Recently active
getting invalid file or format while uploading the license file. tried saving it as ".txt" format but still doesn't works.
Do We have to buy illustrator as an application addon or separate install or how does it work? Is there any way we can get a demo to try out before buy? We do a lot of installation drawings for military, and we are challenged with 2d drawings of interior assembly systems instructions. Want to see if Creo I is a good candidate and helpful.
Hello,Right now we have a customer who is giving an NX file project, so we imported the model into creo and it was opened as an assembly and then I used IDD to clean it up. Now I need to extract one specific part as a (.prt file) since we will put it in CREO tool deisgn extension (which requires .prt file). I have tried (1) Copy/publish geometry however the part does not appear when I open it. I have tried (Shrinkwrap). however this option leaves holes in the surfaces. Any help will be appreciated. Thank you.
Hi, One of the team is using Creo in VDI (Virtual Desktop) environment & facing performance issues when tried to open assemblies and drawing files. Kindly share some best practices to enhance the performances. ThanksNaresh
Hello, I am unable to change the width of a fiber shape. No matter what value of "width" I put in for shape properties of that fiber, the width remains the same on the diagram. Any help would be appreciated!Example: One of the fibers here has a width of "10" and the other had a width of "1" but it does not change the appearance
Ordinate Dimension Orientation: I want to flip my Dimension text around 180 Degrees. My Parts 0 is at the left of my drawing and is the bottom of my part. And what is at the right would be the top. So I want the bottom of my text facing the other way. Any Ideas. I don't have room to flip my text horizontal.
I am using Pro/ENGINEER and Creo Elements/Pro Release Wildfire 5.0 and DatecodeM050Dear Support Team,I would like to request the installation package for Pro/ENGINEER Wildfire 5.0 (Creo Elements/Pro 5.0), along with the compatible version of the FLEXnet License Server, in order to use the perpetual floating licenses we own.Thank you for your support.Best regards,Bompani Team
Hi Guys, I'm working on the rollout of MBD and boost in my company and facing a few problems that I can't find solutions for. I'm exporting Sheetmetal parts to CreoViewer (.pvz file) with a combination state set as the flat pattern, but the export combination state does not reflect the Creo displayed model. CREOVIEWER FLAT DISPLAY STATE:Creo Parametric Flat Display State: If Someone could point me in the correct direction to get these creo PVZ file to export with the same info as creo parametric that would be ideal. I've alot people who have abandoned all hope over this small problem.
I have a fairly simple parting faces quilt that I need to finish out but I can't get the boundary seam of the opposing cylinders to become tangent. After completing the parting faces quilt I need to use the thicken option to uniformly thicken these faces to build a gutter model; as is I can only thicken the quilt to about .125 where it will need to be .500 in thickness.Shown below is the area I am struggling with. The highlighted edges show the area that I am working on. I have penciled the non-tangent seams in red.I have attempted different options from Boundary Blend to the Style function. I have attempted this with and without curve rails in the red highlighted areas. I know that there naturally is an area of twist due to the conflicting up facing and down facing cylinder extrudes. Might there be some kind of option that would iron out the natural seams to allow tangency throughout? (I also tried this as a simple 4 sided boundary
While using the Creo plugin within Hexagon’s PC-DMIS to load an MBD model, I’m seeing some additional dimensions in PC-DMIS that were not actually created in Creo MBD Model.I’ve checked the annotations and combination states—everything looks clean in Creo. Is this a known issue with the plugin or PMI interpretation?Any suggestions to control or filter what PC-DMIS reads from the Creo model would be helpful.
When zooming in Creo Parametric 10.0.5 the text turns into squares. The more I zoom in the more characters turn into squares. Collegues do not have this problem. How do i fix this?
Hello, I often find the floating dashboard that appears when selecting something to be located right over what I am trying to work on in both the drawings and models. Is there some way I can simply dock it to one location? like the corners of the screen? See below picture for an example of the menu I am describing.
Hello, everyone. The challenge is: How to identify wire harness/cable components directly from a repeat region.Version: Creo 10.Assemblies, parts, and skeletons can be easily identified from the common repeat regions. Then, piping and sheet metal parts can also be identified from their unique parameters. Is there a way to idenfity cables/wire harness components from their parameters or properties?- By clicking "Bill of materials" button from ribbon, we get the .txt file with cable details, but this is totally useless for general BOM purposes.- Adding a new parameter is not feasible, considering the "universe" of assemblies/parts that would need to be revised. Then, not this way. Thank you in advance.
Hi Community, Creo 10 drawing interface - Is there a way to identify a missing reference for local section in drawing view properties.
I would like to create a weld symbol in creo drawing. If there is any standard symbol available in library please suggest that name.
Hello there,I tried to run a creo batch task for two drawing file in local folder , but i got the below error .FYKI , i have a creo customized in my company which has certain drawing frame update function, i am calling those functions using mapkey.May be i want to run the customized creo with this creo batch file not the standalone creo .This is the error msg in the log file--------------------------------------------------------------OPERATION | STATUS | COMMENTS--------------------------------------------------------------Connected to Creo Pro | Failed | [-40] There was a license error executing this task; C:\Program Files\PTC\Creo 9.0-M050\Parametric\bin\..\bin\parametric.exe
Creo Parametric 11.0.5 My organization just upgraded Creo parametric from 8.0.4 to 11.0.5compaarison of 11 vs 8
Facing an issue regularly while opening assembly file showing outdated component/feature. For now, I found only one way replace the each component, where there are more number of components to see the task what before day did. Took time to achieve the assembly that was in progress for last day, time completed to start from there. Someone find this issue and give a suggestion for this. And I'm using educational version creo.11.0
I love learning which is probably why I teach classes. I first learned the basics of sheet metal as a kid racing motorcycles with my dad. Whenever we crashed and something broke on the bike, the challenge was to quickly fabricate a new sheet metal bracket or mount to place properly whatever had bent. We had to be back on track for the next heat race. At the motocross track, resources are limited. Often with only a vise and an adjustable wrench maybe a grinder and a vice we are making brackets & bending other brackets to accommodate mangled geometry. My dad took the time to explain the basics sheet metal so sheet metal is personal for me. Stretch, flat patterns, grain direction & Aluminum cracks where steel bends without tearing, Everything in racing is a learning opportunity. Those early lessons taught me the value of resourcefulness, problem-solving and understanding the fundamentals of sheet metal which leads me to this challenge. Here is a great dad jok
I am using Creo Parametric Release 11.0 and Datecode11.0.1.0After making a change in the Assembly (i.e i deleted an already missing part/Assembly) and saving, the change is not retained, when i open the Assembly again, it still shows the deleted part as missing. Started happening after i updated my creo from version 8 to 11.
Hello everyone,I am currently trying to get as much information as possible out of my .pvz files using the Creo View Toolkit 12.0.But i am struggling to get the Information from Measurements especially the "Summary" one.I tried looking at the Markup class but i don't get it to work. I don't even know if that's the right approach or possible at all.Any solutions, advices or hints would be greatly appreciated.Thank you!
While importing MBD .prt models into Creo NC:The Annotate tab is not visible, preventing access to combination states.Cross sections are lost, and PMI data is not retained.Looking for guidance on how to properly import an MBD model into Creo NC.Are there specific settings or configurations required to enable full PMI and combination state support?
Hello,I am currently trying to install Creo on a new PC, but I am encountering an error during the installation process. Despite following the standard installation procedure, the software fails to complete the setup successfully.Specifically, the error occurs when I enter the Sales Order Number (SON) during the license setup.I would appreciate any guidance or solutions you could provide to help resolve this issue.Thank you in advance for your support.
Hi team, I've one doubt regarding to create a part file with extrude feature. just i need to create one simple extrude(rectangle) using Protoolkit. if anybody knows pls help me.ProError action_cb(){ ProError err;ProSolid mdl;int window_id;ProName Mdl_name;string str = "Extrude";ProStringToWstring(Mdl_name, (char*)str.c_str()); err = ProSolidMdlnameCreate(Mdl_name, PRO_MDLFILE_PART, &mdl);err = ProWindowCurrentGet(&window_id);err = ProWindowActivate(window_id); return err; } extern "C" int user_initialize(){ProError err; uiCmdCmdId action_id; const char* msg_file = "Message.txt"; string str = msg_file; ProFileName file_name;ProStringToWstring(file_name, (char*)str.c_str()); err = ProMenubarMenuAdd((char*)"Model", (char*)"Model", (char*)"help", PRO_B_TRUE, file_name);err = ProCmdActionAdd((char*)"test", (uiCmdCmdActFn)action_cb, uiProeImmediate, NULL, PRO_B_FALSE, PRO_B_TRUE, &action_id);err =
I am trying to ensure models have their Unit Sensitivity turned ON. I can toggle it with a mapkey but is there a way to ensure that it is set on (or off) for a part?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.