Recently active
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 9.02. What is the problem?Creo Illustrate does not allow the users to set a background color of a note box for transparency3. Are you using a workaround? If yes, please describe it.No workaround. We are using as the intended behavior.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The idea is to allow the users to set a background color of a note box as MS PowerPoint supports. Creo Illustrate also would have an option to set the background color of note boxes. This will bring more visible transparency to allow annotations to be placed without obstructing the view when working on drawings or illustrations,5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It is at a pilot phase wit
Hi AllI have a surface in a copy-geom which references many features in my model.I now want to create a surface feature and remove the copy_geom so that it is no longer dependent on my skeleton model.Is there a way to reroute all the references in one go?Creo Software version 10.0.8.0
Hello, Looking for an explanation of some strange results I am getting in Creo simulate. I am wondering if I have the model setup incorrectly. The model is not that complicated. its a bolted assembly with some external masses (sensors) that are associated to the bracket via mass elements and weighted links. I am trying to understand displacement of the mass elements when they are excited at resonance. The oddity I am seeing is the massive displacement at frequency 0 (clearly not a real result). Any help or thoughts on this matter would be great! See the details i have posted below.
Hi All, I'm resurrecting an old thread as I am curious if PTC have resolved this modelleing limitation in later releases. I did try to message the moderator to reactivate the old thread but was informed it is best to start a new one: Re: How to model a helical sweep cut that matches ... - PTC Community Does anyone know if this is now possible in later relases? I am currently using 7 but no updates here. FYI my part does not have a standard helical pitch, I have datum curves generated by co ordinates, so it would not be possible to use the volume helical sweep which I beleive was a new feature added to V 7 to tackle this issue for set pitches.
Dear community, I can't add Insets to my figures.When i my collegeas open the same file they can add it.I can change the added insets from my collegeas.The mouse pointer stays the same.
Hello all, Does anyone have an example of how to use G93 in programming 4 axis contouring work with Creo Manufacturing? We have a machine with this capability and I'd like to try it. So far I have been able to get the post to put G93 in the right places, but it puts a F0. for feedrate. Even if it did work, I am not sure how this really works. G93 as I understand it interprets feed commands as inverse time. So if my feedrate in IPM is 100, but G93 is active, the move will occur in 1/100 seconds? How can that be right? A short move takes longer than 100IPM would linearly and a long move takes the same amount of time so it moves much faster than 100IPM? Maybe I am misunderstanding how that works, but that is how I read it. Thank you for any help!Matt
I am using Creo Parametric Release 5.0 and Datecode5.0.6.0Creating branch is manual cabling showing dotted line so unable to create wire or cable
Hello. I have a project in which I use AutoCAD. I have several files in .edz format that I need to open to convert them to a format compatible with AutoCAD. I open one of these files in Creo View Express 12.0: And the following message appears: Does anyone know the reason for this error and how to resolve it? Thank you in advance for your answers.
I am using Creo Schematics Release 7.0 and Datecode7.0.0.0I have created a custom catalog and added some connector there and need to edit for that password are required to set I followed the instruction but encounter the error in command prompt. F:\sch>"C:\Program Files\ptc\Creo 7.0.0.0\Schematics\x86e_win64\creoschematics\bin\password" set custome24 "ptc@123" RSDesigner Password Utility change_directory: cannot change working directory to custome24 F:\sch>
Hello All, I am attempting to download the free trial of Creo for an interview. After filling out the online form I received a thank you message but nothing else. What am I missing? Thanks
HI Expert,I have below condition and would like to know how the Creo licenses will be utilized. I have a single Windows workstation with Creo (WC 12) installed, and the machine has two local user accounts (User 1 and User 2).I would like to understand how Creo licensing works when multiple users share the same machine:If User 1 logs in and starts Creo, but does not close Creo before logging out or switching users, and then User 2 logs in and starts Creo as well — how many licenses are consumed?Is this counted as one license (because it is the same machine), or two licenses (because there are two user sessions)?If User 1 does close Creo before logging out, will User 2 be able to start Creo normally under their own login and use the same license?In general, what is the correct way for multiple users to share a single workstation and use Creo with the most efficient (optimal) license usage?Are there any guidelines or best practices for concurrent users on the same machine?Any officia
Hello everybody!I'm using Creo 7 to simulate a mechanism that uses a piston (slider constraint with lower and upper limit, the green part) to partially rotate a cranck mechanism . The problem is that the rotating part wants to pull the piston beyond its limits and then simulation crashes. Actually when the piston is fully extended it acts as a rigid body, What I'd like to do is:- Extend the piston- Start rotating the levers- Stop rotating- Retract the pistonAny suggestion? I thought to replace the piston with a single part (a rod) but as simulation is not "correct" Any suggestion?Best regardsStefano
I am using Creo Parametric Release 12.4 and Datecode12.4.0.0I want to know the proper way to upload the new version of the license as it look different from the previous license.
1. Describe the Problem Hi Creo provides a helpful list of recently opened files, which allows quick access without repeatedly navigating through the file system. However, when selecting a Working Directory, the user must manually browse to the desired folder every time. There is no option to choose from a list of recently used directories, even though switching Working Directories is a frequent and repetitive action. In my estimation, adding such an option is not complex, yet it would provide significant value to all users. 2. Are you using a workaround?The only available workaround is to create Windows shortcuts or use the Windows Favorites section to store commonly used project folders. Another option is to start Creo directly from a specific folder. These workarounds are external to Creo, not integrated into the user interface, and they are not practical when switching between multiple project folders.3. What is the use case for your organization?Our team works on several proje
Hello, after the upgrade of win 11 from 23h2 to 24h2 Me10 (CoCr2D CAD doesn't work anymoreWhere is the problem? How can I resolve it? Best regards
Hello everyone, i am struggling with an issues and need some help. I created new line styles, I create them from "manage line style" and click on "new". I can't use them only in that specific drawing and i want to be able to use in any another drawings. How i can do that? I was looking to find the file where every default style is (geometry, hidden ecc), where the "line stye gallery" takes from but i am not have been able to find it. I found this Adding Custom Line Sytles to be used in Detailing - PTC Community and this Article - CS62031 - Is it possible to store *.lsl Line Font files in a specific directory in Creo Parametric The issues is that i can't find any .lsl file to copy from and know what to write to create this file.Aboute the template method mentioned in those links, it is possible to define a drawing template with line in it? Maybe i should fine the correct enviroment to create line add them to the options? Thank you for r
Hi I need an example code for attaching custom symbol/Annotation Balloon to dimension(Prefix/Suffix) based on the dimension displayed in the drawing . (Thanks in Advance)
Pozdravljeni! Imam težave z dimenzijami v načrtih! Ko pregledujem načrte, ki so bili prej ustvarjeni, imam težave. Besedilo za dimenzije izgine ali se zmeša. Kako rešiti težavo? Hvala in lep pozdrav, Gregor
Hello,we are using Creo 12.4.0.0. Scince this version we have a problem that the BUW_NAME from profiles (Aluminium) will translated from the German Profil to Profile.How can we prevent/correct this?Thanks for your help.RegardsUte
Hi,I have a question on working with imported features.The model I have contains surfaces / quilts which have been imported.I need to edit the model, for which i need to get into import doctor environment to make the changes.so, 1. I would like to have the quilts highlighted in the model tree as i pick it in the graphic window, currently this doesn't happen. is there a config to change this behavior?2. Is there an easy way to perform surface operations to get rid of multiple unwanted quilts (like using Revolve or extrude cuts). Currently, I could only identify the below option, but this gets rid of only one quilt at a time.Thanks.
Hi,Can anybody help me understand the logic behind how the layer grouping works in creo drawing?
while creating views top view is not symmetric in creo symmetric
I am using Creo Parametric Release 8.0 and Datecode8.0.0.0许可过期,申请新许可文件,谢谢!
Trailmaker is now a collection of small utilities:1 - TrailmakerA script to build customized trailfiles, to process files in batch mode.Here some ideas that you can make this script work for you:Export multiple parts to Step/IgesImport multiple Iges/Steps to Prt´sExport multiple Drawings to DXF/DWG/PDFExport/verify all instances of a family tableBring multiple parts/drawings into sessionPlot a lot of drawingsRun a mapkeyChange/add/delete ParametersModify Units/Mass PropertiesCreate Jpeg´s of multiple partsMix all this together...Lots of possibilities. Video Link : 5303 2 - AssemblerScript to assemble components (by default) in a assembly in batch mode;3 - FT-DrawingScript to create drawings for each instance of a family table; Video Link : 5305 4 - New_Drw Script to create a new drawing with same name of the active model;4 - Open_DrwScript to open a existing drawing with same name of the active model;Download link:https://www.dropbox.com/s/nprv7wx6u2iog2n/TrailMaker.zip?dl=0Open Readme
Hello,I am hoping someone is familiar with a way to tie the "color" parameter in block properties to the shape's color representation. I assume there is a need to designate each RGB or whatever value within the shape section with a name select-able within the block properties.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.