Recently active
Currently, notification center message need capture as a snapshot and convert to required format by manually typing before perfroming any investigation. This consumes lot of efforts when list is large. If PTC introduce a export as an excel, CSV or .txt file, it will be really help full for user during investigation phase.
I recently switched from Creo 2.0 to Creo 8.0.Visually I find it very annoying that in Creo 8.0 the highlighted lines increase in thickness (See the two attached images).I suggest adding a config option to come back to the highlighting with thin thickness line.Thanks
-In a part with several level of inheriance feature, if we want to show a PMI come from the source model, it’s mandatory to show this PMI in the source cad model. (each level of inheritance feature)-This step take times : open source file, show PMI, go to the first level of inheritance in the new part, update the inheritance feature, show the PMI …. And same operation if you have a second level of inheritance….-In some case, with Windchill life cycle, the user is not allowed to modify the source file for show the PMI, but only the inheritance model.It was very usefull if we can just show the PMI in the inheritance part without modify the source file.
Now Creo Parametric save modified size of dialog boxes in session. Each time we start new session we have to modify size of dialog boxes once again. I would like Creo saved pre-established size of dialog boxes.
When trying to open drawing that reports missing model, give user options like: - Open drawing and suppress views with said model. - Open drawing and Delete related views and missing model from drawing. - Point to renamed model and open. (Sometimes models are renamed and unless you have drawings opened at same time this can create problems, especially if there are a lot of drawings that reference said model) Currently, user has to use workarounds to do these things and get the drawing to open.
As per articles: CS274910 CS30578 CS159848 There is no way to open *.sdexp files in Creo Parametric, ideally, we would like to convert a library of *.sdexp files into a format that Creo Parametric can read. This would be required so that companies can migrate from Creo Elements/Direct to Creo Parametric and still be able to use the legacy files without having to manually open every single file in Elements/Direct and then saving as a *.pkg or another format that Parametric can open or import.
Have a temporary section view so when I'm working in my 500 part assemblies I don't have to scroll down through my tree for 5 mins to activate or deactivate a section view.
Issue:When mirroring a part that is dependent, the new model file does not have the MBD information taken from the original. The process of mirroring a part does not allow the user to specify a specific start part for MBD to use, it takes a default one from Creo. Issue description:• When creating a mirror of a part file, the users are not asked to select a specific start part to use. Steps to reproduce issue:• Create a mirrored part within Creo that has MBD information within it and see what actually comes over into the newly created mirror part file..Expected result:The user should be prompted the ability to select any specific start part to have the newly mirrored part created in.Creo could also automatically generate the newly mirrored part file with the same MBD start part used for the original part file.Reference data:• See the information provided in the case file number 15677433.
It would be convenient to be able to be able to reorder/rearrange the columns in the Open dialogue box. Typical behaviour in a Windows Open dialogue would allow me to drag and drop columns, however this isn't possible in Creo. E.g.
Is it possible to change the surface roughness of a 3D model for 3D printing? Building a prototype with 3D printing generates a model with smooth surfaces, while in reality, depending on the material, there are surfaces with different roughness.A prototype made in 3D printing with smooth surfaces, has different results compared to a prototype made in cast iron.This forces us to create a prototype with much higher costs than expected. Creo Parametric currently fails to do this.
Hi, Overlapping two (or more) model (part or assembly) simprep with option to add dimensions between them. The can choose the main simprep. Even if there is any workaround it should be in a dedicated tool. An example I did in solidworks.
Would be good if we can add our standard parameter to a multibody start part. then every time you create a body the parameters will be available in the body. not having to go through each body and adding them one at a time
It should be possible to move and rotate a set of parts and subassemblies even If they are fully constraint, for example by adding a move/rotate feature in the assemby, simular to the flexible move command for geometry in part mode in flex. modeling.The included parts are not sequential in the model tree. Also include the option to copy (instead of move) and Pattern the selected parts. The parts to be moved should be able to be selected by picking or by box-select and the move/copy/rotate should be able by dimension and with the from-to option.
Creo Parametric should be able to export URDF descriptions of mechanisms to allow easier construction of assemblies in external simulators. There exists free translators for other CAD packages (i.e. SolidWorks) but none currently for Creo, which is creating a disadvantage.
Description of Issue: I am trying to import a image in MBD model in one of the required combination state. After importing the image it is visible in all combination state. Need the image in only one required combination state. The image may contain the point chart table, the part table associated with the base model or it may be of any graph etc.As like Image if I need to import a Excel sheet consisting any tabular information of model or PDF which may contain any Tabular information of MBD model then we do not have any option to import in Creo 7.0. Requirement:Need an option that can manage the imported image, graph or any imported file in only one required combination state. This will help us to add any additional information to the MBD model in a required view or combination state.
An offer to the CREO developers to add a search function to the menu of playing the toolpath by NCL-file (Manufacturing). This function is very useful for postprocessor developers and search for specific strings of NCL-file in the play menu. + Ctrl+F
Flip multiple arrows is only available in the drawing. This function is also needed for model annotations. Here's a picture of the function for single use, when more than one dimension is selected in the model, the option is deactivated.
Creo7, when picking a feature on the screen (in part, or active part in assy), and multiple bodies, it only highlights the feature under 'bodies' in model tree. Number of bodies should not matter and feature should always highlight where it was created in the model tree, NOT only under 'bodies'. Have not checked other Creo releases, but believe it changed when the Kernel was updated to create bodies. This makes it very difficult to find where in tree that feature exists. Change software to always highlight feature in model tree where it was created and not just under bodies.
Enhance the measure tool: minimum and maximum distance in a specified direction. For example the minimum and maximum dimension between two eccentric circular surfaces or a set of surfaces. The user should be able to specify the direction of the measurement for instance by picking a line, a plane, axis, coord. system, default coord. system, delta x, delta y, delta z, or choose horizontal or vertical. NB: the ask functionality is different from the current projection option in the measure tool.
Hello everyone,If you like below thing that should be available in Creo Part modelling multibody THERE SHOULD BE A WAY TO GIVE BALLOONS FROM THE BOM IN DRAWINGYour reply is very valuable for me
Hi, when creating offset line, it is very common to have the possibility of patterning the offset lines either select many references at once. bellow you can see very common situation. adding this functionality will improve user interaction and save considerable time
The Compare Parts functionality in Creo Elements/Direct is very powerful. It quickly and acurately shows the differences between 2 parts in 2 adjacent viewports, helped by color coding. It's also easy to take measurements between the 2 parts. The Compare Part By Geometry in Creo Parametric is unreliable, slow, and hard to use. It would be great if the Compare-functionality of CED would by copied to Creo Parametric Thanks, Jaap
Hello,Activate permanently the 3D Dragger (Enable free positioning of the clipping plane) on cross-section and add it selection toolbar would be an important enhancement on cross sections usage. Thank youregardsLuis
Hello,A config.pro option plus in edit definition of cross-section to hide the outline of the hatch while activating one cross-sections would be an important enhancement on display cross sections. Thank youRegardsLuis
Hello,The support of Functional Mock-up Interface (FMI / FMU) standard in Creo Parametric Mechanism would allow to communicate with other simulations software and would be an important enhancement as a part of digital continuity.ThanksLuis
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.