M for ISO threads.Up to now we made this work around: But I don't like to manually entering such text into the dimension text me
I'm trying to roll Creo View out to some pople within our company but don't want to without getting a few things ironed out. One being the publisher. Why does every job with the publisher fail! Has anyone got a way around this? Number 2 see attached, CYS and planes show up when opening Creo View out of both Windchill and ThingWorx. Anyone have a solution for this?
I am using Creo Parametric Release 10.0 and Datecode10.0.1.0Tapered threads do not show up in the dialog box once I add a DEFAULT_CALLOUT_FORMAT_DATA to the hol.-file.The hol.-file has previously worked in Creo 8
Hello, I would like to ask questions about the Creo toolkit. Currently, I need to use the Arc operation on the toolkit at work. This operation will require the input of relevant parameters, such as origin, start_angle, end_angle, radius. What I want to ask about is start_angle and end_angle. For the definition of the two parameters, please read the relevant documents. The above description is as follows: start_angle: Angular parameter of the starting point,end_angle:Angular parameter of the ending point,I would like to ask if you can provide more detailed explanations or examples, such as whether the value of this angle belongs to "degree" or "radian"? And from which point does the calculation of this angle start and end? The above Translated by the Community Moderation using Google Translate 你好, 想請問 Creo toolkit 相關問題, 目前在工作上需要在 toolkit 上使用到 Arc 的操作, 該操作會需要輸入相關參數, 像是origin、start_angle、end_angle, radius. 想詢問的是 start_angle 以及 end_angle 這兩項參數的定義, 有翻閱相關文件, 上面的說明如下start_angle:
Hello, I am working in Creo 11.0.1.0. When making a drawing of a part, I am experiencing an annoying new feature of ordinate dimensions that I have not seen in previous versions (granted we just made a massive jump from Creo 3 to 11). Here is the scenario:In a drawing, I have an existing set of ordinate dimensions. These are placed on the righthand side of the drawing view. If I go to add an additional ordinate dimension referenced to the existing origin (.0000 dimension) the new dimension automatically cleans-up/aligns itself with the origin dimension. This seems like a handy feature on paper, but is very annoying if I want the new dimension to be placed on the lefthand side of the drawing view. This is especially true if I am placing multiple new dimensions and need to individually select them all to drag them to the other side.Is there a way to turn this feature off? In previous versions, the new ordinate dimensions would follow my cursor and not place unti
We are starting to use Creo Schematics and I found settings for a lot of directories, but they all point to my Creo working directory. Are there any example files for templates, formats and other items that are included with an OOTB install of Creo Schematics 9.0.0.0? Any help will be appreciated in setting up this system.
When will the current ISO 21920-1 surface texture symbols be included in Creo Parametric? According to research, the symbols were adjusted in the Creo 9.0 version (ISO 1302 and ISO 25178), but these have now been withdrawn.
when a data table is created within a schematic via; generate report, and the drawing is checked in, the next time the drawing is checked out and the table is needed to revise then it is not possibble to open the table with the error "error<<<<< Unable to read table data file" despite the table being clearly visible/readable within the schematic,. If an old version schematic is opened (ie V4) then then upon opening in schematics (V10.0.0.0) it is possible to modify once. Bug alert!
I have been asked if we can have something on models for 3d printing that we can use as a reference to measure the the printed part to confirm it's accuracy without having to fully dimension a drawing or measure every feature. Of course the easy answer would be CMM but that is not available. So some kind of fiducial would seem to be the next thing to look at.Does anybody do this? If so How?
Hi Folks, I have few question related to Creo schematics as below.1. How to restrict the terminal connections? is it automated or manual? 2. How to show the component label in 2Dschematics & 3Dcabling?3. Real time mass of Harness?4. Do we get the branded or industry standard catalogues like wise TE connectivity with 4 connection ports?5. How to we customize of create our own catalogue in schematics?It would be really helpful to get the answers for the above questions with specific examples if possible. TIANaresh
Hi everyone,I wanted to find a course or video playlist or pdf document about Creo Elements/Direct Drafting (Mixed UI). I'm a newbie and want to self-study Creo Elements/Direct Drafting with Mixed UI interface.Please share me if you have relative document. Thanks advanced!
I would like to request the version 20.3.4.0 of Creo Elements/Direct Modeling. Please provide me with the necessary download links and installation instructions.Thank you for your prompt assistance.
it seems that the function material_param() applies only for numerical parameters. You cannot access string parameters from the material with this function. Is there a method to retrieve a string parameter value from the assigned material?
Three bend cornerCreo Parametric does not have a standard workable way to work with three bend cornersThere are some workarounds, but all have issues. I work with Creo 10.0.4.0.This is my search for a good three bend corner which can be welded.How it should look after bending How the flat should look This way it is easy to weld, with the 0.1mm gap small bend mistakes do not give a problem. Option 1Make quilt Create offset Sheetmetal conversion (no rips and bends on all edges) Surface rip + rip connect (0.1mm rip) Unbend Chamfer Bend back Feature tree from offset and on: Pro’sNot too many steps to createThe 3d looks perfectConsDoes not work in some cases when one or more of the bends is not 90°After unbend, bend back and then unbend again (sometimes after only one unbend) the result will be this.This is not good. Option 2Start with quilt but place a point on the line of the middle bend. This point should be at
I am using Creo Parametric Release 10.0 and Datecode10.0.1.0Importing a STEP242 model (generated from CATIA V5) and the annotation information is incorrectly positioned.It looks fine if re-imported to CATIA V5, or viewed via a 3rd-party STEP viewer, so it seems only Creo has an issue knowing how to position the annotation relative to the 3D CAD
I'm starting to play around more with Creo Flow and am a little unclear about the available options for modeling the boundary layer1) Is there an option to select a laminar boundary layer or is everything just modeled using a turbulent BL with k-eps formulation?2) Are there other turbulent BL options other than k-eps?3) does the k-eps BL option include an intelligent wall formulation, where the cells in the BL that have a y+ lower than some cutoff value are ignored?4) What are some of the levers that I can pull to achieve y+ values in the typically desired range of 13-31?Thanks!MArk
Hi all,I have been loving the new improvements to hole modeling in Creo 10, but I am still very disappointed with the lack of polish on actually dimensioning holes. The hole notes functionality is pretty powerful, but the fact that you can't specify tolerances on those hole values makes it useless for most users in most cases (aside from just specifying tapped holes). In addition, the fact that feature control frames (GTOL) can only be placed on the notes in the elbow style is unacceptable and unprofessional. I know there is a workaround to create a free floating GTOL and then link to it in the note, but that is very clumsy. It's something I would expect from FreeCAD, not a world class CAD system. I would like to see each of the dimensional hole parameters linked to their actual annotation so the tolerance and dimension display can be adjusted, or better yet, build in the tolerance options into the hole tool. I would also like to see the ability to attach GTOL frame
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.