Recently active
Hello, I am looking to ensure a connector is related correctly to another subassembly. I would like to relate this connector to a skeleton model, but am having trouble doing so. This connector was originally brought in through ECAD/MCAD collaborator with an IDX export from my ECAD tool. If I delete all the instances from the ECAD import and manually place these related to the skeleton model I am unable to push their locations back to ECAD. I am using version 10.0.4.0. Thanks in advance for your help,Tanner
What is the funtion for the section option, "Single Part Surface"? How do I reverse the command?
Hello, I need to start out by saying Im new to Options modeler, trying to explore the possibilities. In my scenario, I am creating a configurable product of a Hydraulic cylinder. In this scenario I have some options like Bore size, port type, temperature range etc. Is it possible to suppress or un suppress certain features of one of the parts, for eg. the cylinder barrel can have different type of port feature based on the option selected. Additionally for option like temperature, I need to be able to switch the material of certain parts in the cylinder. Im exploring this since the permutations and combinations keep growing and my understanding is that you can only add or remove a part/sub-assembly in the final BOM. The current approach would involve having a CAD part for every Port configuration and different parts for every material which again is not promoting reuse.
Hello, right now I have Creo with MDO and advance simulation. I have seen other threads using MDO for Drop test simulation. I was wondering if say I simulated the object dropping is there a way with my simulation to see the stresses/deformation present in the object after dropping. Thank you
Hello, I have MDO and advance simulation. I wanted to know if there is a way to do a drop-test simulation in Creo? I will be neeeding this to test a product that a customer is asking us to design. Any resource would be much appreciated. Thank you
We have dozens of older parts/drawings that were made before we found our footing with Creo... Now, whenever we open an older part/drawing and try to bring it up to snuff (adding shaft tolerances, using the block tolerance for what doesn't need to be explicit, etc.) someone has to make a note of all the existing tolerances because changing from ANSI to ISO changes all the explicitly set tolerances to the "standard". I understand this might be useful to some people, some of the time - but am I really to understand that this "best of the best" software package isn't smart enough - or can't be configured - to leave what is explicitly set, well enough alone?
Hi, I have a lot of "imported feature" files that seem to slow the parent assembly when opening, rotating and zooming the view.I believe this is related to the fact that CREO 9.0 tries to access the local path T:\DEFINITIVI\... linked to the imported 3D model: is there a way to unlink the 3D model from the original file path? Thank you
I'm trying to exclude parts from the BOM. I was instructed to open Repeat Regions, then select Filters, then click on the BOM and 2 options would appear, Remove: By Rule or Buy Item. But it will not even let me click on the BOM. Not sure why its not functioning properly.
Hello Everyone Does anyone know how to adjust the CL tool path player simulation speed. With the slider set to as slow as possible, it is way too fast to see anything useful, there must be a way to alter the playback speed of the tool path player. Thank you Peter
Hi all, I am learning how to run a thermal analysis on a PCB using CREO. I do not have a ECAD-MCAD license. I got some sample PCBs from KICAD and tried importing it to CREO. I tried using a .emn and .emp file extensions but only a rectangle was imported. Then I tried importing it as a .step file. It loaded all the components. But I am not able to get the Vias, Copper Routing, Solder masking etc nothing on my CREO. How can I import the PCB file properly on CREO? A proper guide to this will be very much appreciated as I am a beginner using CREO for ECAD. Kind Regards, Naresh
There is very little documentation on this. I have a simple block (in wiring diagram) with 5 ports on it. Each port has a Label attached to it (labels are not attached to the block but to the ports) I run single fibers to each port. I want the Port to grab the "color" parameter (or any parameter) from the wire and that calculated parameter will be pushed to the text label. It should be easy right? Thanks in advance! Patiently waiting....
Hi, Just joined the community, and I got some doubts in applying color coding thru EMX. I'm not still not quite good in editing parameters. and just want to implement this in our shop. so detailing will be minimized. for example I want to differentiate relief hole to a sliding fit holes (screw hole and Dowel hole). Kindly, I want to know how to control this color coding. kindly site some examples and where to locate the configuration and how to set it up. thank you, Christopher,
I’m simulating a machine where a thin sheet is cut and then folded to form an envelope around a separator. The motion study is done in Creo Mechanism, and I plan to render in KeyShot, but I can’t get the sheet’s actual deformation in Creo. I’m thinking of animating the sheet in Blender and then bringing that together with the exported Creo assembly mechanism for the KeyShot render. Has anyone tried this?
Are there any additional default system functions to be used for creating derived parameters other than the following:dg_inherit_from_ancestordg_inherit_from_connecteddg_derive_from_enclosuredg_derive_indirectdg_derive_indirect2dg_derive_as_label Can any of these be used to propagate a property value from one port to another? Thank you.
Does anyone have a fix for Creo View not wanting to compare PDFs? I add the PDFs correctly and select them to compare but in the top right the loading wheel just spins and doesn't load anything.
Just got a new laptop, Dell Precision 7770 w/ an Nvidia RTX A4500 laptop GPU. I'm having some graphics issues and want to revert back to the PTC certified drivers for this platform for testing. I'm currently on version 581.15 video drivers but I need to get back to 511.79 which is back in the 2022 timeframe. Anyone have any ideas on where the Nvidia driver archive is located? I've tried searching their support site but it only goes back so far. Creo 8.0.0.0 Thanks...
Why is Floating license needed to use replace feature in assembly. When picked new-assembly-interchange- OKError message: You have not checked out the license option. Please click "File->Options->Floating Licenses" and choose required option. SEE IMAGE ATTACH
Hi all,I have a broken piece I need to fix. How can I superimpose the pic in sketcher to draw exact profile to match and give me a accurate or close match. I have to make the red piece (See Image). Thickness is known (1.2MM). This can be a good lesson for reverse engineering. Copying the existing for upgrade .Thanks in advance. -Yo
I am using Creo Parametric Release 11.0 and Datecode11.0.0.0Dear PTC Support Team,We recently upgraded our Creo software from version 8 to version 11. Since this upgrade, some users have reported a significant decrease in the quality of 2D drafting outputs. Specifically, when zooming out in 2D drawings, the lines and texts appear blurred and less sharp compared to Creo 8.We have thoroughly checked the graphics card settings on the affected workstations, and everything appears to be correctly configured. Additionally, we have tested all the solutions recommended in the PTC community article (Article - CS169272) without success.Could you please confirm if there are any known graphics-related issues in Creo 11 that could cause this blurring effect? Furthermore, we would appreciate any effective workarounds or fixes that you could provide to resolve this issue.Thank you very much for your assistance.
Hello everyone,after I exclude the display of individual components using the Simplified Representation function, I can no longer edit KEs until I close and reopen the session. How can I, for example, edit sketches again?
Hi I want to transfer Solidworks properties into PTC Creo, I am able to directly open the solidworks part through the unite technology but when I look at the parameters tab my solidworks properties don't have a unit quantity or unit. Is there a way to transfer these aswell?
Hi, When I was working with Solidworks, there were options in sub-assemblies to show, hide or promote the components under it. When the option is set to "promote", all components in this sub assemblies were shown in the drawing BOM in the upper assembly drawing. If it was set to "Hide", then the sub-assembly was treated like a part in upper level assembly drawing BOM. It is a common practice to gather parts together so they can be used as a group. It seems there is no easy way to do it in Creo. I made a parameter called "SYSTEM_TYPE" and set the value to "Phantom_Assy", then tried to use 2 repeat regions and use filter to include and exclude parts with this value. But I couldn't make it work. Has anyone tried and success? I attach a diagram here showing what I am looking for. The BOM in GA drawing should contain comp1, Assy1. Comp3 and Comp4. Assy2 is a phantom assembly and doesn't show in the BOM. Thanks for the
I have several complex components I need to enter into CS. They have upwards of a hundred pins. I have the graphic representation in .DXF files. How can I load the .DXF files and incorporate them? CREO 11 Schematic.
Hello All, I am checking the carrying capacity of I section beam. I have applied 3000kg of load downwards divided equally into 8 bottom lugs. Two top lugs are tied to sling/rope leading towards a single point. I have created beams in creo simulate 7.0 to replicate the ropes using two end points - one on lug and one on top at a certain height..see attached pictures for your referenceHowever after running simulation I am observing a high point load on lug where the beam starts. This seems to be something unusual. I believe the load should spread on the hole of lifting lug. Can you please advise if you have any suggestion to improve the definition of sling/rope in creo simulate? is there any better way to perform it? I would highly appreciate your help with it.
Hello everyone, When I select an orientation in Creo View (Home > Orientations), the model rotates to the specified orientation. This transition takes about one second. Is there a way to make the change instant (0 seconds)?I checked the standard configuration options but couldn’t find anything. Since there are many properties available, it’s possible I overlooked the relevant one.Thanks in advance for your help.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.