Recently active
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check that there are No Assembly Cuts with automatic update intersection. The automatic update intersection capability can drastically reduce performance and regeneration time.
Change the dimension to be entered to be the full height of the beam section as usually given in shape/section data tables. The entry of web height only (inside flange to inside flange), and the on the fly math is irritating. Better still, enable the selection of sections from the AFX data as an option as well.
Frankly I didn't think I had to post such a trivial idea but I do: Please make undo-redo possible within piping environment. Maybe too easy...
It would be very useful and save a lot of time to have the ability to use the Fill tool within the IDD environment as is the case with the Boundary Blend. Currently (Creo Parametric 7) to create a planar surface you need to create it after the Import Feature and then use the Collapse tool to insert it into the Import Feature.
If the imported part is symmetrical and the import error occurs on one side only, using the mirror can save a lot of time by deleting the wrong side and mirroring the correct one. Currently it is not possible to mirror surfaces inside the Import Data Doctor.To mirror a surface, you need to create a Mirror feature after the Import Feature and then use the Collapse tool to insert the new surfaces into the Import Feature. It would be better to perform this operation inside the IDD, without going in and out of the Import Feature.
If you are the true Creo User then you may like to have keyboard shortcut for rotate and panning. It will help those designer whose mouse of their laptop are not working and need to present some thing urgently.
A large assembly drawing can result in an equally significant file size for both the Creo .drw file and the generated PDF. We have already used simplified representations to do their part of the job in reducing the file sizes, loading times etc., but we are also looking into the Edge display quality setting. We are modeling 12 meter long plates, thickness around 7 mm, bent with a radius of 20 meters.In the model we experienced the need for the Edge display quality set to "High", sometimes "Very High" to have a correct display of attached parts. Low display quality settings make the parts appear to be intersecting, while in reality they are not. The effect on graphical performance of this setting seems not really significant. The 2D drawings of the assemblies and parts are by default set to have a HLR edge display quality set to Follow Environment. There seems to be no effect of setting this manually to a lower setting, even "Low" results in the same lines on both the drw and PDF. The f
Add simple drawing tool like Paint's tools to draw on an 3D representation to help explaining ideas during design review
I would like to have a new API "ProDefaultAnnotationByViewShow" which shows the annotation on drawing views by default. This is possible manually by setting config "auto_show_3d_detail_items" to "YES". Currently there are no direct API to achieve this functionality. I would like to get a new API. The new API should show the annotation on General and projection views, how it shows when we add view manually. Reference: Case Details: 15578107
According to article CS29394, a saved analysis can only be deleted on the level the analysis was created. To determine what level the analysis was created, choose annotation smart filter and hover the analysis. The article itself dates from 2016 an states it's applicable for Creo 3.0 We are now working on Creo 5.0.5.0, where dis apparently doesn't work. How can a user determine the level where a saved analysis feature was created ?
Currently there's no functionality in Creo to find the best path to assemble or dis-assemble a part into an assembly (sequence of rotations and translations). This is possible in NX, see this movie. To have something like this in Creo would be of great added value.
The "From" and "To" values for a "Curve From Equation" should have the ability to be parametrically driven. One can enter a parameter in the field, but it just reads in the value and becomes a "dead" number.
Common Features already in Creo: Side plane, Top plane, Front Plane, csys, axes, etc. Add a new feature (possibly under the Annotation tab) titled "Engineering Notebook". Feature Description: 1. Create Feature "Engineering Notebook". 2. This feature opens up a large format text dialogue box (think Microsoft Notepad or similar). 3. Engineers can jot down model notes here. Make reminder notifications for future model modifications, improvements. Make notes regarding difficult features that are present in the model. Make notes regarding feature failures, circular references. Make a wish list of features to add to the model when time is available. Make other notes pertinent to the usage, purpose, analysis, or history of the model... These are all text notes relevant to other engineers. This feature is intended to be an engineering notebook written by engineers for engineers. 4. This feature appears as an "Enginee
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea post here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to check that all Orphaned Dependencies Broken and modelupdate to automatically do it. See also: https://community.ptc.com/t5/System-Administration/Creo-Parametric-Dummy-Dependencies/m-p/328439
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check Features set to Read Only and modelupdate to automatically set all features to Read Only (except for family tables and some items that have predefined flexes).
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check for any un-embedded datums or sketches that they should be named
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to check that there are no 0 dimensions for scenarios where they could be constrained to coincident (in sketches, holes, datum planes, etc.)
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check that all sketched dimensions are Locked,, where applicable
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check All dimensions should be named when used for relations. Relations should include initial and post regen.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check All features and dimensions should be named for family tables
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check Sheetmetal flat pattern won't fail.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check there are no nested family tables (family tables in an instance of another family table)
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check that Patterns should be set to Identical, where possible, instead of General. For 95% of the time, identical works great, but using general has a much slower regen time, especially for vent holes.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck/modelupdate remove unnecessary comments. We have old files with some instructions in the relations as comments. We would like them to be removed.
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check for any sheetmetal features not using the default sheetmetal parameters for bend radius, etc...
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.