Recently active
1. What version of the software are you running?We are currently using Creo 7 and update to Creo 11 in August (Tests in Creo 11 have not shown any improvement)2. What is the problem?When a User Defined Feature (UDF) is updated (e.g. modified geometry, parameters, relations), the changes are not automatically reflected in models where the UDF has been previously inserted.As a result, designers must manually remove and reinsert the UDF in each affected part.This process:Is time-consuming.Breaks references in assemblies or downstream applications (e.g. CAM, metrology).Causes inconsistency in feature definitions across models.3. Are you using a workaround? If yes, please describe it.Yes, the only workaround is to manually delete and reinsert the UDF in every affected model.This approach:Requires manual redefinition of all references.Often leads to broken links in assemblies and drawings.Is error-prone and inefficient, especially when many parts use the same UDF.4. What is th
There anyway simple to identify what part is suppressed in a mammoth .asm? Tricks / Tips Pl ....Thx in advance!
I want to rotate an existing group in a part and delete the original. I tried: - Paste special and then used the independent option: It's not independent.- Paste special and then used the advanced option: Cannot simply rotate.- Tried Pattern: Cannot delete/suppress original. Is there a simple way to do it?
Is there a way, in CREO 10, to get the surface of an extrude to look different than the background surface?The first picture is what I was trying to achieve -- a plaque (i.e. an ornamental tablet, typically of metal, porcelain, or wood, that is fixed to a wall or other surface in commemoration of a person or event).The second picture shows how it looks in CREO, using NO HIDDEN -- anything else (like SHADING WITH EDGES) transforms it into something horrible, that cannot be understood (my colors in CREO have always been awful, never managed to get those nice pastel colors that other people show on YouTube).The third picture shows how it should look even in CREO -- I used colors to make a point, but what I had in mind was at least a GRAINY surface, different from the background surface of the respective plaque, just to make sense to someone who is trying to figure out what they are looking at (no need to look artistically pleasant, but to be at least intelligible).Any ideas would be great
Hi, I need a help to start a creo in a custom way likewise.If it start creo, the config.pro, templates & other files should be copied to local drive from the shared drive. Once i close the creo session & start fresh again it should remove the old files & then copy the same files again from shared drive to local drive.Note : this is a windchill based environment.Kindly help me with the procedure to perform this task.ThanksNaresh
I'm currently working on trying to evaluate the safety of the screws used for a lift bar of a block but seem to not be able to get reasonable values for the stresses inside the bolts. I believe that the model is over constrained but don't know how to fix it. I'm currently using Creo 11 simulate not the live one. The assembly consists of a large steel block (approx. 4,400 lbs), with a T-shaped lift bar bolted to it. The lift bar is mounted using three screws: two on either end of the top of the T and one at the base. The lifting point is centered on the crossbar of the T (via an eyebolt), and in the simulation this point is fixed. Gravity is applied in the -Y direction using -386.1 in/sec².The fasteners are 1-inch diameter UNRC coarse-thread screws modeled using Creo Simulate's screw fastener feature. They are threaded directly into the block (no nuts), with preload disabled. The materials are high-carbon alloy steels. Analysis Type: Structural, nonlinear with large defo
1. Describe the ProblemToday when you receive a Windchill Event Management notification you get the red circle with the white line icon in the bottom of your Creo Parametric window. The error will show in the logging, but that only helps if it's the last error line. By clicking the icon you can get to the Event manager window, which then you have to often click the triangle or circle icons to figure out exactly why something failed. The new-ish notification center allows for a small pop up notification along with controls to determine what items are flagged and which ones pop up. It would be beneficial if something similar happened for Windchill Events. The Notification Center server settings don't seem to capture things like upload failures which can be critical depending on your system setup. Another option is to combine these two notifications into a single more powerful notification window allowing the small pop up banner windows with the options to fade or st
Hi all , I have to simulate an Escapement mechanism's kinematics. I want to know if modeling the mechanism in Creo is even feasible before I start.It works back and forth ('foliot') and is not only a two-wheel rotation that is impacted by diameter ratios. (Key innovation: the escapement) I want to know if using a Creo mechanism is even feasible. I appreciate the answers in advance.
Hello Community,While working with Creo MBD and exporting the models in STEP AP 242 format for downstream use, I'm facing the following issues:Notes and Symbols MisalignmentAnnotations placed using the "Flat to Screen" display option are not exporting correctly.After import, their orientation and scaling appear distorted or inconsistent with the original combined state view.Semantic PMI Reference IssuesSome semantic references, especially surfaces selected for dimensions like shaft lengths, appear to be mapped incorrectly or changed post-export/import.I would like to know:Are there recommended export settings or best practices in Creo for ensuring accurate STEP 242 output (especially for semantic PMI and screen annotations)?Similarly, are there any import settings or tool-specific considerations for maintaining annotation fidelity in the target system?Is it advisable to avoid using “flat to screen” annotations when targeting STEP 242 format? Creo 8.0 user..
I am using Creo Parametric version 6.0. I need to use my drawing for multi-region purposes. When I tried to find a solution, it led to controlling layer properties using the view manager option for drawing in the view tab and the combined state option. But I couldn't find the View Manager option in the View tab in the drawing file. Where shall i find the view manager option ?
Hello, I would like to hear some opinion on Creo Unite and experiences if someone have.I used Open and Import possibilities in Creo to open SolidWorks assembly files and assemble it in top level assembly. So when using open it stay in native (SW) form and in behind Creo make wrapper files which we can see on local folders (*SLDASM.creo, *SLDPRT.creo) but not on windchill. When using import it creates links to original SolidWorks files and save it in native Creo files with .asm and .prt formats. So what are better features in case of updating that SW files when someone send it to us, to use Open or Import. As i could see so far both have capabilities of updating when you overwrite newly SW assemblies in a local folder or checking in new version in Windchill. We even tested Open and Import with inseparable assemblies , so we received SW files with virtual components (inseparable or embedded in Creo), and Creo understood that well. So considering performance , that imported component
When trying to transfer many features from one component to another component with paste special, an error occurs because wrong references was selected. But I don't want to cancel the "paste special" now, because I know the rest fits.In addition, the error is not in the failed feature "chamfer" but often one featuer before it. In this case, the error is in the points feature, but I can't get to it to fix it without losing everything else. very unfortunate.Creo Parametric 7.0.11.0
Hello, I receive the errror message listed in subject line when trying to post an NC file. I have set the "ncpost_type" setting in the configuration editor previously. I am using Creo 9. Any help is appreciated.
1. Describe the ProblemThere is a round feature containing multiple fullround items. Modify the model so that one or more of those child items no longer exist. Creo detects failed round as expected. Remove the failed ones and update. Some times Creo change the attachment option of rest of the items to surface with out user attention. This cause model to fail elsewhere. There is no warning but this happens automatically.2. Are you using a workaround?Workaround/fix is to go back and change the attachment back to solid, there were even no reason why it did change without user interaction in first place?3. What is the use case for your organization?Hmm. Use case would be a functional software not produce failures by itself.4. What impact does this problem currently have on your organization?Sometimes happened can be hard to detect as the system does not recognize it to failure anymore as it was fixed. With large model it can be really hard to pick the problem by your eye only. You can easi
2025.04.01PTC コミュニティへの提案 2025.02.10の貴方からのメールを受取り再度、技術的な疑問点についてチャレンジしたく本投稿をします 再投稿の内容については、機械系の規格関係の物であります具体的には、ねじの締結問題に絞りたいと思います。 例えば、日本国内では大型トラック・バスの車輪脱落事故は未だに解決されているとは云えない状況であると思います。 そこで、この状況を解決するためには、先ず、ホイールの取付方法と、ホイールを締結する方法の分析から始める必要があると考えた次第です。 但し、大型トラック・バスのホイール取付方式はISO規格に準拠しているので、今回はねじの締結問題だけに絞ります。 ねじの締結基準について Junkerの表と米谷レポートの概要説明 ・Junkerの表(ねじのゆるみ係数=締付け長さ/ボルト径:実験的に求めた表) 参考資料は添付資料1に示す ・米谷レポート(ねじ締結と摩擦係数の関係を実験的に求めたレポート) 参考資料は添付資料2に示す、 但し以下に概要説明のみ示す米谷実験とJunkerの表との統合一見、何の関係も見られない摩擦係数とJunkerの緩み係数L(ℓ/d )との関係とを同じグラフ上に表現する そこで、米谷の実験結果のグラフの横軸は軸力であり、縦軸は摩擦係数である一方、Junkerの表の(ℓf/d)はボルトサイズの標準化(ボルトサイズ無関係化)で(ℓf/d)値はボルトの伸び及び変異と同様である尚、米谷の実験結果は鉄鋼材料にも展開可能と仮定することでそこで、米谷の実験結果:図12の摩擦係数とJunkerの表との合体が可能になる 即ち、図12に新しく(ℓf/d)の横軸を設定することが可能になるこの手順で、摩擦係数とJunkersテーブルを統合するものですこの統合された図12のグラフから、Junkerの表の意味することが判明する 即ち、参照実験値から、論理的な繋がりが判明されていると思います。 3.私の最終目標:誰でもが安心して使用できるボルト締結マニュアルの作成 私が今迄、調査した範囲内ではJunkersの表が最も納得のいくものでした 但し、この表について、論理的な説明がないことを残念に思っていました そこで、論理的な私見を試みた訳ですが、更なるボルト締結の技術経験者は
Is there away to make a representation that puts all sub models in a assembly to a defined user defined representation? So lets say that company standard defines that each part model has following custom representations: * Medium_Rep* Low_Rep So one way would be to have a representation in assembly level that is also called Medium_Rep and Low_Rep that would automatically set every part to their .respective representation. We can off course do this manually one by one, but is there a way to automate setting of user representation in bulk? Or even entirely automatically?
Hello,Why isn't it possible to determine the angle using the table pattern?If possible, how can I make it work? The 40° in the picture.
Here is an index of Simerics-supported PTC Community webcasts and how-to videos on using Creo Flow Analysis. June 24, 2020 – CFD 101 Video Replay: Creo Flow Analysis - CFD 101 Webcast Replay August 19, 2020 – CFD 102 Video Replay: Creo Flow Analysis - CFD 102 Webcast Replay November 12, 2020 – CFD 201 Video Replay: Creo Flow Analysis - CFD 201 Webcast Replay February 17, 2021 – Creo Flow Analysis-Evaluating Gyroids and Lattices with CFD Video Replay: Creo Flow Analysis - Evaluating Gyroids and Lattices with CFD May 19, 2021 – Creo Flow Analysis-CFD for All Video Replay: Creo Flow Analysis - CFD for All Webcast Replay November 17, 2021 – Are you ready for Electrification? Video Replay: Creo Flow Analysis - Are you ready for Electrification April 6, 2022 – Creo Flow Analysis-Using CFD in Creo to Accelerate Prototypes Video Replay: Creo Flow Analysis - Using CFD in Creo to Accelerate Prototypes November 30, 2022 – Creo Flow Analysis (Creo 9.0) Tips and Techniques: Creo Flow
Whichever file I import into Creo (I tried two separate vendors with Inventor, random Grabcad models, and even exporting simple block from Creo and then reimporting it back) - it only imports as a surface. The geometry is fine (no errors) and I can easily solidify it, but I don't seem to be able to find a way how to do this automatically. I am importing large assemblies made by subcontractors with hundreds of parts, so turning each part into solid isn't an option. I have all geometry "enhancements" disabled, and all the other settings seemingly correct: Regardless, the Import feature always defaults to "Add Surfaces".Most often I am able to just change it to "Add bodies", or Solidify the geometry outside the "Import" feature - so there are no issues with the geometry I assume: I looked but I couldn't find a config.pro setting to force Creo to default to "Add bodies" instead of "Add Surfaces" (or other means to solidify the geometry). Is there any
I am working on a project to create a UDF library for screw threads in Creo 10.0.4.0 The goal is to have the user enter the nominal OD and TPI for UN threads and get the appropriate geometry driven by relations based off ISO 228 My problem is that it is unclear how to implement these. When I follow the instructions here after selecting features ( To Define Variable Parameters in a UDF ) the dialogue box suggested on step 3 just doesn't open, and the dialogue box stays at 'All elements have been defined. Select element(s) or action(s) from the dialogue box'. Features that are relation-driven (like the OD of the cylinder that constitutes the screw, or the pitch values used for the helical sweep ) are not eligible as variable elements or dimensions either (google results suggested you sometimes need to set the features/dimensions that are parameterized as variable before you use the variable parameters option, but this hasn't worked for me) My next idea is to just
Is there a limit to the length of the mapkey that I can run in the BaseSession.RunMacro(String mapkey) command in JLink toolkit? I have code that dynamically generates a mapkey to extend its functionality. I group all the mapkey parts that it generates together in one long String. Then I run that macro right before returning control to Creo. I decided to do it this way, to make the mapkey run sequentially.Depending on the number of parts in the assembly, this mapkey becomes long. Very long. Creo hangs when control is returned to it. I can only force quit Creo at that point. The debugger runs until the end of the code and then returns control to Creo, and it starts to hang. On shorter mapkeys, it is not a problem. Control returns to Creo. The mapkey gets executed. The code functions. The problematic mapkey is 4000 lines and 200 000 characters long. Is it known what the limit is? Either a formal limit or a practical limit? Then I could decide when to develop or use a workaround
Hi, I am currently converting legacy drawings drawn using AutoCAD into 3D models and draft 2D from the 3D models. I would like to draft these 2D in such a way that is applicable for all the regions. For example, we would like to show the annotations in Japanese if it's been accessed from Japan, or in English with metric units if it is accessed from India or in English with imperial units if it's been accessed from US. As all the three formats use a common ".PRT"/".ASM" file, is there any recommended way to meet my requirement without the need for creating multiple ".DRW" files? Thanks in advance. Software: CREO Parametric 6.0
I am looking to take a class that will walk me through creating a sketch from scratch and add features/cutouts/extrude etc Which class/classes do you recommend?
July 12, 2023 Webcast Replay (view in My Videos) This is the eighth CFD Webcast done by Simerics. It is for internal, partners and customers. Simerics will have a CFD expert running the event. This webcast will highlight the multiphase capability inside Creo Flow Analysis. This is a common CFD study that combines flow of phases that can be solids, gases or fluids. Typically it is combining air and a liquid. Combining Design and Prototype Iterations. CFD Multiphase Session: How to Setup CFD in Creo. Design and Prototype Changes and Updates. Reviewing Prototype Accurate Results. Getting Started with Multiphase. Questions and Answers
It would be helpful if there was a way to call a special check profile in the condition.mcc whenever the model contains one or more parameters that begin with "USR_". This would, for example, prevent extra parameters from being deleted in ModelCHECK whenever a parameter that begins with USR_ is present. Or is there another way to delete all parameters in a model except those beginning with "USR_" or "CONF_"? This would, for example, help bring old data up to date.Here two examples:IF (CONF_*) config=(check/mat.mch)(check/kon.mch)(start/mat_mm.mcs)(start/kon_mm.mcs)(constant/mm.mcn)(status/status.mcq) (name/Configurator_File)IF (USR_*) config=(check/mat.mch)(check/usr.mch)(start/mat_mm.mcs)(start/usr_mm.mcs)(constant/mm.mcn)(status/status.mcq) (name/Userparameter_File)
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.