Recently active
I am using Creo Parametric Release 12.4 and Datecode12.4.0.0Hi,For an internal task I’m working on, I need to export an assembly from Creo and save it as a Wavefront (.obj) file.The assembly contains a reference part and multiple instances of that same part positioned differently. When exporting to .obj and opening the file, I’d like to rename these objects and have them appear in a specific order. However, I’m running into an issue where each part is saved with generic names like “Facet Feature id 41,” which prevents me from organizing them properly.Does Creo provide any way to assign custom names and control the export order when generating an .obj file? If not, once the .obj is exported, is it possible to edit the file afterward to apply the naming and ordering changes I need?Please let me know.
I am using Creo Parametric Release 7.0 and Datecode7.0.0.0Hello,We had a computer to use PTC creo parametric to design some equipements that was spendign long time to open every project, we upgraded this pc whit new CPU, RAM and GPU, but the problem persist, at the moment after many checks the PC is not having any bottleneck from this side.Could you help us to fix this problem ?This computer at the moment has:windows 11Intel ultra 7 265k32GB DDR5Gigabyte GeForce RTX 5060 Aero OC 8GThanks you in advanceKind regards
In any drawing which contains holes normally (written manually (2x) M12) How can i make the number of holes should be automatically generated ?
Hi everyone and happy new year, I've started the Simulation Live trial program and while following the introduction course, i'm running into a strange issue : results stays at zero for any restriction/load i might try. In the information message area, i'm getting this message : The material library is not available in the current working directory or the application data folder. I've commented my usual pro_material_dir option to make sure i'm using OOTB material library. I've also tried to copy the library or the applied material file in the working directory without success. Thanks for any help on that topic.
I have configured my model tree with some columns and sometimes it is hard to see if the part that I clicked is in the same line of the information displayed on a distant column, so it'd be nice to have an option to add horizontal lines between columns in Creo. I will put an image to clarify what I am saying.
Hi everyone,I’m working in Creo Parametric 12 and I want to make hidden lines in my drawings more visible(you can see in photo 1 how it's now). Specifically, I want:Dashed segments to be longerLines to appear clearer for printing and on-screen viewingI think i have to add a line to my drawing settings but i don't know which one. Could you please advise how to achieve this?Thank you!
Does anybody know if it is possible to also export sketches or cosmetics into a STEP file?I've tried several settings but it doesn't work. I've tried also ap214 and ap242 with "Datum", "Quilts", "Facets" and "Hidden entities" all checked but the export doesn't contain any of my Sketches, projected sketches, curves, or other 2D entities. This would be nice because we can then use it for laser engraving on our laser cutting machine. Now we are using a small cutout and then in the laser cutting software someone is converting this cutting into a single line again.
Hello Experts,I am looking for some information regarding the Creo toolkit license. I have below queries.1. Creo took kit license comes with Creo default license?2.In short say if we have Creo licenses so does this Creo tool kit license we need to purchase separately? 3.If that is the case, then which exact bundle we have purchase to have Creo toll kit development access?
I am using Creo Parametric Release 11.0 and Datecode11.0.5.0Creo Parametric 11.0.5 appears to have a horrible memory leak. Is this a known issue? SI anyone else seeing this?
How can i use two different tolerance value by using family table relations?
hollowish tubeI use this software called TubeWorks to unbend tubes with features in them for laser cutting. The problem is the step file TubeWorks creates is mostly hollow, has no ends, and has several quilts. (see attached picture) I've tried merging the quilts and solidifying but it still comes out with multiple surfaces. Any ideas on how to turn this part into one solid piece without losing the holes? I'm using creo version 9.0.5.0.
1. Describe the ProblemMy family tables utilize many dimensional changes as well as measurements for multiple instances. This can get quite cluttered and difficult scroll horizontally for a long time to find certain columns. Organizational groups or other organizational tools would be very helpful. It would also be helpful if their was a way to locate the FT dimension within the part features.2. Are you using a workaround?No3. What is the use case for your organization?This would help us locate dimensions easier within the family table.4. What impact does this problem currently have on your organization?More time and difficulty when using family table instances
1. What product and version are you running?We use Creo View Lite 12.1.2. What is the problem?If I open a .dxf-file with Creo View, Creo View does not read the drawing scale of the file.We often have files with a drawing scale unequal 1:1 (e.g. 1:2). If I now measure in the file, the measurements are wrong.3. Are you using a workaround? If yes, please describe it.We manually change the Drawing Scale in the markup tab of Creo View.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We use CAD representation from Windchill in production. There the workers use the measuring function of Creo View.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Around 500 people use Creo View to measure in CAD representations from Windchill. If they forget to change the Drawing Scale in Creo View, we are at risk to manufacture incorrect part
1. Describe the Problem Hi, In Creo, it is not possible to easily copy the name of a component (part or assembly) directly from the Model Tree.Copying a component name is possible only through workarounds. For example, one method: opening the component, selecting Save As, and then copying the name from the File name field. This approach is cumbersome and inefficient. In many workflows, component names need to be copied, for example to paste into documentation, search dialogs, or to re-insert the same component into the assembly using the Assemble command. Adding the ability to copy a component name (only text) directly to the Mini Toolbar in the Model Tree would significantly improve productivity and usability. I believe that this enhancement will increase the usability and efficiency of Creo users.It is a quick win that likely requires only a few hours of development time but has a big impact on usability and efficiency. Thnaks. 2. Are you usi
Hello everyone, I’m using Creo 8.0.9 and I need to create a sticker adapted to the surface, but for that I’m using a decal.When the sticker is flat, applying the decal is easy, but when it’s curved, it becomes very difficult.Is there a better method?Or is there any parameter in the planar mode that can be set to automatically adapt to all surfaces?the surface its a extrude on a spinal bend
I have a drawing where I've added additional rows to the revision block (1 per revision) and filled out the information. I save the drawing and check it in but the text doesn't show up. If I add this drawing to a new workspace, the text I added isn't visible but if I click on each cell in the table row the text is in fact there. All I have to do is click it and select OK for it to become visible again but then on check in it becomes invisible. As a result, the published drawing doesn't show this information. This is the only drawing like this... I verified that all the properties are the same as the row that is visible (row for rev A). Making the text show up on my drawing and checking it doesn't seem to persist.
Hi, I'm looking for compatible versions of Visual Studio to customise Creo Parametric 12.4.2.0. Is it okay to use Microsoft Visual Studio 2026 (available as latest version) or safer to go for previous versions? Thanks.
Creo 10.0.6 I'm trying to set Detail Option config default_ansi_ord_dim_aligned to no in a drawing but the OK and Apply are greyed out. Tried both in part and drawing with same OK/Apply greyed out result. Drawing and part are checked out. Config ord_dim_standard is set to std_ansi. I can change other config options and OK/Apply are available. Seems like something simple I'm overlooking.
1. Describe the ProblemCED License Server 20.8 not supportable if you cannot access the web interface from the client computerHello all.The new CED License Server 20.8 is not supportable if you cannot access the web interface from the client computer.For example, if a user reports that he does not receive a license, it was previously possible to access the web interface via a web browser with:http://SERVER-Name:17171to access the MELs and check whether licenses are still available or whether the license server service is running at all.This is no longer possible with CED License Server 20.8 and is therefore no longer supportable.Then at least the possibility MUST be created that you can check from every client computer whether the license server is accessible and whether licenses are still available, as in FlexNET with the ptcstatus.bat.So the CED License Server 20.8 is not really applicable and usable.Best regards,Christiane2. Are you using a workaround?No there is no workaround.3. Wh
In all modeling versions, options for standard-compliant representation according to ISO 2553 are missing
"The code execution cannot proceed because mfc140u.dll was not found. Reinstalling the program may fix this problem."Please show me how to install the above file "mfc140u.dll"
Hi all 🙂 in C9, compared to c4 that I'm used to, dimension witness line has selection priority over everything else.I.E: auto - added angular dimension is exactly where the sketched line ends, and when trying to select line endpoint, I have to be aware of not selecting the dimension, if i need to drag the geometry. Else, when I try to drag geometry, but with this blue dot selected it drags the dimension and locks it as user modified.This is more than disturbing, as the dimensions at random have this "blue dot" drag point exactly where geometry ends, and i did not found a use case for selecting such witness line instead of dragging the dimension text/ value itself.question is, does config option to erase these dots exist? or to change this priority back to geometry ? so I don't have to mess with selection of the witness lines instead geometry?Thanks, cheers 🙂
Hello everybody!My company has just acquired Creo Parametric and it needs to develop add-on extensions to it. From the other hand, we have tons of useful C# code that we we want to reutilize.I just started to design the extension and my plan was to implement a 3-tier architecture consisting from the following layers:- DLL client build with Creo Object Toolkit C++, which may be registered as extension to Parametric.exe- Middleware build with C++/CLI which will allow client/server interop- C# libraries consumedUnfortunately, my trials so far to make server DLL extension dependent on the middleware class brought to the Parametric crashes.I'm absolute newbie to the Parametric programming so I would like to start this first post with some general questions.Do anyone has the experience with the using C# code from Parametric?Is the direction I tried makes sense with Parametric?If yes, what may be the causes for crash? (I will share code files as necessary)If not, what are the advised directio
How can I find the length of the profile when I select?I use this infos the boom list. I would like to add profile lenght.
I'm trying to access the model name and read it in a tree format from Creo ED. Tried a few Lisp APIs I saw in the document; didn't help much as none returned the model name. https://support.ptc.com/help/creo_elements_direct/r20.3.0.0/advanced_documentation/integration_kit/reference/function_index.html Is there any other way to access the data? C# also doesn't seem to have the related API on Part
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.