Recently active
I want to know the type of variable text set in Symbol Definition Attributes of symbol instance through Toolkit. I could only find APIs related to set and get variable text of symbol instance using APIs ProDtlsyminstdataVartextsSet(), ProDtlsyminstdataVartextsCollect(), and ProDtlvartextDataGet(). However, I don’t see any API to query the type of variable text set. This is required in some cases if I want to compare the old symbol with any new symbol where i have changed the type from integer to text.
STEP files should gradually be improved to try to convey common mechanisms that most CAD packages could translate between themselves, so that when exporting a STEP file with mechanisms defined, the final recipients of the file could eventually be able to use the mechanisms simulations according to the degree of freedom available. Also, it would facilitate when importing neutral file formats of an assembly, if we could read automatically the constraints and limits available. It's a long term goal, since the format is not PTC proprietary, but this goal should be achieved the sooner the possible.
There should be a toolkit API, to get the Zoom and Pan state/matrix for Combined State without disturbing the Graphics/View.
Now, In Windchill, we can export only the list of folders and files available under a specific folder. But If PTC can provide option to export even the files under the subfolders, it will be easy to list down the folder structure of the whole Product design, for Audit purpose as well as for various usage.
Toolkit should support 2D drawing conversion from Creo Elements Direct with option: drawing associative with model. Currently, the Pro2dImportMdlnameCreate() imports 2D data only. There is no API to import 3D model with the drawing through option "drawing associative with model"
In drawing and MBD: Allow to change a created dimension to change into a reference dimension, so place the dimension between (), via a check box. Doing so you are able to switch between them.
For in the context of the assembly design wirkflows: In creo when you want to extrude up to a surface of another part there should be the possibility to do this via the blind option, picking the up to surface of the other part and that creo then fills in the rigth value for the blind depth. In this case unwanted external references can be avoided. Nowadays we have to measure this value and enter it for the blind depth. Implement above workflow for all items where values have to be entered for example also for offset datum planes
Add the possibility to do Direct Modeling into Creo Parametric with the same functionality as Creo Elements Direct has. So a designer can choose at conceptual phase of a project to get quick designs easy to modify/change and If the design is more clear: parametrize this model. Add also the push and pull functionality of Creo Elements Direct and the parts library.
Hello! ProTookit provides 2 matrices (retrieved with ProViewMatrixGet and ProWindowCurrentMatrixGet) which describe model projection from 3D model coordinates to graphics window. These matrices are some abstraction and cannot be explicitly used to set up OpenGL matrices. In case user addin needs to render additional custom graphics, which shared the same 3D model space, one have to figure out in all the details how transformations Solid CS -> Screen CS -> Window CS -> window pixels are designed behind the scenes. This is actuall gettign harder with perspective projection. There are 3 suggested ideas: either provide more detailed information about how API matricies can be used to produce OpenGL matrices, or, provide new API functions to generate OpenGL matrices, or, (as most CADs actually do) setup OpenGL matrices when rendering events are sent to toolkit users. Thank you in advance!
Issue:Cables or wires do not show up in Shrink wrapsIssue description:• When creating skeleton models and shrink wraps from assemblies, the cables are not being created in the shrink wraps. These need to show in the Shrink wraps so that MFG can see reference connections.Steps to reproduce issue:• PTC to try creating a shrink wrap of an assembly that has cables.Expected result:We expect that if a shrink wrap can be created with harnesses and they show up that the cables should show up as well. It is beneficial that users get all of their model entities in the shrink wraps to convey to MFG what is needed and going on. PTC CASE - 15641560
Issue:Cannot place a dimension off of a specific feature in the sheet metal part.Issue description:• Unable to select reference for dimension from sheetmetal model edge due to the presence of the Mirror feature.• Dependent mirror command locks the current dimension scheme.• If we suppress the mirror feature, still we cannot modify the dimension scheme on the original shape.Steps to reproduce issue:• Create a flat wall in sheetmetal (Flat1) -> Create a Mirror of Flat1• Edit definition (Flat1) -> Shape -> Sketch -> Unable to add dimension to references a different flangeExpected result:Can able to add a dimension on the original shape, so it references a different flange than was originally selected and it is directly reflected in the mirrored wall.The mirror should reference the parent feature but it should not control/ lock the parent feature to add a dimension.Reference data:• Cannot_place_dimension.mp4• frame_top_front.prt PTC CASE - 15852370
perf parts in creo are taking to long to regenerate. there also needs to be an enhancement request turned in to PTC to allow a stagger pattern with different x & y values. PTC CASE NO. - 15288411
Expand Model Copy geometry placement constraints with Mate, align, insert etc Instead of coord.system only. This enhances placement for assembling copy geometry features of complete parts, also when coord.systems are not on the right position for example in released or legacy parts.
Give the user the ability to retain the units while performing a "Save As"". In Creo Parametric with a collaboration extension, the "save as" command will change the units to metric regardless of the original models units. For example : I have an inch based part file in Creo and perform a "Save As" to a SolidWorks part file. When you open the part file in SolidWorks, the part is metric. The user has no control over this behavior.
Could create a new API for ProSurfaceSideAppearancepropsSet() let it is able to input an array of ProModelitem. Because we have a model include 90k+ surfaces to apply color if we can input an array to instead of for loop we think the efficiency will speed up.
Flat-to Screen PMI text Height does not get converted when model is converted from one unit to other unit, where as similar conversion happens for Normal PMI text height. Also there should be a toolkit API to read it.
In creo , we unable to take datum feature from parametrically prepared 3D model to 2D drawing.Or we are unable to select planes/ Centerlines As datum feature in drawing mode. will anyone help how could we annotate a plane / centerline as a datum in drawing?I tried multiple times to create datum on plane / centerlines. But its not possibly done.Rather than that on surfaces its creating datums which is not good (because surfaces having drafts/tooling operations) As Creo is parametric software it should have this kind of flexibility to generate datums on mid plane/ planes/ centerlines to annotate the drawing with minimal dimensions
The values in these parameters are difficult to access and edit in existing models. If they were added to the detail options of a part that would make changes/updates as simple as importing a new .dtl to a model. Current method to update all manual method in spoiler: Spoiler (Highlight to read)Add a note and input the parameters:&linear_tol_0_&linear_tol_0_0...&linear_tol_0_000000&angular_tol_0_&angular_tol_0_0...&angular_tol_0_000000With the note made now double click on each to bring up the edit value dialog. Input new value, enter, repeat for all 14. Then select the note and delete it.Add a note and input the parameters:&linear_tol_0_&linear_tol_0_0...&linear_tol_0_000000&angular_tol_0_&angular_tol_0_0...&angular_tol_0_000000With the note made now double click on each to bring up the edit value dialog. Input new value, enter, repeat for all 14. Then select the note and delete it.linear_tol_0_linear_tol_0_0linear_t
The embedded Chromium browser is not very configurable. A good thing will be, that it is possible to add Chrome Plugins to the embedded Chromium Browser to make the webbrowser much more flexible.
Under Mirror Component there needs to be a default ON option for "perform symmetry analysis". This should be a Config.pro option that can be put in the system wide Conffig file. See: https://www.ptc.com/en/support/article/CS306403
Like Connection, motors, dumper, springs... parameter (see pictures) it could be very nice to get access to Cams, 3D Contact, Gears & Belt parameters in Relations, so With BMX we can perform global variation even on cam friction, restitution....
Can extrude feature have draft/taper on both direction with equal taper or unequal taper as an option ?
Currently if we have model with cuts that leaves islands of material Flat pattern preview wont work. Workaround is to make unbend manually, suppress it and and "flat" instance in family table with it turned on. Nice enhancement would be to have some kind of control that would enable Flat pattern preview to overcome this problem. Problem: Workaround:
In order to analyse whether all surfaces of a MBD model are properly dimensioned and or toleranced an off-color display would be helpful. Possible solution: Temporarily off-color displaystyle for dimension and tolerance. - Blue: Surface has not been referenced by dimension. - Yellow: Surface has dimension or tolerance (some are missing) - Green: Surface is toleranced and dimensioned - Red: Surface is overdetermined
So far we have capabilities to read the Overlay Views from the drawing like using, - ProDrawingOverlayviewGet() | GetSheetBackgroundView() - ProDrawingViewIsOverlay() | GetIsBackground() But we don't have any option to create a view of Overlay from another drawing. I think it will be very helpful for the industries to have such an option to be a part of automation. Please provide us such APIs to make our life easier. If the same feature is available already in any of the Creo-developed API, please let us know too. Thank you in advance!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.