Recently active
Hello, I'm having a problem with the dimension background. I want the hatch background to cover the hatch. Unfortunately, this can't be set, and the hatching under the dimension is still visible. I'm working in Creo 10.
Hi experts,I experienced the following behaviour.I set up an assembly with AFX standard parts (Bosch, Item or comparable), no customizations going on. Adding connectors leads to additional material cuts in the profiles where needed. When I now create automatic drawings from within AFX these holes are not dimensioned at all. When I add a rectangular cut for example, it is fully dimensioned (s. Drawing_Bosch_Profile.png). Another funny thing about this is that when I use steel or alu beams everything gets dimensioned (s. Drawing_Alu_Beam.png). Any ideas what I'm missing here? Tested it with Creo11 and Creo12 so far.
Hello, i've been tryign ot designate created command in PTC Creo JS API and didn't succed at all. Creo API can't find message file. I've been also trying to create absolute path to message file but it didn't work too. Here is my code example:// 1) Get the active Creo session var session = pfcGetCurrentSession(); // 2) Unique id for your command (make it unique per run while testing) var COMMAND_NAME = "MyJsSampleCommand_" + (new Date().getTime()); // 3) Implement the action listener var actionListener = pfcUICommandActionListener.create({ OnCommand: function (commandId) { print("Hello from " + COMMAND_NAME + "!"); }, OnCommandEnable: function (commandId) { return pfcCommandStatus.pfcCommandStatus_Enabled; } }); // 4) Create the UI command var uiCmd = session.UICreateCommand(COMMAND_NAME, actionListener); // 5) Designate it so it can be placed in Screen Customization uiCmd.Designate( "message.txt", // Message file "MyCmdLabel", // Label key from ui_message.txt "My
Hello, which configuration option restrict creo from doing it's fixing parameters for now our designers have around 200-300 errors/warnings in models due to this issue. fixing it by hand is impossibleDeleted parameters in model KM011360:PTC_MODIFIED============================================Deleted parameters in model KM011360:PTC_MODIFIED============================================Deleted parameters in model 00005675:PTC_WM_NUMBERPTC_WM_PART_NAMEPTC_WM_PART_NUMBERMC_VERIFIED============================================Deleted parameters in model 00005676:PTC_WM_NUMBERPTC_WM_PART_NAMEPTC_WM_PART_NUMBERMC_VERIFIED============================================Deleted parameters in model 00602968:PTC_MODIFIEDPTC_MODIFIED============================================Deleted parameters in model 00602967:PTC_MODIFIEDPTC_MODIFIED============================================Deleted parameters in model KM011360:PTC_MODIFIED============================================
1. Do transitions work for angle bend in sheet metal design? I can use transitions for roll bend, but I don't have much of an idea about angle bend. Does anybody have a help file regarding this?2. What is the Distinct Areas In sheet metal unbend? Any help file will be appreciated.
1. Describe the Problem Reference Ticket 17885506 We are trying to utilize copper information in our PCB. The issue is that our ECAD Tools (PADS and Xpedition) export copper information differently from how Creo imports it. From a very high level: PTC Supports certain extensions, NOT .idx. ODB++: The standard does not include thickness info, which we would like to have .EDA: Requires a plugin with an extra license for Xpedition. Siemens says the Decryptor file is old technology and not supported. They do not want us to use it. Other extensions not exportable from PADS or Xpedition. Siemens supports: IDX (Industry standard) that PTC does not support STEP: Which created very large step files. They look good, but are hard to manage in the assembly. It makes everything bloated and the process to import just the copper is not intuitive. 2. Are you using a workaround?No3. What is the use case for your organization?Having our MEs review copper information before appro
In Creo sheet metal, K factor / Y factor are fixed during the material selection. During modeling, when I change the sheet metal thickness, this K factor / Y factor are not changed automatically. This leads to wrong development length calculation. As per the below mentioned PTC article itself it is mentioned as K factor should change according to the thickness. (K factor = δ/T). This fixed value is blocking me the automating the DL drawing preparation https://support.ptc.com/help/creo/creo_pma/r11.0/usascii/index.html#page/sheetmetal/sheetmetaldesign/About_Y_factor_and_K_factor.html
we are using windchill 12 and don't have access to creo view as the chromeOS doesn't support this app.i saw the chrome browser has webgl enabled but when i am clicking on the visualization, nothing is happening. please guide me here.
I would like to measure the distance between the centre of 2 holes, usually I would select the measure tool and select the surfaces within both holes to get a distance between the centres. I have tried to do this but the measure tool seems to only want to select certain surfaces and selecting the point rather than face. Can anyone help with this please?
I am using Creo Parametric Release 3.0 and DatecodeF000Buongiorno,vorremmo spostare la licenza dal computer al server,grazieAndrea GrippinoNuove Officine Vivaldi
Creo AFX parameter and relation modificationsHello, I am working on trying to put in custom parameters and relations within the AFX parts. I figured out how to add parameters that are user defined by modifying the AFX config start_mdl.cfg file, but the relations are not working. I need relation - driven parameters for multiple parameters when any beam profile for AFX is opened so I want them applied globally. I cannot find the afx_start_model that the start_mdl.cfg in AFX seems to reference for the current relations, and I have tried adding .rel files to reference relations within the start folder and also have tried editing the param_relations folder within the beam profiles without any luck. I am not sure if it is a file location or syntax error, or if there is something I am missing. I essentially need to populate the AFX start parts for every beam profile with my own parameters and relations. Any advice or information would be greatly appreciated.&nb
Happy New Year, PTC Community! After my guest talk Class A Creo Surfacing on 11/21, the PTC Community Team asked me to come up with the first Creo Community Challenge for 2025! Freestyle surfacing is impressive if you haven't used it yet consider this challenge. 1 Modeling: using Freestyle 2 Rendering: Creo Render Studio 3 Movement: Creo Mechanism The latter 'movement' might be fun for those robotics engineers looking to dress up their robot. On the heels (and continuation) of the gift giving season for many, I am asking you to think about and be inspired by your favorite gifts such as Kidrobot characters, Isaac Asimov I, Robot or from the Foundation Trilogy and Artemis space suits, space robot exoskeletons, pendent or jewelry, Star Wars or Star Trek spaceships, armor, baby elephant or underwater drones. As the first challenge of 2025, lets get as many community members involved as possible! Deci
Could please tell us how we can open creo view for chromeos user and what are application need to install to open the
Creo Parametric version 8.0.7.0 I'm trying to create a mold for my subject and want to split the body using a plane. Which fails. Then I tried to extrude a body out of the plane I want to split, and the use boolean operation feature to either intersect or subtract the bodies. I was successful on one side, but the other side fails, which I believe the same problem it may have faced when splitting using the plane. Any advise, help is greatly appreciated. Thank you! Fails trying to split using a planeOne side successful using another body to get the intersectOther side fails trying to do the same operation.
1. Describe the ProblemIt will be very helpfull to have ability to influence by check-box additional functionality in roun feature:- add side influence- piece to piece(like we already have in boundary blend feature) for example it is like this at the moment: but when both as suggested properties will be possible to get the result should be like this: 2. Are you using a workaround?yes using a lot of new features: curves and boundary blends, then merge everything...3. What is the use case for your organization?very often4. What impact does this problem currently have on your organization?mediate I just like to have nice looking designs
1. Describe the ProblemI work with metric as my primary units and I want to have a dual dimension in inch, but to make secondary dimension (inch) format in fraction while primary dimension (mm) in decimal. As the configuration dual_metric_dim_show_fractions does only work if mm is in secondary dimension.I think the easiest solution here is to make that configuration not only for mm in secondary dimension but as a general for any unit as a secondary dimension, (and maybe can be named dual_secondary_units_show_fractions ?)2. Are you using a workaround?it's impossible unless I do a work around by: 1- changing model dimension to be in inch 2- make my drawing_units = inch 3- dual_dimensioning = secondary[primary] 4- dual_secondary_units = mm 5- dual_metric_dim_show_fractions = no3. What is the use case for your organization?Main working units are in metric but manufacturing works by imperial, so main CAD must be in metric while working drawings needs to be dual dimensioned in inch
1. Describe the ProblemThe sheetmeal module is Creo is amazing. Ive been teaching sheetmetal classes since 1992. < I like to spell sheetmetal as one word probably because Pro/SHEETMETAL established the legitimate compound word. Designers typically use the Creo Sheetmetal module to preform little debbie type of box folding type of design.One recent class to industrial designers it was inquired if there was a module like sheetmetal that would allow for specifics for folding boxes like a Little Debbie box and work on specific layout etc. I know there are specific software for folding boxes. I would refer to this module as sub module. Maybe it works with surfaces and allows those surfaces to flatten. In this case those tools already exist but maybe not meant to help designers work their magic on working packaging in this specific instance. Fusion 360 even has a PCB sub module under it's sheetmetal functions.&nbs
I have some personal designs that were made using an education version and have recently purchased a commercial/personal version (Creo version 12). I cannot open the files in the new version. The help talks about using a converter but you have to make the conversion in the education version. I no longer have access to the education version as I have retired. I am using Creo for my personal use as I am a self employed farmer/rancher. Any help is appreciated.
Posibility / configuration option which checks periodically Creo Parametric objects (sketch, part, assembly, drawing, etc.) in memory and saves changed ones with respect to user settings into working directory or workspace or only displays warning message.User can:enable/disable this functionalityset time of period and set checked object typesThanks,Vladimir
Since the Win11 update, the browser window remains in the background when the option “web_browser_in_separate_window yes” is selectedand can no longer be brought to the foreground by clicking on the icon in the system tray. This affects Chrome and Edge (IE)!
We have an existing part made from sheet metal. I'm stumped whether or not it's a Creo "sheet metal" part. I've watched some tutorials and none of them seem to be close to this use case. I'd rather not have to make punches and dies. Also, as a sheet metal part, I can't figure out how to model to the finished dimensions without creating dummy waste material with dummy dimensions that you have to get rid of at the end of the model. Seems like poor Creo practice. As a solid part, you could brute-force this as a single revolve feature. It's bordering on poor practice having that many segments in the sketch. Ideally there's a "better" way? If you try to use a thin feature instead of a solid feature, the dimensioning scheme doesn't work. Some dimensions are to the inside surface while others are to the outside surface. Also, I hate flexible modeling. You should be able to do this in either as a solid part or sheet meta
I am using Creo Parametric Release 9.0 and Datecode9.0.4.0I am using IFX to load fasteners into my assembly. When I go to re-open my assembly, the fasteners are missing from the model and give errors in the model tree. Is there any configuration settings I need to make to specify a path for these fasteners?
At our company, we're working to enhance our Creo Sheetmetal modeling practices to better support manufacturing. One idea we're exploring is adding small notches or cutouts at the ends of bend lines to help suppliers align bends more easily, without manual measurement.I've attempted to create a UDF for this purpose, but it's not as user-friendly or automated as we'd like. Ideally, we'd want Creo to automatically place these notches at the ends of each bend line during the modeling process. My questions are:Is there a built-in or recommended method in Creo Sheetmetal to automate the placement of such notches?Can bend line geometry be accessed or referenced to allow for automatic notch placement?
我用映射键偏移时,偏移自动为1.0起步,用柔性建模移动,用的是系统自带的快捷键,然后再手动拖动方向-输出尺寸,但是拖动的起步也是1.0,我知道这是我配置文件的问题,因为我不用我的配置文件就不会出现这种情况。这个配置文件已经用了很多年,也可能不是配置中设置的,这个设置是其中的哪一项我不记得了。请问有没有人清楚这个问题的所在?(我现在想把1.0改为0.1起,应该修改哪里)
Im running in Creo 10.0.3.0 and am having an issue getting usable code to post. My manufacturing assembly is generating toolpaths and everything simulates correctly. I am able to generate and save a CL file, no problem. When I go to 'Post a CL File', I choose the CL that was made, and select uncx01.p11 from the PP menu. We are using Haas VF4 mills and although this post is labeled for VF8 mills, we have had other engineers post code without issue in the past. The problem is nobody recalls what(if any) additional setup needed to be done. After I choose my post, I get a command prompt window displaying "NCL record= 200 ENTER PROGRAM NUMBER" I enter a short number like 0001 and I get the following log file: Log FileNC-GPOST Mill, Version 6.8 P-20.0, Copyright(c) 2020Build number=0279Date=08-19-2025 Time=09:54:02Input File=op010_FILE_mill.ncl.1Option File=uncx01.p11Filter File=uncx01.f11*** Tape length 12.00 Cycle time 1.48 Warnings 0 ***Date=08-19-2025 Time=09:54:
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.