Recently active
1. Describe the ProblemIn Creo+, license availability can only be checked by an administrator through the Creo+ portal. There is no way for general users to check whether a floating option is available or to see who is currently using the license (unlike PTCSTATUS.bat for traditional Creo licenses).2. Are you using a workaround?The only current workaround is to ask an administrator to log into the Creo+ portal and check who is using the license as the administrator.3. What is the use case for your organization?Users can start Creo+ with a floating option and then walk away from their machine. There is no way for other users to see who is consuming the license to contact them and request that they release it if possible.4. What impact does this problem currently have on your organization?Users must rely on an administrator to check license status. This creates delays and inefficiencies, especially since some users are located in different time zones around the world.
Hello, We have one assembly drawing, and it has 4 components in part table. These 4 components are having multiple part numbers (Likewise family table A123Z_G (generic) A123Z01, A123Z02....A123Z150) Also it has variants like Different pipe size (0.5", 1", 1.5", 2" etc) Different weld type (like fillet, v-groove type, bevel etc.) material (Mild Steel, Stainless steel, Aluminum, Bronze etc.) By considering of these much of parameters and some more, we need to create one master data table in creo drawing which will be working by drop down option and the final output part table should be viewed on main drawing sheet basis on selection of drop down filters. This is just like a complex excel sheet which has master data, drop down filters and one output tab which shows the exact result based on drop down selection. Do we incorporate the master tables, Drop down tables and Output tables in Creo drawing?
How to bring .xls table in Creo10? Is there a simple way to do so. I have a big BOM i am working on and ita a pain to copy paste: ) Thx in Adv! Creo on Fly!!
I am using Creo Parametric Release 12.4 and Datecode12.4.0.0I would like to create a new oriented view with an isometric orientation.Currently, the default Isometric view has the Y‑axis along the upper side.I want to rotate it so that the Z‑axis is along the upper side instead
Greetings, Not sure if this is a Windcill or CAD file or network issue. Has anyone ever had issues opening files in Windchill but another person does not? I have cleared cache, cleared workspace, reset Windchill and still not able to open. One thing to note: We work on different networks that I guess tap into a shared Windchill. This may have something to do with it? I have seen problems with syncing checked in/checked out files. If so, what fixes the problem? Wayne
I am using Creo Parametric Release 12.4 and Datecode12.4.2.0Good morning, when uploading the new releas and the new license file, I get an "inappropriate" error. I should point out that I also downloaded the latest license file.
1. Describe the ProblemTo develop Automated process for existing Creepage and Clearance tool using xml file creo schematic.Existing Creepage and clearance Tool is time consuming process.It includes lots of manual work, Component definition is manualLots of issues facing when working with big assemblies and complicated modelsFatal errorLots of gaps/ More chances of human errorsAccuracy is low.Analysis time is More.Independent process from system/No linkage with application/user 2. Are you using a workaround?yes we are using this for our E-mobility products.3. What is the use case for your organization?Propose to use a novel approach in existing tool which include the below features: 1. Proposing Automated process with help of Creo schematic input in .xml format to be import in Creepage and Clearance tool 2. 70-80% information can be auto populate and component having high voltage is automatically selected in improved tool 3. Accuracy of analysis is increased with automated flow wit
I created a script as shown in the image and saved it as a .lst file. I also referenced the same file in config.pro. However, when I create a new parameter in Creo, the dropdown list does not appear.Please help me resolve this issue. Note - I also tried with .txt file instead of .lstCreo Version - 11.0.5.0
how do you modify imported Kennametal boring bars to work in the simulation section in creo manufacturing. i dont know where to start on how to get tool to work
At sketcher, arcs which are (tangentially) connected to surrounding lines and arcs there is two (mathematical) solutions for resulting geometry. Currently users have to push in some effort to guarantee the desired result for highly prarametrized models. Product Idea Provide additional sketcher constrain, which will guarantee the (shorter/longer) arc during any dimensional change. Flipping Arc
When saving a step file, if you type in the new name first (image 1), then select step file (image 2), the file name switches back model_name (image 3). Then you have to go back and select the file (image 4) and retype the name you want the step file to be named in the first place (image 5). Please correct so that the file name you type in for new name stays the same if you type it in and then change file types. ***Added 12-JUL-2013***This same is also true when you are creating pdf files, too.Thanks, Dale***Added 18-MAR-2014***Also true for creating .stl files.Thanks, Dale
Hello,I use Inspect geometry/Shadow analysis. But now I need to create an envelope of the shadow when the light direction change. Is there any way how to do it or get the envelope geometry? I know I can dynamically update the shadow when I drag light dimension, but I need to change concurrently 2 or 3 dimensions. I use Creo 12 Thanks for help.Best regardsMichal
This problem has really been frustrating me for quite some time...When I create a drawing and insert a view then select the display style to be "no hidden" it usually hides all the hidden lines no problem.But when I enable a section view that is when a whole world of problems occurs.Certain objects don't seem to obey the hidden lines, and they still show all their lines. Specifically it seems to be quilts or something that is having this problem because it only the objects in pink/purple lines that have the problem. I just find it so strange that this only happens with section views.Anyway, I tried editing the section itself by checking off the "Include quilts" option, but that just removed the components entirely rather than just removing the hidden lines.Someone please help me figure out what is going on here.I've attached a photo of the problem. It shows my layout with the section view enabled. you'll notice there are cabinets that are pink which are showing all their internal compo
Hello, I am trying to model a retracting pin which allows a spring loaded mass to drop freely in the z-axis using Creo 8+. However, I keep getting the following error: "3-D contact in model has encountered an error:In a cylinder-cylinder contact, the rectangular contact patch is invalid.This violates contact-patch assumptions related to Hertzian compliant contactcalculations." As far as I can tell, there is no interference in my model, no erroneous material properties, etc. I have been using dynamic analysis for this, and the pin is removed using a translation servo motor. The mass is constrained in the x & y by two pin constraints. I do not have friction enabled, nor gravity. Any help you could give would be greatly appreciated! I have already tried changing the contact to a point-cylinder & decreasing the contact radius of the point.
Community, I have imported a complex model that is made up entirely of quilts, and of course, quilts have edges. After importing the model into Creo 6 and selecting the No Hidden icon, all the lines still show through like a wireframe display. I cannot display the model online, but no matter what combination of system colors I try, they always show through, even with Black on White. There is nothing in the layer tree to turn off, it's all quilts. Has anyone encountered this before, and is there a solution? Thanks in advance.
Hello, I'm not really sure how to label this one, but let me try and elaborate: Has anyone else experienced it where there is a delay/lag spike when trying to left click (select) anything in the graphics windows on Creo 11? Calling it a delay probably isn't correct, but Creo 11 (both versions 11.0.0.0 and 11.0.1.0) just seems to "miss" some of my mouse inputs. It happens randomly when I'm either trying to add a dimension in a 3D sketch; CTRL select edges or surfaces of a 3D model; and also when trying to move balloons in drawings? Essentially left click/selecting anything on a daily basis will just randomly not respond and I have to click again. I always thought it was just me miss clicking but I'm noticing it more and more, and its not limited to a specific model.I have compared it to Creo 10 and it seems to be primarily in 11. I have tried:- Default PTC config- Different mouse- Multiple models
Hi Forum, I have an *.asm assembly in Creo View 6.0, displayed in HLR mode as black and white line drawing. When exporting that view to PDF ("Save Current View as 2D Vector File" -> PDF), most of the lines are missing in the resulting PDF. If I export a single *.prt part from that *.asm assembly to PDF the same way, all lines are shown perfectly. Thanks for help on how to export also the *.asm assembly with all lines visible in the resulting PDF.
Hi Guys, Im trying to make a mapkey that makes a new file...with the same name that is currently up on the screen just with a -MFG at the end. Example. Current file on screen. called N12345-1234.prtI want to make a mapkey that will create a NEW part file. Called N12345-1234-MFG.prt. (or what ever the original part name is on the screen with a -MFG added to it) Is there any place i can copy the current name from? I tried in a few areas, with a copy / paste but the mapkey just copies the text..so the files are always called the same thing. (No good) They all come out as N12345-1234-mfg.prt no matter what the original file is called. Is there a way to use parameters when naming a file? Or anyone know of any other way to grab the current file name? Thanks,Jay
I am using Creo Live SimulateI've designed a spring and as a stand alone part has a stiffness of 56N/mm according to Creo Live Simulation. I have created an assembly with 2 of these springs in parallel on a mass of 8.4kg. I expect to get a natural frequency of about 18.4Hz, but creo simulate live is giving me a result of about 173Hz. It appears to be looking at higher order resonant frequencies and not seeing the 1st mode natural frequency.I'm wondering if this has something to do with the contacts (bonded) between parts in the assembly? What is the significance of the tolerance value in this context?I'm starting to lose confidence in the reliability of the software.
As usual, PTC makes it as difficult as possible to find them. Nice, way to go. A simple search should find it, especially in the "Support" (LOL, as IF) section. Anyone know where to find that PDF? Thx. Edit: I FINALLY found it. Total PITA to find.
I have a small class project. A number of students have bright blue lines shown on parts, but I do not. We're all in Creo +. The lines don't appear in the part view, just the assembly. They aren't visible sketches, and I've tried hiding all the different layers and I can't make them go away. What am I missing?
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 11.12. What is the problem?It is not possible to round parameters value used into the bom balloon (it is possible in drawing by using expression [.n] )3. Are you using a workaround? If yes, please describe it.Yes, i do not use parameters and I type values manually4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.i want to show only some digits of a real type parameter5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)If a parameter changes, i can forget to update the value I inserted manually in my figure
1. Describe the ProblemDescription of Current Behavior: Currently, while Creo Parametric works according to the existing product specifications, there is a significant gap in our ECAD-MCAD collaboration. Our entire ECAD collaboration process relies on the IDX format to track and exchange all design changes. However, while copper information—specifically vias, copper pads, planes, and conductors (traces)—is fully supported on the ECAD side, it is not supported or imported into Creo Parametric within IDX. Currently, Creo Parametric only allows copper information to be brought through a separately generated *.eda file.Proposed Enhancement (Solution): We request an enhancement to the IDX interface within Creo Parametric to fully support the native import and representation of copper information (vias, pads, planes, and conductors) directly through the IDX format. Because all our design changes are exchanged via IDX, it is absolutely essential that conductors can also be exchanged through t
1. Describe the ProblemIn Copy Geometry feature I can use the Update Control RMB action to set up the dependency of the feature itself (see pic.) In a Shrinkwrap feature this menu is not available (see pic.) As a result, selecting multiple Copy Geometry and External Copy Geometry features allows you to set the update control simultaneously. This capability is not available for Shrinkwrap or Merge/Inheritance features. 2. Are you using a workaround?Edit the definition of each feature (sometimes dozens of features) and set the desired behavior.3. What is the use case for your organization?In certain situations, it would be useful to select all data-sharing features at once (e.g., using the search tool) and set the same update behavior for all of them. This operation is possible in some other CAD systems. Currently, you can select all data-sharing features, but you cannot set the Update Control for those that do not provide the RMB option (e.g., Shrinkwrap).4. W
1. Describe the ProblemHello, To design plastic injection part, we need to different feature to analysis and help to design plastic parts with the injection technology requirements.In CREO Molding injection module, we needWrapage of geometryaccording to different scenarios depending of Injection gate position, material and geometry. Variation of thickness Thin area in metal mold parts Counter draft detection Molding direction Minimum radius/sharp edge We didn't find this function in CREO Molding Injection Suite. Thanks2. Are you using a workaround?We have been obliged to use the Fusion360 Simulation Extension to do this.3. What is the use case for your organization?This tools are needed to right design injected plastic part and save time to give 3D model to supplier with only few thing to adjust with him.4. What impact does this problem currently have on your organization?We need to use 2 CAD softwares : CREO to design and Fusion360 t
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.