Recently active
Hi, Is there a way to rotate the dimension text by 180°? This is what I mean:Old:Rotated 180°: I saw someone suggest to rotate the view 180° in a previous post but this does not work for me. We are currently working with Creo 10. Kind regards,Jaime
I have designed the schematics and assigned the color codes (e.g., BR, BL, BK, etc.). After exporting the XML file and importing it into Creo Parametric, everything appears as per the schematics, but the wire colors or cable details are not being reflected.Does anyone know why this happens and what the resolution might be?From what I understand, this could be related to the DMT file settings in the model. However, I’m not sure about the correct sequence or procedure to resolve this.If anyone has insights or the correct steps to fix this, please let me know
Hello, I have a question about restricting the tool within the milling window in high-speed machining (HSM), similar to volume milling. I would be very thankful if someone could share any sample files of HSM. regardsAsif
I have a huge library of existing parts and assemblies that were all created with the same start part and start assembly files. If I make a change to the start part or start assembly templates, will that have any effect on existing parts and assemblies, or will it only be applied to new parts or assemblies created after the template change?
see attached video for explanation if we redefine the assembly constraint from "by interface" to "manual", the message does not appear anymore in the above assembly.(view in My Videos) @CHENAMA @FF_11835266
Hello,I'm having trouble with Creo View Adapters proe2pv.rcp settings. When assembly has multiple multibody parts all of them are published using one shape and same is for having multiple parts with flexibility.This should be easily fixed by changing conversion mode to full, but I end up with the same result no matter which conversion mode I select. Only way I can verify is when I choose Conversion Mode: Minimum Memory, I can see in log file waring as this function is deprecated."proe2pv Warning: Publishing job with deprecated option - Conversion Mode: Minimum Memory. This recipe option will be removed in a future release of Creo View Adapter." If I run in batch mode from command prompt I can see that output is only one *.ol file for each assembly component. Publish jobs are run from Windchill and worker is on separate server. We are using Creo 10.0.5.0 and Creo view adapters 11.0.0.0. Any Ideas why is that happening? Or what I'm doing wrong? /Girts
int CreateDrawingFromTemplate(){ProError status;ProMdl currMdl;ProMdlType mdl_type;ProMdlName mdlName;ProDrawing drawing;ProDwgcreateErrs errors;ProMdlnameShortdata solid_model_data;ProName predefined_template;ProName name;// Replace path with dummy placeholderFILE* mf_logfile = fopen("C:\\dummy_path\\dummy_project\\dummy_log.txt", "w");// Get current modelstatus = ProMdlCurrentGet(&currMdl);fprintf(mf_logfile, "ProMdlCurrentGet returned status: %d\n", status);if (status != PRO_TK_NO_ERROR) return status;// Get model typestatus = ProMdlTypeGet(currMdl, &mdl_type);fprintf(mf_logfile, "ProMdlTypeGet returned status: %d\n", status);if (status != PRO_TK_NO_ERROR) return status;// Get model namestatus = ProMdlMdlnameGet(currMdl, mdlName);fprintf(mf_logfile, "ProMdlMdlnameGet returned status: %d\n", status);if (status != PRO_TK_NO_ERROR) return status;// Fill solid model dataProUtilWstrcpy(solid_model_data.name, mdlName);switch (mdl_type) {case PRO_MDL_PART:ProStringToWstring(solid_m
Just wondering if anyone has either gone through the Windows 10 to 11 upgrade while running Express 8.0 to see if it works, or has installed on a Windows 11 PC.Thanks
Anyone know why fluid domain color is red in flow analysis i have add fluid and solid domain and generate the mesh but it not generated for internal fluid domain i also attached the reference image
Currently it's not supported by Pro/TOOLKIT to do also a "Revise" beside a Checkout of an object from Windchill using ProServerObjectsCheckout() like it's written in Article - CS254712 - What Revise and Check Out options in Windchill PDMLink are supported by Creo Parametric customization.This functionality would be a great improvement for further CREO-releases.
user should have ability to replace/reselect failed references in remove feature like in this example:current functionality is very limited here!User can only delete wrong references or all...Standard selection with <SHIFT> (up to boundary) should be accesible here 🙏
hi All i acutally have the same issue as this post here:https://community.ptc.com/t5/Customization/Using-the-VB-API-to-create-a-drawing-with-a-custom-template/td-p/17502 but the possibilities to fix mentioned there do not work for me, does anyone has an idea? i am using creo 7.0.12.0
In a Design Exploration session, I want to be able to save a STL or STEP file of each solution ; Currently, the save as option is not available
Hello fellow engineers, Recently I updated from Creo 7.0 to Creo 10.0. I am in the middle of a project so maybe it wasn't a good idea. When re-running a buckling analysis that used to return a BLF of about 2.5 in Creo 7.0, now I get values of about 0.5! Has anyone noticed this pattern? I believe the new 10.0 version is overconservative, as I have done hand-calculations to verify the buckling mode and the plates are nowhere close to buckle. I believe the solver must have been updated. The model in question corresponds to a crane with a telescopic boom, where the contact pads (usually solids to allow for contact definition, non-linear analysis) are replaced by a beams (linear analysis).
Hi,One of my customer is facing issue when he tries to open the Creo elements direct modeling. The error says as LISP error, CAD Angle is not allowed. Kindly help me with a resolution.ThanksNaresh
Good morning community, I have a general question about how Simulate reports rigid modes when "with rigid mode search" is checked. I created a simple part with a surface constraint and released 1 DOF (in the Z-direction). I would expect Simulate to report at least one rigid mode that would show the assembly translating along the Z-direction. The animation does show this but it doesn't say it is a rigid mode. Wondering why that is? Is there a frequency threshold before Simulate reports the mode as rigid? I released 2 DOF of freedom (in Y and Z) and then it does report rigid modes. However, when I animate it, there is some rotation of the assembly in the first mode which I would expect only translation. I attached my assembly file.
I am having issues with importing a term table .csv file into Creo schematics 7 and unsure where to look or correct on the issue. The table seems to work fine with 1467 entries and seems to start having issues of not loading and locking up schematics when additional entries are added beyond that. I am also uncertain if any blank cells have to have an entry of UNSET or if they can be left blank.Is there a limitation on the number of SET columns that can be created. Any advice or suggestions would be helpful.Thank you,Scott
I am developing a UDF for screw threads and ports and need some support understanding whether a certain implementation is possible and how to manage references to make it happen. Insofar, I have defined UDFs with a coordinate system that every other feature ultimately points to and placed these UDFs using that coordinate system and one placed in the model, or the on-surface coordinate system option. My understanding is that the basest feature(s) appearing in any UDF will be what all the other features ultimately reference. Ultimately, we would like these UDFs to be placed with reference to an axis the screw goes along and the face the screw extends from. However, I'm struggling to figure out if it's possible to manage references in such a way that those are the reference prompts. I have been experimenting for a while and can't arrange datums in a way that accomplishes this. More broadly, I've been having some trouble defining UDFs to point to anything B
I can't seem to delete a cable break after placing it. I don't see the "X" that is supposed to represent the cable break in the flat model. Anyone experienced this issue?The only way I have been able to successfully delete it is to delete the entire cable segment.
Good afternoon, I am new to using GD&T advisor, so far as a tool i think it potentially has a lot of benefits. However i am at a stage where i have completed all the GD&T definitions, and now want to add some traditional dimensions, eg. linear dimensions from datums to plane surfaces. When i try it says 'no applicable reference'. I am unsure how i can have traditional dimensions along side GD&T
I am using Creo Parametric 10. I am encountering a similar issue to what is described here: (1) Replace by unrelated component and asm0001 already... - PTC Community. From that, I am able to delete the "asm0001.asm" from my workspace and that allows me to use replace by unrelated component. However, when I try to upload the "replacement" part to Windchill, I get the error "Assembly - asm0001.asm is not unique". I checked the Reference Viewer in the part, and asm0001.asm is not listed. Where else can I check to break the reference? The part file is a family table, if that matters.
after installation of creo 11 student version the screen became black and no entities are highlited when drawn. My graphic card is RTX3050. windows 11
I am looking for a feature in Creo that allows you to select faces of two features and determine the relationship between them. For example, in SolidWorks, if you select two flat surfaces, it will show whether they are parallel or perpendicular in the bottom right corner or the analysis window. Similarly, if you select two circles, it will indicate if they are concentric or offset. Is there a feature in Creo that provides similar functionality or something close to it? Thank you.
Hi I'm trying to make an asynchronous app that help automate some processes.is it possible to iterate through all parts/sub assemblies in an assembly and add all components with a specific file name (test.prt for example) and add them to the selection buffer? I want the user to have the option to right click and hide/exclude/delete the selected components. any example of how to add components to selection buffer will be appreciated. thanks
I can define the thread hole format in the .hol file after edit CALLOUT_FORMAT line.but i can't define the countersink hole format based on this way, anyone can tell me how to define that? another problem is how to hide the zero after the decimal point?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.