Recently active
I am using Creo Parametric Release 8.0 and Datecode8.0.12.0When i import the STP model in creo 8 , a receipt a surface instead of 3D model . When i try the same thing with fusion 360 and spaceclaim i receipt a 3D file .I think that it's due to a adjustment in creo . need helpHere are the errors that I facedno error
Hello community, I've been researching the possibility to plug in the output from Creo Mold Simulation (Warpage & Fiber Orientation) into Creo Simulate. It seems PTC hasn't created that capability and they seem to be suspiciously silent about it, either due to the complexity to implement it or lack of knowledge on how powerful this could be for our design and analysis, as they seem to have everything on hand to add this feature. If someone knows a solution or workaround to use CMA and Simulate together let me know. Thanks!,JD
In a Creo Illustrate Figure, is it possible to have a section view only displayed in the inset? I do not want the section view on the main parent model in the figure view, only the section view.
Can someone help me create a program for exporting parameters to an Excel table using CREO SON? After that, I would like to modify the parameters and import them back."If you need help with specific steps or code related to this task, feel free to provide more details!
Hello everybody I just installed Creo 9.0 on my computer. The installation didn't end well since I have a message saying the installation of virtual c++ redistribuables failed.I could not find the reason why.So I installed directly the visual ++ package, from Microsoft site, and it wen't well.But as I try to launch Creo 9 parametrics 9.0.0.0, with the shortcut that appeared on my desktop, the hourglass briefly changes and return to its normal aspect, and nothing happens : Creo won't start.Could anyone tell me if you see any solution, or even a log file to look into to understand what happens ?Many thanks in advance for your help.
My company is starting to use the wiring side of Creo and to stream line things in the future is it possible to make a template for the harness drawings? I'd like to have the bottom right corner to look similar to how a solid part drawing would look and have tables ready to put the BOM. Is this something that is possible or worth it to save time?
The CAD data is saved on shared drive. When we open the drawings and click on Table Menu, it shows the spinning logo initially and creo goes in not responding mode for around 20-30 min. I am using the Creo 2 M120. I have tested this issue with M070 and it shows the same behavior. This happens on Dell and HP hardware. Any idea or suggestion will be helpful. Thanks in Advance.
I am using CREO 10.0.7.0 and on the drawing sheet. I have to edit a bom table .tbl file to modify the template to my needs.I want to move a column or copy and paste the contents to a new column created at the desired position. I also want to edit the column width to match text size automatically.How can I do this task?
Dear Community,I am currently working with Import Data Doctor (IDD) in Creo Parametric to repair STEP, IGES, and other imported files. However, I am facing issues where the surfaces get stretched, deformed, or the topology changes after the repair process.Could anyone guide me on best practices or techniques to avoid these issues and ensure a clean repair? Any suggestions, workflows, or settings that have worked for you would be greatly appreciated.Looking forward to your insights.
Dear all Does anyone have experience about customize Creo Elements/Direct license server interface ?Customers want to Creo Elements/Direct license server interface show name of user account (same as user Windows log-in name) in Clients tab when client PC using Creo Elements/Direct Modeling (Default show Computer name and ID )You can see as attached file.Kindly guide me how to do . Thank you James
Currently on Creo 10, but I think the question applies to many versions. I want to Creo to execute a script file near the beginning of the mapkey. I can make it work at the end. (The case below is just an example,) I can make it work at the end.mapkey w1 @MAPKEY_NAMEChange display to creo Colors;\mapkey(continued) @MAPKEY_LABELChange to Creo Colors;~ Select `main_dlg_cur` `appl_casc`;\mapkey(continued) ~ Close `main_dlg_cur` `appl_casc`;~ Command `ProCmdRibbonOptionsDlg` ;\mapkey(continued) ~ Select `ribbon_options_dialog` `PageSwitcherPageList` 1 `colors_layouts`;\mapkey(continued) ~ Open `ribbon_options_dialog` `colors_layouts.Color_scheme_optMenu`;\mapkey(continued) ~ Close `ribbon_options_dialog` `colors_layouts.Color_scheme_optMenu`;\mapkey(continued) ~ Select `ribbon_options_dialog` `colors_layouts.Color_scheme_optMenu` 1 `1`;\mapkey(continued) ~ Activate `ribbon_options_dialog` `OkPshBtn`;\mapkey(continued) @SYSTEMC:\\TEMP\\test.bat; But I would like t
How can you propagate layer status of a subassembly into a parent assembly. In other words, when a certain display selection for layers is made in the subassembly, I want the layer display to appear the same way when this subassembly is assembled in its parent assembly. Even with the "propagate status" checked in the layer tool menu, this is not working as expected. It used to work fine in Creo 4, I'm currently using Creo 8.
Hi,I have come with an issue that when I start the protoolkit.dat fie the following error has been shown. I am newbie to this toolkit process and I am learning that think right. Can any one help me with that issue. What mistake I have done?Thank you
I've created several mapkeys lately so I thought I'd share some general tips I learned to write it down for next time. Please share your own tips below to expand the collection. This was done on Creo 3 M060 but the ideas should hopefully be not specific to that.Mapkey Writing/Editing TipsGeneral Tips:Mapkeys often break when upgrading between Creo Versions (Creo 3 vs Creo 1) but they can save you a lot of time in the year or two between versions.Open the mapkey menu by searching for Mapkeys in the upper right. Also, if someone knows how find the Mapkey menu behind when its behind other Creo Windows, please share. Record commands from the RMB or the Quick Access Toolbar to eliminate extra Mapkey lines that just moves around Creo for no reason. Most commands can be launched without being on a specific interface tab.Mapkeys skip any commands they cannot execute. This lets users add in some logic to close menus that sometime popup or d
Hello,I have defined transparent model and it looks OK but when trying to render it then transparency is ignored.Any idea why Creo 10 doesnt support it?
Is there anyway the model full of open surfaces can generate normal drawings like solid models?I am just throwing this out in here as a bait if some one came up with some smart way to do it!! 🙂THANKS IN ADVANCE!See Image of what I am dealing with.
Good points in topic. I like the one setting it to read only. Any tips on how best to do it?
During Assembly when I pick surface -Surface it should be Coincident automatically not Normal. PTC needs to fix this OR let me know the benefit. This is very inconvenient additional multiple clicks which are not needed.
Hi allI working on drawings and want to align easily the table through grid. What i was doing is to use sketcher preferences and turn on the grid like this. I saw that this button 'Sketcher preferences' is only enabled when i use Legacy Sketch instead of normal Sketch.I added the button in top toolbar but this one is enabled only when Legacy Sketch is on instead of normal sketch. Is any way to enable this in normal sketch mode?
Hello, I am using Creo 9 on a windows laptop. I want to place a datum callout on a diameter dimension. However, creo automatically puts the datum on the witness line opposite the dimension value. How do I get them to be on the same side? This has been very frustrating, and I don't understand this limitation in the least. Thanks,
I'm a SW user with about a year of CREO use now. I'm on CREO Parametric 10.0.4.0. I'm playing with a PCB layout, placing major components on a motherboard. So I've dropped in a PCIe card, and attached it to a PCIe Connector, and I've got power connectors, and other hand-accessible components (buttons, switches, etc). I've constrained them all to the PCB surface, and now I'd like to drag them around and figure out which layout works best for end-user and PCB design team. The only way I seem to be able to do this is to click on a component, and Edit Definition, and then drag the arrows for the unconstrained Degrees of Freedom. That's kind of okay, except that CREO seems to really think the assembly order matters. So if I place the PCIe connector first, I have to drag that around in its DoF, but that hides the PCIe card, and associated cables since those were placed later. And if I move whatever the first component is (in this case a button), every other component disappears so I hav
Hello.I am using Creo Parametric 9.0.5.0 to export a simp rep (an assembly) of an assembly to obj format. I activate the required simp rep, then go to File --> Save as, and then change the type to "Wavefront (*.obj)". Export Wavefront dialog box is then opened. With the simp rep active, I click on "All" under the "Groups to export" section and then select the coordinate system that I want as the origin of the generated obj. I then adjust the values under deviation control, and click on "OK". When I open the generated obj file in Creo itself, I see that the origin of the file is in another location, which is different from the one I selected. Am I missing some step in the export process? Thank you.
I want to be able to see inches and mm when using the Measure Tool. I set Dual_dim to Primary[Secondary] through model properties, but that does not seem to have an affect on the Measure tool. I know that you can toggle between units through the options on the measure tool, but I'd rather not have to keep switching back and forth. Running Creo 3.0 M110
I am using Creo Parametric Release 11.0 and Datecode11.0.3.0with creo parametric 11 Collaboration Extension what version of Autodesk Inventor can i use
How to convert the assembly model in shrink-wrap as per model tree and assembly sequence with naming.I need to convert the assembly into shrink-wrap but it coming in external copy geom with no naming and sequence is disturbed.Can we have any solution (like .step file conversion)?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.