Recently active
I often have the situation where I need the same settings for a hole (diameter, counterbore) and use them for another hole in the same part. I have seen that in creo there is the option to copy and paste construction elements such as holes, profiles etc., so is there maybe an option to copy and paste the settings for a hole that I already used, or do you have to set up diameter, depth, counterbore etc. each time that you are creating a new hole?
to allow box selection at all scenarios and for everything (including right to leftand left to right).
Hello All, I have been using Creo 10 for about a year now with a SpaceMouse Enterprise. Recently, when I have an assembly open (doesn't happen in individual part files), I get the regular red "diamond" that shows me the spin center when moving the model with the SM, but I also get an additional red "dot" now that I have not seen before. Additionally, when I let go of the SM to stop moving the model, it then shifts in a random direction, sometimes up to 1/5 of the screen, away from where I moved it to.... I think that second red dot is linked to the weird shift as I had not had the shifting issue before this dot appeared. How do I make it go away? Updates: - The red dot only appears when rotating with SM. When rotating with MMB, I get no red dot, but the model shift is still there. It is actually more severe when using MMB, causing the model to shift out of frame.- Closing the model, and re-opening seems to have "f
I am trying to use the fill pattern feature in Creo Parametric 8.0. I am simply trying to create some small 3.0mm holes for vents for an electrical cover box. I have performed the following steps:I have created a rectangular sketch (used for the Fill Region/Grid) created a hole using the extrude feature that is positioned on the same surface within the bounding boxI have tried constraining to the center of rectangular sketch in "bullet point 1", but this doesn't make any difference in my end result I get a preview showing the features that will get patterned I click "OK" and the features are created very far out of the bounding box I created in "bullet point 1"I have tried creating the sketch within the pattern feature as well, with no luck Every time I try this, using other shapes (hexagon's, squares, etc) as the feature shape, I never get the pattern actually made within the boundary box that Creo Parametric allows you to define. Any idea what is happen
I want to make an extrude to remove material for a relatively simple assembly. However, I found that the extrude doesn't work for smaller distance say 3 inches or to the reference plane I made a little bit from the end of the track. The extrude doesn't work when I say through all or to the plane further down around the bend of the track.
I have a network drive where CREO is configured, when I try to open it, it gives me an error that it can't save or open, the folder is allowed to save, delete, and create.
I have a family table ( variaing dimensions are length and its tolerance)Inst. Len. Tol.a 10 0.5b 20 0.6 I used repeat region and filtered it to show like this Inst. Len.a 10b 20 I want to show dimensions with its tolerance using repeat region in drawing.Inst. Len.a 10±0.5b 20±0.6 Please suggest how to show tol
I thought I could use any connected surface as a draft hinge in previous versions of CREO (2.0 - 4.0). I am currently using 11.0 and tried to use a curved surface as a draft hinge and it could not be selected. Am I mis-remembering or is this possible? Model above is representative only. Yellow is the surfaces to be drafted and green is the surface I wish to use as a draft hinge.
I am using Creo Parametric Release N/A and DatecodeN/Aif I do "flip material removal side" after make section and arrowsthe lines are gone..
Hello All, For example, ability to cut a part of a case (see black line) best wishes, Gabi
1) I have had a problem where the parts and sometimes assemblies get visually "corrupted". If it happens in parts it is still doable to work around it If I ignore it, as only the visual image gets distorted but I can still work with the part as normal (I can rotate, extrude, and everything normally). Things get tricky when a whole assembly starts to act this way, and I cant really ignore it. I suspect that is occurs the most when I open a part from the assembly and start working with it, but I am not very sure why. I am not very knowledgeable of computers but these are my laptop specifications: processor: 11th Gen Intel(R) Core(TM) i5-1135G7 2.40GHz 2.42 GHz RAM: 16.0 GB Graphics: Intel(R) Iris(R) Xe GraphicsCreo: Creo Parametric ver9 2)Another college of mine has a problem where Creo straight up just crashes and closes when it becomes a little heavy. The most we do is drawings and assemblies and it crashes for him. We rarely do simulations. We suspect t
The latest Creo+ release includes over 85 enhancements to bring you all the benefits of Creo, delivered via SaaS, improving everyday design productivity. Industry-leading composite capabilities generate solid geometry from composite layers, and expanded Model-Based Definition (MBD) ensures accurate information is provided every time with improved file export capabilities. AI-powered generative design can be leveraged for thermal optimization studies, and manufacturing design now has enhanced lattice connection and undercut milling capabilities. User-inspired enhancements, such as feature presets and flat assemblies, are now incorporated to deliver your best designs faster. Updating to the latest build of Creo+ is now over 75% faster, and real-time collaboration sessions now have easier communication. Get all the benefits of Creo delivered via SaaS with Creo+, and gain access to cloud-based tools to enhance collaboration, improve accessibility, and simplify license management.
I have a mass system that I am designing isolators for. I'm attempting to create a new coordinate system that represents the principal axes so that I can use that to identify locations and angles for the isolators. My problem is that when I compute the principal axes, then create a new coordinate system at the location and orientation of the reported principal axes, the location is correct but the rotation is slightly askew and I can't figure out why. In the picture below, I would expect my 1, 2, 3 axes and X, Y, Z to be on top of each other. I uploaded the CAD files as well.
1. Describe the Problem Reference Ticket: C17501015 SPR: 15787581 We have had issues in the past when a step model from another tool has color information assigned to both sides of a surface. After Creo imports the model, managing colors is very difficult as Creo assumes color functionality is to the outside surface only. We then either can't remove the old colors from the model colors or it removes other colors we already assigned. One idea to solve this issue is: To give users more control over color assignment during import by introducing an import profile option that allows users to choose how colors are applied. By default, colors will be assigned as specified in the STEP file. However, users will have the flexibility to select an alternative behavior, applying colors to the outside only for solids. This addition aims to support diverse workflows while keeping the default behavior unchanged for consistency. 2. Are you using a workaround?We end up redo
Hello Everyone, I am having a hard time trying to calculate the roll angle for a involute curve. I can draw it as shown in the image but unable to calculate it. I've been working with the involute roll angle formula but i have not been able to make match what you see below in the picture.Any help world be great,And thank you in advance.Sean
How can AFX (framework) use predefined parameters for the automatic component drawing function?
Hello forum members,I am using Creo Parametric 10.0.7.0 together with Creoson and Python to create a (more or less) fluid animation. In the files you can look at my code.My problem here is that whenever the value for the parameter is set and the regeneration is done the view changes so that the assembly is centered in the middle. Does anyone know how to do something against that?I'm grateful for every bit of help, thank you. Kind regards
HiIs there any option that we can include the Part description in Global Interference window so that while downloading the file, it will be easy for me to filter?
As a company, in 2022 we downloaded Creo Illustrate 8.0. I have just started using it and am stuck on this issue. Currently, when we go into Windchill (version 11, soon will be going to version 12) we access an .asm file and convert it to a .pvz file and then use that in Creo Illustrate to make images for use in end-user manuals. Our understanding is that when a pvz is created it “breaks the link” between the active version in Windchill and what’s being used in Creo Illustrate. So, if our current model is Revision A and we have created 20 different figure views and then changes are made several times and we are now using Revision C, this means the file information in Creo is outdated, correct? How, if at all possible, can we automatically update the files in Creo Illustrate to Rev C without having to redo all 20 images? Is this can be done, how do we do it? If this is not available in Creo Illustrate 8.0, is it available in a more current version?The pers
Hi to all,I have recently update my PTC product from Wildfire 5 to CREO 2. Until I have used Wildfire 5 I could import XML cabling file in Pro/E (from Zuken E3) with no problem. In Creo 2.0 when I try to import same file I receive an error about spools. In practice, CREO does not accept the separation character (ex. 0.5) of the spools. Infact if I modify manualy the XML file and change 0.5 in 0_5 the problem is solved. So my questions are:- how do I replace automatically "_" instead of "."? - why in NWF file, the same spools with "0.5" is properly interpreted by CREO with no error?Thanx
Password Reset and New User Account Emails are not being sent to the users from the server. The "Send Test E-mail" button on the Enter E-mail Configuration window successfully sends emails to specified users but when resetting passwords and adding new users no emails are sent to users stored emails.The XML file has all the correct lines referenced in CASE: CS69595.
I use Creo elements/directs drafting Mixed UI 20.7 But in one day I drew a rectangle result in a parallelogram automatically. Who are know the tips to fix this case?
Does PTC offer perpetual license for Creo Parametric 11.0 or 12.0?
So if I create a threaded hole feature I can see the hole callout on screen giving me the details of the that hole feature.BUTIf I create a counter-bored hole feature I get no hole call out.Why is this? If this is a setting that needs to be adjusted why is it not uniform by default?
1. Describe the ProblemFlow Analysis のドキュメントやチュートリアルで、ファンやプロペラなど、回転系の物が回転して液体や気体の流れを解析するものを作成して下さい。2. Are you using a workaround?サポートセンターなどから類似の動画を送って頂きましたが、説明がないので非常に分かりにくいです。3. What is the use case for your organization?ある容器の中に液体が入っており、そこにプロペラ(ファン)が回転して液体の速度が同じになうようなプロペラ(ファン)の位置や形状を解析するなど4. What impact does this problem currently have on your organization?回転系の解析が出来ずに試作品を作成するコストや時間が発生している。
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.