Recently active
1. Describe the Problem When I edit a part (say put a fillet on a former sharp edge) switch to its drawing, and find that the dimension has lost its reference (to the now non-existent edge), I want to "reconnect" the dimension. This is done by right-clicking the dimension and choosing Edit Attachment- the icon with a set och chain links. However, almost 100% of the cases when I do that, the icon is missing. I have to unselect and try again, and sometimes again and again, before it appears. I wager it is related to the priority of how the dimension elements are selected. First click highlights it so it can be dragged. Second rather discerns between elements within the dimension. This is rather annoying though, because I have to peck like 4-5 times before I get to where I want to go, and if I happen to move the mouse a pixel between then I might have to try again. 2. Are you using a workaround?No.3. What is the use case for your organization?-4. What impact do
Hello, I have an assembly that includes various fastening elements such as bushings, bolts, etc. I would like to create a workshop drawing, just for the bushings. On one sheet, I want to have all the bushings that are in the assembly, with different views, and a table with the name and quantity of each bushing in the assembly, and of course, marked with a BOM. I am trying to do this, but I am having trouble linking the table to the assembly and individual parts. Is it even possible to do this? Thanks !
Cannot open native: SW2022*.sldprt, *.sldasm files in Creo9 - keeps showing error:'M059183C001.SLDPRT' cannot be opened because it was previously opened using newer release of Creo.'M047886C001.SLDASM' cannot be opened because it was previously opened using newer release of Creo. We were able to do this in the past with no issues We are using: Windchill 12.0.2.7, SW2022, Creo9, WWGM13.02.1 any ideas on what might have caused these files to not open now in Creo9?seems to be a Windchill issue? thanksRich
IFX in Creo 10.0.4.0When using IFX it standard creates holes in modifiable parts. When you don't want that you have to set it manually each time to "Do not create a hole".Is it possible to have it default always set to "Do not create a hole" for all parts?
I have a problem with the mouse in the mould base definition window, when I place the mouse over a plate it does not select to select it I have to move it either to the side or higher up,has anyone ever had this problem? if so how did you solve it?i have also tried with older versions but always the same problem.
1. Describe the ProblemIn creo parametric supported surface finish symbols does not have any prefix and suffix text. To enhance the information carried along with surface finish annotation we need to have prefix and suffix text to surface finish.2. Are you using a workaround?Yes. Currently we set this textual information as parameter to annotation.3. What is the use case for your organization?We want to store extra textual information of the surface finish annotation at its prefix and suffix location.4. What impact does this problem currently have on your organization?With the current workaround we loose the visual representation of this textual information. As it is possible in case of GTOL or other annotations in CREO.
I wanted to check if the following workflow is possible using Creo and Mathcad, and whether any customization is needed.Use Case:Let’s say I am designing a pressure vessel, where key parameters such as diameter, height, and thickness are determined through design calculations.Now, the thickness is calculated based on a formula in Mathcad, and I do not need to create a 3D model of the pressure vessel. Instead, my goal is to directly generate a 2D drawing in Creo, where dimensions like thickness, height, and diameter are taken from a linked Mathcad worksheet.My questions are:Is it possible to use output variables from a Mathcad sheet directly inside a Creo 2D drawing to control dimensions?Can this be done without creating a 3D model?Does this workflow require any customization or special setup?If it’s possible, could you please guide me on how to link Mathcad with a drawing and control the values dynamically?This workflow is quite relevant for many industries (especially pressure vessel
Hello all,I wanted to ask how you handle additional 2D symbols such as arrows, annotations and other image additions. I am thinking about creating a whole range of helpful 2D symbols. For example, all kinds of arrows and also a bin. I find that helpful sometimes. Of course, such things can be done later with another tool during further image processing, but we would like to do the complete image creation in CI if possible. My questions:1. how do you deal with this issue?2. is it possible to rotate inserted 2D symbols? This would be very helpful for arrows.3. is it possible to change the order of the inserted 2D symbols. The last 2D symbols inserted overlap the previous ones, and sometimes rearranging them would be helpful. Thanks and best regardsRamon
Hello Community Till date I am using Creo Parametric 6.0.6.0. but since last few days I am using Creo Parametric 11.0.3.0. I make model which have 2 machining operations in single model. I want to make individual drawing for both operation with machining symbol so I used family table and make two separate part for both operation. When I created drawing of both part and place machining symbol on machining surface. When I place machining symbol place on second machining operation face (in instance part drawing), obesely which surface not show in my generic model. So when I opened my generic model meanwhile second operation machining symbol failed in generic model. I attached images for reference. Please help me how to solve this problem. Thanks in advance.
I am in Creo Parametric 9.0.8.0. I am attempting to generate an MCD in Creo NC. I am able to generate an NCL file with no issues. However, when I try to generate an MCD file, after all of the prompts, I check my working directory and there is no file for the g-code output. I have attached an image of the log. Am I missing something here?
Hello.I'm using Creo Elements/Direct Modeling (x64 edition) Revision: 20.1.2.0, and every time I export a SLT file, I need to change the maximum deviation value. Is there a way to lock these values to create a default parameter?
Hi I am currently working on CREO 11, when calculating mass properties for any CAD file, the results always comes up as scientific notation (MASS = 6.0445521e+01 GRAM ).I tried looking and adjusting descimal dislplay in the configuration but it does not affect the mass calculation results.scientific notation results Is there a way to get the mass calculation as:MASS = 60.445 GRAMThanks
Why there is even wire create option ? I cannot follow a second wire along with the first created wire. !. CABLE does it much better and flexible. So what is the advantage/ Vs / when to use. between both?Thanks Advance! PL enlighten me with your thoughts.
I do not see a dedicated community for Cabling Corner. Can PTC add that? or where to look for if already there? Thanks!
How to use CREO software to create animated videos?Do you have any information to recommend?
Mesh export in fem mode Nastran with singular node is taking too long to export. Can someone suggest any tips to increase the export speed. meshing is quick but export to Nastran takes more time
1. Describe the Problem The ProDrawingDimensionVisit function is available in Toolkit.This can be used to collect all dimensions of a drawing whose names begin with "dd", "rdd" or "add". In other words, all dimensions created in the drawing while the config.pro option create_drawing_dims_only was set to yes. When creating a Toolkit app that uses this function, we've noticed with some older drawings or drawings that were copied from older ones that the Toolkit function sometimes finds many more dimensions than are actually on the drawing! 😲 The most extreme example we've found so far is a drawing that at first glance only contains one single dimension.Even with the Search Tool, only this one dimension can be found.With the ProDrawingDimensionVisit Toolkit function, however, a total of 157 dimensions can be found on the same drawing.The 156 additional dimensions are also not erased dimensions, which could be deleted with the user command delete_erased_dimensions in th
1. Describe the Problem When an annotation is shown on a model, then called out in a note (i.e. a customized hole note), the shown dimension is not erased, creating multiple instances of the same dimension. See attachment and notice how many times dimension IDs are used in a single view. In drawing mode, the shown dimension is erased when the dimension ID is called out in a note. 2. Are you using a workaround?The only workaround we are using is to manually erase the dimension. However, this does not prevent it from being shown again using "show annotations"3. What is the use case for your organization?All models using 3D annotations.4. What impact does this problem currently have on your organization?3D annotated models have the potential to be over-dimensioned, which can lead to parts being produced wrong.
1. Describe the ProblemFrom the Familly table:- Select the column where the corresponding objects are not highlighted.It is very hard to find the object in the Graphic Area when we have la large assembly. 2. Are you using a workaround?No workaround is available.3. What is the use case for your organization?Most of the users working with Design Table objects. it is hard to find the right object in the Creo Parametric Graphic area.4. What impact does this problem currently have on your organization?Identify the family table objects, in the Graphic Area, the user needs to put in a lot of effort. More than 300 users expect this option, in our organization.
Where did the Angle snapping setting go in Creo 10 for drawing lines at specified angles on drawings?I can't find it anywhere.
Hello everyone,I have a question, I want to build animation of Electromagnet in Creo 10. Like in this video:I build a model with a curve, which the electrons can go throughHow can I use the slot Connection and pattern here?I tried to make 2 Point on the electrons to have the similar distance of them, but it doesn´t work
Hello Community!We've had difficulties with cross-sections in a specific situation :We want to show section like hereunder to detail the hole profile : And this is the result we get :It seems to be related to the section plane position : I believe this is because there are counterbore surfaces on the same plane as section plane and Creo seems to absolutely hate this : In every community post I saw that were slightly similar to my case, the best working solution I saw was to set an offset for section plane. I tried here with a 0.01 mm offset and it works. Do you have any idea where it comes from? And is there any other resolution to this problem than cheating with an offset? Thank you in advance!
I was able to copy this activation key, which is valid for 72 hours, and paste it into the Manual Product Activation window to use it.The first time, I was able to use it for 72 hours without any problems. After 72 hours have passed, I want to use it again, so I do the same thing, but this time a window appears saying that is incorrect and I can't use it. No matter how many new activation keys I receive, each key is always incorrect and a window appears with the message "the key is not correct". Question:Is this 72 hour activation only once per account? ↓↓↓Confirmed↓↓↓"I create a new account, and i get another 72 hours for activation.But it seems so ridiculous to create a new account for every 72 hours activation..."
After working well since initial download on 7/30/23, Creo Modeling Express no longer starts. Instead a pop up dialogue prompting me for email and password to Activate comes up. After entering my e-address and password. and selecting 'Activate' I get a second dialogue saying: Connection failed. For Modeling Express to automatically activate it requires access to the internet. Please check if a proxy has to be specified and enter your company's proxy server details so that activation can proceed. I'm merely an individual with a laptop, there is no proxy server. My internet connection is fine and I have a basic PTC account. How can I fix this and why did it happen?
My company is wanting to start modeling wiring harnesses in 3D. My plan was to add the connectors into the CAD model with an axis at each point where a pin would be. My current problem is I don't know what to do about the terminals and the locking mechanisms for the terminals (like the small plastic piece you shove in a Deutsch connector so the pins don't come out). I would really rather not add the terminals and locks into CAD just because there just such tiny pieces. We have part numbers for each lock and terminal, would it be possible to somehow add that information to the connectors Creo file? So once the 2D drawing is made is can pull in and show the connector the terminal and the lock when you make one of those tables? Thanks in advance
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.