Recently active
When creating a flushed hem flange, obround, rectangular, and stretch bend reliefs are not available. The tab is active like they should be, but an info message is provided that only rip reliefs will be created. Add the capability of using these bend reliefs with flushed flanges.
The old "Turbo Pattern" process of creating a surface, solidifying it, then patterning that has been consolidated into what is now called "Geometry Patterns". Unfortunately this is only available in solid modeling, not the sheet metal module. The fact is that sheet metal perforation for EMI and airflow for thermals is a common design in many fields.The fact that you can't create vent holes in sheet metal with the geometry pattern process is a huge miss. It also shows the inconsistency within Creo between modules. Please enable the ability to create geometry patterns in sheet metal parts similar to how it is done in solid mode.
Current method uses the right-hand rule to mirror a part and can flip the part in ways that are not intended. Basically the part has to be designed in a certain orientation to mirror correctly. It is based on the original Csys for the part. Suggestion is to allow picking a different Csys to use for mirroring to correctly mirror the part as intended.
Sometimes when we make a replace feature, or a edit reference, the final result isn't the desired one, due different directions, in the new features or references. This leads to the need of edit the features.So my idea is to have in the edit reference, replace feature feature, past feature... Having the option of change direction. See the next example. https://grabcad.com/tutorials/how-to-do-the-replace-command-in-catia-v5https://grabcad.com/tutorials/how-to-do-the-replace-command-in-catia-v5
You can currently assign different materials to different instances, red_6_12_nylon and yellow_6_12_nylon, but as soon as you bring in a second instance, the are all the latest color added. The suggested copying all solid surfaces work around is not acceptable for many models. This was requested in 2014 and still not fixed.
When deleting the base line for ordinate dimensions, a message will appear (see picture below) saying that the dependent dimensions will be deleted as well. On some drawings there are several such baselines, on one axis. Now I can not find which dimensions are affected, which are dependent and which are deleted? (no dimensions are highlighted) I'm sure I'm not the only one in the world who would.It just gets stupid when measurements are shifted to other sheets. If a measurement is accidentally deleted it can have fatal consequences for the part quality. Up to the failure of transmissions, axles, engines, steering systems, airplanes.... Please show the dependent dimensions, from the base line of an ordinate dimension
For Creo integrated with Windchill, one of the ultimate goals is to take parts lists off the drawing. There is some support to accomplish this passing find numbers over, but much of the setup is manual. This should be better integrated through some of the following functions. This can help support the path to MBD as well. Automatic Find Numbers without drawing tables 3D BOM Balloons/callouts for MBD views Improve integration of Find Number to Product Structure (it can be done, but can be better) Better passing of material information to WIndchill Ultimately product view with better usage of product structure, and linkages to models (integrated 3D model and design presentation in one pvz)
We are implementing bulk items to enable a better workflow with our new WindChill PLM system we are implementing. We found that we cannot see the units for parameters that display during the user-input field. How does the engineer know what value to enter if the engineer can't see the units? The engineer brings in a library part for paint and adds it to his assembly. It prompts to enter in the value without showing the units! He would be clueless! The only way for him to see the units is to put in some random value and then go into the component level parameters for the bulk items to view the units and enter a more accurate number. The units should definitely be displayed. It would also be nice to show the parameter description, if the librarian needs to give some sort of instructions. Furthermore, the unit value should be editable. Let's say I am adding paint to a screw. I would want a smaller unit then if I added paint to a car! Please help with at least the unit display. If we can g
In Creo 6, PTC made significant improvements to the Creo Model Tree - one of those features was adding a Windchill column if Creo is connected to Windchill. This is really helpful for users. However, please also include the 'Change Status' and 'Compare Status' in the Windchill column for even more helpful information for users. Compare Status - help users identify name conflicts with objects in Windchill. Change Status - Helpful to know if any object has a Problem Report, Change Request, or Change Notice. Please include an easy way to navigate to the related change information.
There are units within WindChill that can be specified for a BOM that Creo does not have. For instance, when working with WTParts in WindChill, you can specify to use a certain number of 'drops' of glue. However, in Creo there are no 'drops' in the units drop-down for a parameter value. If we would like to make this as smart as possible, we would like the units to match up with WindChill. Thanks!
Referencing Article: CS275505 - Are Appearance States Accessible via Toolkit At present (Nov. 13 2019), this functionality is not present in Creo Toolkit. Our intent is to export combined state data to a CSV file, then import these settings into other Creo files, so we can apply the same combined states to other models. At a minimum, the request is for: ProAppearancestatesGet() The article also requests additional functionality: ProSolidAppearancestatesGet() -> Collect all AS of a solid ProAppearancestateNameGet() -> Get name of an AS ProAppearancestateNameSet() -> Set name of an AS ProAppearancestateActivate() -> Activate AS (there is an UI button for that in the view manager dialog) ProAppearancestateActiveGet() -> Evaluate the active AS ProAppearancestateActivestateUpdate() -> updates the AS, which is active in the specified model. If the appearances of the surfaces have changed, then calling this function ensures that the active AS
Regarding GOST 2.307-2011 "Unified system of design documentation. Drawing of dimensions and limit deviations"http://docs.cntd.ru/document/1200086238<https://nam04.safelinks.protection.outlook.com/?url=http%...4.3 reference dimensions are indicated by the sign "*", and in the technical requirements write: "* Dimensions for reference". If all dimensions are reference, do not mark the asterisk "*", and in the technical requirements write:"dimensions for reference". In Russian localization for Creo Parametric all references dimension display text "ПРИВЯЗКА" instead "REF" in English version. So, no need extra effort and change a logic of a software to meet russian standards. Need to change localization text "ПРИВЯЗКА" to "*".
With regard to the Sequence Clearance “Start and END Point” I would like to have access to the: table repeat region Report Symbol, the “Machine Tool Setup PPRINT” and/or the “Parameter UI” option. The justification for this manufacturing request is safety and NC Program accountability. Certain (Mazak) 5-axis machine tools utilize Tool Center Point Control (TCP) (G43.4) to translate the tool-tip path defined in the part program into the position and orientations for the machine’s linear and rotary axes. Within particular zones of the rotary axis the tool pivot motions will translate without issue but other (particular 180 degree) translations of the tool vector will whip the tool into the machine or the part. A simple solution to insure a controlled rotation is to start and end each Sequence at a common (safe) rotary centerline. I typically name this point “PT_43-4_ROT.” I would like to have this Start and End point flagged as a double check in the O
I would like to see an option to zoom the model to 100%, actual size, on the screen. This would make it much easier to grasp the physical size of a model. I have seen many instances when a small detail is perceived as much larger than reality do to the zoom of the model and large details perceived as small also.
For Exporting from Creo (Save As) to DWG format, you can currently ONLY export 3D files as tessellated/triangulated even though DWG supports full 3D surfaces. Our users currently have to open the 3D models in Inventor to properly export. Please add support for exporting full 3D surfaces to DWG format and an option to have surfaces be the default export type for DWGs.
Enhancement Suggestion: With providing basic dimensions like for Block using Height,width and length, Software should create the model. We can draw the direct Block, Sphere, Cylinder, Cone options to create a new model without using sketch option.
When we have something selected, and if we want to unselect those objects, we nee to click on the background. For click on the background, and while working with big or complex models, we need to rotate, pan or zoom the view, for having some background to click it. It's some mouse clicks and movments not needed. My suggestion is to unselect objects by pressing the esc key, or by making the repaint.
In my opinion, the coordinate system, should have the planes inside it. CATIA and NX has the same approach and it's really useffull. Or at least, every time we inserted a coordinate system, could have the 3 planes, grouped inside coordinate system (planeXY, PlaneXZ, PlaneYZ).
A very useful feature that CREO should have, is extreme points for quilts and bodies.See the example from catiahttps://youtu.be/Zq253f1M7nE
Add the ability to change/show parameters units easily on Creo drawings without having to create additional parameters. Current functionality only allows changing parameter decimal place display - &volume[.1] = 25000000.0 Please add the ability to change/display parameter units without having to create additional parameters. &volume[.1][mm^3][display_unit] = 25000000.0 mm^3 or mm3 &volume[.1][cm^3][display_unit] = 25000.0 cm^3 or cm3 &volume[.1][cm^3] = 25000.0 Use case example: It's very common for to model in one unit system but to want to display some parameter differently on a drawing. Specific example - 3d model in mm-kg-s in Creo but this makes the volume parameter in mm^3 which create a huge number that is difficult to read on a drawing. Displaying in cm^3 makes more the information easier to read. The current functionality to show units on drawings requires several extra parameters, is difficult to setup, and doesn't display the u
Hello Creo gurus After some time spent on Swx and Inventor, I came back to my loved Creo. After a while, I realize that some features are really useful and avoid a lot of time-consuming operations One of these is the function to automatically select the axis on a cylindrical or conical surface, avoiding the need to really create the AXIS as a reference feature as we need to do (try to imagine in the case of imported geometry). Would not be nice if scrolling in the Query Select, in the case of Cylinder or Conical Surface there was an Axis? BR D.
Have the ability to add check surfaces to all tool paths to eliminate tool holder crash's. This tool path was Roughing using a window..
Have a simple check box attached to the tool that would not allow the drill, drill past the flute length.
The DEX is a great way of creating and managing concepts. But currently it is only usable for visual concepts because it is not possible to run a simulation analysis on a checkpoint. It would be great if this where possible because then the concepts can not only be made visual but also be checked on strength. For now the DEX is unusable for us because the simulation cannot be executed so we have to fall back on the old way of working and that is creating copies and change them.
In Creo Parametric / Options Modeller it should be possible to search for a specific variant spezification. We have a lot new of variant spezifications every day in Windchill. The Creo User has to create a CAD variant out of them and needs a serach functionality to find the needed variant spezification.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.