Recently active
In PTC article CS363748 are for the various Creo main versions TOOLKIT sample projects attached.However, only the Debug configuration is preconfigured for these. As our company is currently working with Creo 10.0, I have taken a closer look at the example project for this version.However, my statements also apply to the projects of the other versions.The Debug configuration can be compiled and linked, but in my opinion it is not correctly preset:The project setting "Configuration Properties > C/C++ > Runtime Libary" should be changed from "Multi-threaded DLL (/MD)" to "Multi-threaded Debug DLL (/MDd)", shouldn't it?Even if this change is made, the project can still be successfully compiled and linked.However, if you then add the line "#include <string>" to the other header files at the beginning of the program code, the DLL can no longer be created and the following error messages appear in the output console: Rebuild started...1>------ Rebuild All started:
I am using Creo 10.0.7.0.I have created a table in a Creo drawing where I want to enter values—particularly fractional values—in a specific format, as shown in the first image below. However, I haven’t been able to figure out how to achieve this formatting.I’ve tried adjusting the config.pro settings and other available options, but it's still not working. Currently, the values appear as shown in the second image. I hope you can see the difference in formatting between the two examples.
Hi, I was creating a drawing for the cabling which was done in 3D(CREO 10). While trying to create BoM using repeat region I was not able to include spools as item in BoM. Can anything be done so that the BoM contains spool details also as items and quantity be the total length of each spools required. I was able to create an additional table with spool details but was not able to combine both. Thanks in advance
I have 21 instances in a family table. The generic contains all the parts for all instances. I'm creating a drawing parts list (BOM) for each instance. I would like the instances with common items to have the same find number fixed in the parts list. I'm aware you can fix index on the part list (BOM), but I would prefer not to do that on 21 instances. Is it possible to fix the find index numbers on the generic and have that propagate to the instances as parts list are created for each instance? I'm using CREO 9
Anyone know if it's possible to reverse the zoom direction when using the scroll wheel?In Pro/E rolling the wheel towards you zooms in whereas in every other application I use it zooms out.I understand PTC's thinking in that by rolling the wheel you're manipulating the object however the de facto standard of every other app assumes you're manipulating the eye point.Thanks,Mike FosterATK
Windows 10 pro or 11 pro...Requirements: 64 GB RAMNVDIA Graphic cardStorage: 1TB 14" laptop.LIGHT weight for travel. (I Travel for presentations)----------------------------------------------------------------THANKS IN ADVANCE!
Is it possible to open SolidEdge model in Creo assembly using Creo Unite Technology?
I am looking for a way to make a radial pattern given a horizontal dimension from the circular centerline and a radial dimension from a point on that centerline and the spacing is a chord length. The first hole is 6" horizontal from the center line. The beginning of the radius in 16" below the horizontal centerline. The radial dimension between holes is a chord length of 4". To complete this I backed into it by calculating the angular spacing given the radius and the chord length. Is there an easier way to pattern this than manually calculating the angle?
hi,i have a problem with Creo View; sometimes whern opening an assembly trough Windchill the loading bar get stuck at 99% (more or less) and it never grows.Our version is old but it never shows before Creo View 3.1Windchill 10.2
Hello! My team is looking into the Sectioning tools of Creo Illustrate. We are running Windows 11 mostly with Illustrate 11.1 While reading through the Documentation, we found this page To View the Section in 2D ViewIt refers to a "Show 2D View" button in the ribbon menu in the Sectioning tab, then the Setup group. Looking at my Creo Illustrate, I see no such button there. I figured it may be hiding, so I went into the ribbon customization menu, and looked for "Show 2D View", as well as looking at everything tool in the Sectioning Category. I couldn't find anything Would someone be able to let me know how me and my team can access the Show 2D View feature for sectioning in Creo Illustrate? I'm probably missing something. Thanks!
We are running Windchill 12.0.2.12 with Creo 9.0.7.0. In the last few weeks, we are seeing workspaces suddenly going to offline mode. Windchill was installed over a year ago and Creo 9.0.7 was installed in November. Just wondering if anyone else has seen this behavior? If not, then I will work with our IT department and see if there is something with the network that would cause this. I think I have the config.pro options set to maintain connections.
Hello, I'm trying to get an existing PRT file and assemble it into another assembly.In this assembly I already have a CSYS where I want to mount the PRT. How can I do this using Toolkit? I'm using Creo 8.0.10.
Hi, I'm trying to find out if this workflow is possible with JLink. I need to start Creo, perform an analysis, create a graph, adjust a dimension value, rerun the analysis, and then output a file of the results. I have software that is performing optimizations, and automating this process would be beneficial.Thanks
Hello, I need to make a toolkit that reads the information in an Excel file. I found some libraries in C that does that and I'm trying to use one of them. The one I'm trying to use is LIBXLS (https://github.com/libxls/libxls)This library doesn't give the compiled resources, you have to compile by yourself. After some effort I could compile the library using cygwin (gcc, make, etc...). At the end, I've got the .dll.a and the dll file and all the include files.When I try to use the library in a C program and compile it using gcc, the library works fine.But when I do the same thing to compile the toolkit, it doesn't work.I tryed to use gcc to compile the toolkit, but I couldn't because it depends of some libraries and I'm getting an error when importing the visual studio library libcmt. But the library is not working when I compile the program using the default cl and link from nmake file. What can I do to use the library inside the toolkit?Or there is another option t
How to make the text underline not too close to as shown in image attached? Thanks !!
The exact calculation of the bolt force in Simulate is only possible by means of contact analysis:
Hi,I need to create a simple sweep and don't understand if the section of the sweep has to be created obligatorily inside the command.Can't I create the sketch of the section outside the sweep command and select it inside afterward? i'm using Creo 8
I am using Creo Simulate Release 9.0 and Datecode9.0.0.0Not converge for prescribed translationHere are the errors that I faced** Warning: Convergence was not obtained because the maximum polynomial order of 4 was reached.
Is there a way to change the license server for an existing Mathcad Prime installation without using the GUI within Mathcad? I haven't found anything besides changing the XML file for silent installs, but that's only for before it is installed. I'm able to achieve this for PTC Creo by changing a line in the parametric.psf file and would like to do something similar for Mathcad. Using various versions of Mathcad- 9, 10 and 11.
Hello,I’m working on a 2-speed transmission model in Creo Mechanism, and I need some help setting up the dynamic gear engagement behavior. The transmission has a neutral, 1st gear, and 2nd gear.I start the mechanism analysis in neutral condition.The input shaft is driven by a servo motor rotating at 1000 RPM.A second servo motor is used for gear shifting (e.g., a sliding collar or actuator). In neutral, all gear connections should be disengaged.When the output shaft engages with 1st gear, only 1st gear should be active, others disengaged.Similarly, in 2nd gear, only the 2nd gear should engage.All this should happen in one continuous analysis, driven by:One input servo motor (rotating shaft),One shifting servo motor (for gear selection).How can I simulate this type of dynamic gear engagement/disengagement in Creo Mechanism using just one servo motor for input and another for gear shifting?
Hello everyone,We just upgraded to CREO 11 from CREO 7. Axis are showing up as solid lines in models in 11 but show as center line 7. I've been looking for a config setting or something to fix it with no luck. Gets to be a mess with large parts. They display better in drawings, you can zoom in and see it's a center line at least. They show up correctly when printed. Any suggestions?Thanks
Is it possible to add a dimension reference to an existing ordinate dimension? In the image below, the top hole is a new feature. I want to add it to the existing ordinate dimensions, but can't figure out how without deleting everything and starting over.
I want to understand how difficult it would be to reproduce this functionality using the free version of JLink. Currently, we have some Smart Assembly licenses and use them for placing UDFs. How challenging would it be to achieve the same with JLink, so we can deploy to a larger group without relying on Smart Assembly licenses? Here is a sample bit of code that we use in Smart Assembly. Basically, it shows an image of what to select, and then the user makes a selection, which Smart Assembly uses to place the UDF.MESSAGE_BOX_EX IMAGE lib:PIC\TC_00_0.GIF GENERAL "TOPCAP AXIS" "SELECT TUBE SURFACE" BUTTONS JUNK USER_SELECT SURFACE TUBE_SURFACE CREATE_UDF lib:udf\new_axis THIS UDF_GROUP UDF_REF TUBE_SURFACE TUBE_SURFACE END_CREATE_UDF GET_GROUP_FEATURE UDF_GROUP 1 GROUP_FEA SET_REF_NAME GROUP_FEA "SA_TOP_CAP_AXIS" UNGROUP_FEATURES UDF_GROUP SEARCH_MDL_REF EXCLUDE_INHERITED THIS AXIS "SA_TOP_CAP_AXIS" TOP_CAP_SPRING_AXIS
Hi Dear, I am having a 2D Drawing which requires to show Dual dimensioning in a table for BOM. Option 1 (See attached image) :Right now by default in Creo 2D Drawing the dimensions shows up Top[mm] and Bottom[Inch]. Option 2 (see attached Image) : I would like to show dimensions side by side - Calling dimensions from Model. Left [mm] right sixe [Inch]. (I have manually written as of now in this image),I would appreciate if you can adivse how can I achieve option 2 for dimensions that are called from Model? Thanks so much in advance.
Creo is creating these loops when I route the cable, but they are not shown in the network routing. Yes, the network is continuous. The cable assembly is 4 separate connectors but the wires from one go to different connectors so they need to be on the same network. I'm not sure why this is happening. I am not recieving any network errors.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.