Recently active
When editing a family table in excel. Excel is asking for a location to save the file after editing, rather than saving to the temporary file and exiting to the family table. Therefor the changes are not made to the table. This is intermittent for some, consistent for others. Creo 10, Windchill 4, Office 360 2507
Folks I have an assembly with two components in Creo 10.. Intially, i had a subassembly instead of the shrinkwrap part but these boolean operations wont recognize assemblies. The cylinder represents the cavity that we are restrained. the part represents our final 3D print part that fits inside the cavity. So I want to cutout all the external geometry from the tetras part outside the cylinder volume. I tried picking either one as the modified models/modifying components without any results. Tried different sizes of cylinder and no good. I wonder if i should use the "create part intersect" which also didnt work. Any ideas please share thanks
Traditionally, our company uses a revision block on 2D drawings to show the current revision and list all changes from the previous version. As we transition to model-based definition (MBD), I'm trying to determine the best way to display revision history directly within the 3D model. My first thought would be to use a table similar to what we do in 2D drawings; however, I am currently using Creo 7.0.2.0, and editable tables are not added until Creo 11 from what I've seen. My second thought would be to have separate combined states for each revision displaying everything that has changed, but if a change is made to a dimension that is not initially displayed in the model, such as basic dimensions, how should that be documented for approval purposes? Another thought would be to use "Is/Was" reports, but this seems to be tedious, and I had the same question about what to do with dimensions that are not initially displayed. Would anyone who has experience with this be able to we
Hi, I’ve been trying to identify the stress distribution while twisting happens through simulation but haven’t been able to get accurate results so far. Could someone please assist with setting up or running the analysis? FYI: all parts are plastics(PP), motor will be 10 nm, the blue highlighted area are screws, and the red highlighted area is load acting.Let me know if you need any.
I am trying to follow the steps detailed here to learn how to create a add-in for Creo 12.0 using the Creo Toolkit C++:https://support.ptc.com/help/creo_toolkit/protoolkit_plus/usascii/index.html#page/creo_toolkit/get_started/Using_the_Microsoft_Visual_Studio_Solution.html#However, my computer will not let me unzip the file where it is located (it is within program files), and when I unzip it somewhere else, the protk_install_example can no longer access the files in protk_appls. I've verified that the C and C++ compilers are included in my version of Visual Studio 2022.Any ideas on how to unzip this file and build it successfully?
When I drop another UI component into a ProUITree, how do I make it sit exactly inside a property-sheet cell? I’ve tried hard-coding the size and position, but nothing lines up. ProUITable snaps the component to the cell automatically—can ProUITree do the same thing?
Hello, Currently using Creo View 10.1 Is there a functionality to create section views based off of user defined reference planes that are created from references to points, edges, and planes on the objects being observed?
We’re encountering an authentication issue with Creo View in our shop floor kiosk setup and would appreciate any insights or suggestions. The below issue is observed after configuring Windchill with SSO Environment:Windchill 12.1 with SSO EnabledCreo View 11.1 Setup Overview:The kiosk runs on a shared local Windows account (saaccount) used by multiple users to log in.Once logged in, users access the Windchill 12.1 application via Chrome and authenticate using their individual Windchill credentials.When they attempt to open a CAD object using the “Open in Creo View” option, Creo View fails to launch and returns the following error:saccount, 500 – You are not a registered Windchill userObserved Behavior: It appears that Creo View is attempting to authenticate using the Windows login (saaccount) rather than the Windchill credentials used in the browser session. Since (saaccount) is not a registered Windchill user, the authentication fails. Has anyone faced a
Hello Team,-Creo 9 with Windchill.I'm looking to create a mapkey to quickly open a drawing of a room that's already open.I've done a lot of research and i can never find a working solution. please don't redirect me to an alternative solution.I know that a part can have several drawings or be included in other drawings. However, in my case, 90% of the parts created have only one drawing, which has exactly the same name as the part, with .drw instead of .prt.I've created a relationship: DRAWING = PART_ID+ ".DRW".I now have a parameter with the right value.Since copy and paste doesn't work in mapkey commands, is there a line of OS script code that you could put in a mapkey to say, open "parametre drawing"?I work in a company that doesn't allow third-party applications to be installed.Thank in advance.
Hello, I used a subscription to simulate.Budget restrictions...I only have Creo 3 with Simulate "Light".I'm being asked to simulate a chassis in Step.I'm afraid Simulate won't allow me to convert surfaces to shell pairing and perform fatigue calculations.What do you think? Is it better to refuse?
Sorry in advance if this looks confusing but I'm wondering if someone can shed some light on this. Looking to route a wire from off the screen at the top left to the center of the picture (where the wire is currently going) is there a reason it's not following the remaining section of the network (in black) to get to the connector? My only guess as to why it's doing what it's currently doing is because the intersection where it should go is to tight of an angle based on the bend radius of the wire. If that is the problem is there a better way of fixing it besides adding more points in my network? Really wish the network would be more straight lines and then let the wire dictate the curve. Thanks
I am new to the PTC Creo Direct Modeling Express 6.0 setup, and downloaded this free single user CAD tool to get started with making 3D objects. I choose the 64-bit version, and installed on my Windows 8.1 machine. After installing, I want to start the program, and it asked me to activate for new users. After registering for an account with PTC, I then attempted to activate, and get the following:Connection failed.For Modeling Express to automatically activate, it requires access to the internet. Please check if a proxy has to be specified, and enter your company's proxy server details so that the activation can proceed.I don't have any proxy settings in my browser, and am on a home network behind a NetGear wireless router. I do have access to the internet, and can't seem to determine why I am getting this message. Has anyone else seen this before? Any idea what I need to do to get PTC to see the internet?
HelloI am trying to simulate the motion speed of a mechanism operated by DC motor.DC Motor Rotation Speed varies with the input torque as attached graph. But it seems impossible to define Motor Rotation Speed by using measured inputtorque in MDO.(There is only servo motor, whose speed does not depends on input torque) In this case, are there any method to simulate with the DC motor? I can calculate this motion in excel or mathcad, based on Torque value at each position angle from creo simulation with servo motor.But It would be great if this could be done just in Creo, or with a simpler workflow
Hello community, Is there an automatic method for restructuring a multi-level assembly to a single-level assembly? Thanks
Hi Everyone, This is for general discussion for the possible cause of "fatal error" while working with CREO. I would like to know from tech guys that what are the major reasons for this particular error. Please if any body knows, please do share your views. This might be helpful to many. And please give the reasons priority wise. Highest Priority cause to lowest priority cause. Regards, Jignesh
In Modeling Express, I have figured out how to save a single part as a STL using the "Select" button in the Save dialog, or I can save as STL all of the parts using the "All Objects" button in the Save dialog. Is it possible to in the save dialog to save just a subset of the parts (meaning, more than one part but less than all parts)?
I am using Pro/ENGINEER and Creo Elements/Pro Release 17.0 and Datecode96130I changed the license host from a computer that died to the new device in the PTC licensing management website, but am having issues installing Creo with the new licensing information. I saved the license.txt file to the new device and it keeps telling me that the license server is not reachable, despite the fact that the license server is the local computer.
How can i create a datum plane parallel to screen orientation? Default coordinate system is oriented in the default orientation as i enter in an empty part model. I want to create a datum plane parallel to the screen, while the coordinate is in the default orientation.
I am using Creo Parametric 2.0 M250Hello PTC Support, please provide a download link for PTC Creo 2, latest datacode.
Hi All,In one of our machines, we installed Creo 12 with a Node locked license. Generated the license based on the host ID shown in the Creo installer. Creo runs perfectly. After a few days, it stops with the error (-9) invalid host ID. When we check, the previous host ID is no longer shown. It shows a whole different Host ID. Any assistance would help. If not, we may have to escalate to PTC.Regards.
Good day,I’m trying to redefine the default coordinate system that Creo assigns to a part or assembly.Background:I have a main assembly representing a vehicle, which is divided into multiple subassemblies — each assigned to a different designer. A recurring issue arises when a designer does not use a skeleton model: the parts or subassemblies do not assemble correctly when using the “Default” constraint in the main assembly.With a large top-level assembly, it becomes quite time-consuming if every designer has to manually constrain each part or subassembly to the correct position.Workaround Tried:One approach I’ve used is to create a new coordinate system in the desired position, export the part/assembly as a STEP file, customize the export to use this new coordinate system as the default, and then reimport it. This works, allowing me to use the “Default” constraint correctly — but it’s not an efficient process.Question:Is there a more direct or recommended way in Creo to redefine or re
Hello, I'm asking help to know if there is a way in assembly to make constraint play on values of a flexible element. I have a 6DOF robot arm saved as an flexible asm. To place it I'm currently making his base's origin concurrent with the floor's one (cf. constraints.png). In order to make it looks like the right position, I change each angle of rotation he had (which are all 6 flexible elements) degrees by degrees which is painfull (cf. flexible elements list.png). Regarding this issue, I want to know if it's possible to add an other constraint on the robot arm, this time with gripper and make both of his constraints change the value of the flexible element instead of changing all by hand.PS : I'm a using Creo 11
Hello there,Is there any similar methods to run a native python or .cpp file in creo as like we do in Unigraphics NX ?I am trying to connect to a creo 9.0 environment , from external command prompt as like creoson, but after that can i pass the creo toolkit commands to creo via that terminal ?
Is it possible to download old PTC software during Sustained Support? Unable to find old datecodes of expired PTC products on Software Download web page. Is it possible to download installation files for products which are expired and no longer part of Standard Support policy?
Hi Creo Team, While performing Dynamic Time analysis should the mass normalization parameter sim_massnorm_modes in Config.pro be set to 'Yes' or does the Dynamic Time analysis automatically sets the parameter to 'Yes' when running. Regards,GS
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.