Recently active
I am reviving this idea because the original was archived. We have the same need. Would like the ability of Creo View to permanently watermark the PVZ viewables. This can either be embedding the current displayed watermark when the File -> Save As function is executed in the client or the ability to define a permanent watermark that is separate from the other watermarks (e.g. Copyright or Proprietary, ITAR notices) Current functionality allows for watermarking the display in the client. When a PVZ is loaded it will show the appropriate watermark that is stored on the server side or client side preference. If a user then saves the PVZ to the hard drive and opens in a stand-a-lone client, the watermark will not be shown. Use Case: User wants to save a PVZ to the hard drive to email to a customer or supplier. Once that PVZ is opened outside of the Windchill environment want the watermark to persist.
Hello, When using "Record Content" and moving or modifying multiple selected CAD items, Creo Illustrate automatically groups the animation tracks for two or more items into a sub-folder. Sometimes it is cumbersome to deal with so many sub-folders, and I find myself right clicking each item and moving it to the higher-level folder (for the sequence step). I'd like a button to disable the automatic creation of animation track sub-folders. Thanks, Wes
Hello, In some situations it would be nice to keep Illustrate open without viewing a specific .c3di file (other than when the program initially opens). I found it is impossible to close a .c3di file (for instance to rename it in a file explorer) without either opening a different file, or exiting the program. It's not a major concern, but it seems like a simple functionality.
Sometimes there are a lot of animation tracks in the Keyframe Editor, and when the animation plays it is hard to find which animation tracks correspond to specific parts that are changed, or which sub-folders are hiding those animation tracks. There is already the ability to right click on a part in the Keyframe Editor then > Select in Product Structure (Graphics Area) but it is not reciprocal, as in you can't select a part in the Graphics Area then > Select in Keyframe Editor. This would be a helpful feature.
A constant-speed option for animations would put Illustrate further ahead of the competition. Animations can easily be too fast or slow, so lots of rework is usually required to adjust time-frames. When you have the "Record Content" button pressed, any translation of an item will be recorded over the selected time frame. Speed = Distance Moved / Time Frame, and the distance moved is always different when you are animating. It would be a great feature if there was an input box for Preset Speed Of Movement, with a check-box to activate. This would override the selected time frame carets -- and determine the length of the animation track by Time Frame = Distance Moved / Preset Speed Blue = user input Red = calculated by Illustrate This would make the animation process smoother and more professional, and allow for easier Standardization when our counterpart overseas produces PVI files for us with Illustrate. @agarland- comments? Thank you
It would be helpful to be able to scroll right past the end of recorded content in the Keyframe Editor. For instance, if I want to click and drag the last track to make it longer. The only way to do this is to zoom out on the time-frame scale. If you press the "scroll-right" chevron > the nothing happens. This would be a small feature but would improve the animation editing experience. Most programs have this functionality (Excel for instance).
Drag and drop tracks in Keyframe Editor to reorder them -- just like Creo Parametric model tree. Sometimes there are two tracks that need to happen almost in sync or close together -- and it is easiest to manage one if it is directly beneath the other (instead of 10 rows lower).
These ideas stem from discussions with the PTC users whom have attended my Creo Cabling courses, my experience with competitive products and industry / customer requirements for electrical documentation. Users are looking for more common simulation, analysis / evaluation of there documented designs in Schematics and Cabling environment.1. Load based, 1.a User enters the Simulation interface, selects Load type of simulation to run, enters in design requirements, analysis runs and Entities in both Schematic highlight with tool tips describing event at those entities. 1.b Example: A surge goes through a system would highlight input voltage cables and Disconnector only if the surge is beyond the capacity of the disconnector or run through the rest of the circuit as designed.1.c Results of simulation can be Quick, saved or Features for use in Report and Tables2. Logic based,2.a User enters the Simulation interface, selects Logic type of simulation to run, Here the system e
Why can't Schematics give option on Import to ask scale to fit sheet? Instead it says too large for sheet (x by y size) and does nothing. This is not productive nor helpful. Since it already knows it is too large it should easily ask to scale to fit.
Please enhance the visualization of the Offset Sections in CreoView. Offset section is OK in Creo. It is KO in CreoView When displaying published Offset Section of an Assembly in CreoView (from the Sectioning > Preset pulldown), some Parts are sectioned with missing surfaces (not capped/closed). For example (If they are same size or larger than the holes, the issue occurs😞 The Planar Sections are OK in CreoView (even if components are in contact). The Offset Sections can be OK in CreoView if there isn't any contact between parts:
In Creo View add the ability to hide a datum coordinate system|datum point|datum axis|datum plane on an individual as-selected basis, like you can in Creo Parametric.
Today in cabling application there is a well known limitation once trying to flatten a cable which the wires route to pins ( multiple entry ports ) rather than single entry port. as a workaround ptc suggest to use "sub assemblies". this workaround work reasonably, however cause, again, issues down the line in the flattering of the cable. a solution is needed to overcome this limitation. possible solution can be ignoring the "real" length in the mfg files ( for display purpose ONLY ) in case trying to solve the issue from the "roots" either create "partial flattering" between the sub assemblies. this will improve product usability and save the user considerable time & effort
You modernized the graphtool in Creo 6.0 but there is not any probe option on Creo 6.0 and Creo 7.0 for read the clicked point values on Graph Yes, you have to place your pointer on a data point to Show x and y coordinates, this behavior already same in Creo 5.0 and other older versions, not a new enhancement. But In Creo 5.0 we can also see the clicked values bottom the graph window. It was a very useful thing to see that permanent value on there. My opinion it's not a good enhancement and PTC really sometimes disrupts what is available when trying to do new things, I hope it come again. We’will very happy to see it again on next Creo updates.
The ability to change which spool was used to create a wire after the wire was created. Currently, if you wish to change the spool, you have to delete the wire and create a new wire.
If it takes a long time to execute the round command, an icon that can cancel the processing (red x icon displayed at the lower right of the screen, see attached)Creo itself is canceled to cancel the process in the middle because it is displayed just before the end of the process.Since the removal command is displayed immediately after the processing starts, it is requested that the removal command be displayed immediately after the processing starts even when the round command is executed.
This is a product idea conversion of case 12775204. New API required to access intersection attachment of annotations (now it is possible for dimensions only).
According to the article CS245975, currently there is no API available to retrieve the name of the exploded state set in the drawing view. Please, add the corresponding functionality.
This is a product idea conversion of case 13296591. API extension required to query references of an ordinate baseline dimension, because there is no standard way to do that.
This is a product idea conversion of case 13620263. API extension required to create a custom symbol with variable text which is embedded to a note without user interaction.
1. Describe the ProblemCurrently and according to this article from the help center the symbols tab is a contextual ribbon. "The Symbol tab is a contextual ribbon tab" This means that the symbols tab only appears when an already existing symbol is selected or a new one will be created. Also the buttons such as "Gallery", "Symbol Palette" and "Browse Symbols" are deactivated until the symbols ribbon tab was activated. To activate the symbols ribbon tab it is mandatory to first select the "Symbol" button in the annotate ribbon tab. Now the users are able to select the gallery, the symbol palette or the browse symbols button. Idea/Requested feature: Add config.pro that enables the usage of the buttons "gallery", "symbol palette" and "browse symbols" without having to activate the contextual symbols ribbon before hand. This way it would be possible to select symbols faster and in a clearer way for the users. 2. Are you u
This is a product idea conversion of case 13631162. New API required to 'control characteristic' property of an annotation.
This is a product idea conversion of case 14731183. New API required to query default tolerance of dimensions.
This is a product idea conversion of case 14796412. API extension required to set 'flip direction' of a custom symbol attachment, so it will be possible to create such symbol without user interaction.
This is a product idea conversion of case 14957488. API extension required to query tolerance text of dimension which are instantiated inside a note.
This is a product idea conversion of case 14514272. New API required to query information about 'style state' of a combined state.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.