Recently active
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check first component in assy is not using external references. Obviously references to skeleton models are ok, but for most of the time, it should be assembled using default.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check that the first Assembly component is only using default or coincident with default datum planes. The first component should not be placed with dimensions to the default datums. There should not be dimensional design intent for dimensions at the first component. These dimensions should be somewhere else.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check assy submodels have the proper naming convention. Running modelcheck on all levels isn't really what we are trying to do. We wan to make sure that a specific assembly does not include specific legacy files, whether library or now. We wan to just make sure submodel names are correct.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck for checking subcomponents in assembly for proper parameters (windChill location, based on naming convention and release state) including component level parameters, like line numbers, etc.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to check that the assembly is not currently exploded. Modelupdate to unexplode. We've had some individuals checkin and promote assemblies in the exploded state.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to check that the model not to be in an active Cross-Section. Modelupdate to take it out of cross-section.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check that Drawing/Annotation Notes to only be used from a certain list, where the notes contain more than one line. The notes can also contain a symbol that can be used as a variable where the user can type anything in and the error won't flag. For instance, one line in the multi-line note can say "REFERENCE PROCEDURE NUMBER 123456". One drawing can have one procedure number and another drawing can have another. Maybe the note can check against "REFERENCE PROCEDURE NUMBER #####".
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check that Drawing General Views to not reference Geometry that can fail and cause the views with dimensions to have an issue. Better to just reference orientations.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check that Model Name should be the same as File Name and Number (3 columns in WindChill). It would be even better if we can also deal with file extensions and non-compliant characters in Windchill. In other words. Filename="Name".PRT or "Name".ASM and vica versa. The name SCREW7.5IN would need to have a file name SCREW7_5IN, where the period gets converted to an underscore. Some way to have a rule that connects the three together, but allow for these exceptions.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea, we would like better Support for use-case scenarios where some instances of family tables are released and others still being worked on or tweaked from the generic's family table. How can we run modelcheck without flagging all instances as modified.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use, Allow an option for ModelUpdate or Custom Checks to go to the ALL section by default
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea Allow mapkeys to record actions made within the Modelcheck window (expand certain sections, take action on certain issues, etc.)
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea Allow the modelcheck condition file to incorporate more than 2 statements and include multiple AND/OR with parenthesis
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have ModelUpdate run on other modes besides Interactive
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check for Material Names that should NOT be using. There may be a legacy material that got used due to a save-as.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea we would like to Run modelcheck from Windchill via cadworker and view results within the browser.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea update modelcheck ASM_CREATE_VIEW with the ability to create ISO views - more complex views
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have Modelupdate EXTRA_LAYERS allow for a list of layers to be in the layer tree, without forcing its creation, such that everything else can be deleted
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea, please fix modelcheck. Right now PRT_PARAM_MAP won't actually map if PRT_PARAMETER is also available for the same parameter. This doesn't make any sense to me.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have modelcheck STD_DRW_DTL_FILE based on model units
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have Modelcheck OVERLAP_INFO - Support Geometry lines, not view border
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have Modelcheck UNUSED_SHEETS to support formats
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have modelcheck MCREGEN_VERIFY_FT_INSTS for parts as well
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea have modelcheck DIR_REPORT to be a separate location than the actual HTML files for the ModelCheck browser. Any non-local path will fail and give an error when running modelcheck
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea move out as many config.init options to another location that can be modified while running Creo AND can be set with a condition.init
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.