Recently active
I am using Creo Schematics Release 9.0 and Datecode 0.0.0How is Schematics 9.0 integrated into Windchill. The WWGM 12.1.1.1 does not offer Schematics 9.0 as an application.
I am setting up a simple beam bending simulation of a simply supported L channel. its 3x2x.025. It is 24" long and 2 equally spaced load of 25000# each. When I verify my results using the bending equations I am way off. Can anyone suggest what is going on?
Referring to CS80656, I want to convert a quilt surface to STL, but for curved surfaces (mirrors) it behaves like overlapping points. How can I avoid it?
Hi,I'm starting to evaluate the Design Exploration Extension, for now I find it interesting but perhaps too limiting.Anyway, the question is: Is it possible to rename a Design Exploration session?Thank you.P.S. I use Creo 9.0.2.0
I am using Creo Parametric Release 6.0 and Datecode6.0.3.0Hi Team, The bitmap image is attached in a drawing as an object but after check-in, it's not showing in creo view, and after checkout same drawing in creo its also not visible in creo.
Often, when working on parts, especially in assemblies, I'd like to view dims from multiple features - at the same time. Or both feature and assembly dims. I can't find a way, so I'm hoping you know about another bit that PTC hid away. Coming from an older version, this is maddening. I feel like I am licenced to fly and F15 but only allowed in the Cessna 150. I have resorted to working with a pad of paper so I can write down dims from all the desired features and assembly positions, so I can at least be partially productive. This is especially useful when looking for minor interferences when there is a stack up - and for making similar changes in many features or parts. I don't even see a way to see all the dims from one feature with 2 sketches like a sweep. Please tell me I'm missing the obvious. Thanks.
Hi All,I would like to create a Mapkey that not only creates a STEP file, but also renames it. To further complicate this, I would like to pull parameters both from the part as well as the drawing of the part.Format would be as such:(part number)STEP_(drawing number)REV(drawing revision)Where the part number would be pulled form the part parameters, and the drawing number and revision would be pulled from the drawing parameters. Am i crazy? I realize I'm going to need some sort of external .bat file to run various commands, but I'm not sure where to start. Any help would be appreciated.Currently using CREO 4 M150 and Windchill 11.
How do I find the expiration date of CREO license on my computer? Best,Cruz
Is there a way to use a different parameter if your primary parameter is blank that your title block references? I want my REV cell using &ptc_wm_revision to use the parameter drawing_rev if ptc_wm_revision is blank. example: if ptc_wm_revision is blank use drawing_rev, but if ptc_wm_revision isn't blank then use ptc_wm_revision. This would be used if a team is creating drawings outside of windchill due to location, but when we put them into windchill at a later date then the revision assigned from windchill will override the prototype revision.
Hi So for my masterthesis I currently am testing the possibilities and restrictions with a 4-axis milling machine (Roland MDX-50 with a rotational A-axis). I am now trying to mill a football (or soccerball, I'll just call it "Ball" from now on) as you can see in the image below. Normally we do this on a 5-axis machine, but the goal is to see if the MDX-50 can realise this piece and how precise it will be. Image 1. Ball I already made some volume roughs (with a 6mm End Mill) and profiling steps (with a 2mm Ball Mill) on the top- and the bottom side. So it will look like this: So I currently have 2 Coordinate Systems (further abbreviated as "CS"), 1 on the top and 1 on the bottom half. I used each CS to define an Operation. I can select both operations and ask to perform the Remove Material Simulation (as visible in Image 2). The simulation will do as I ask, but between the 2 operations, the tool will "teleport" from one place to another, because the sec
Hello, I have not used CAD in a while and was trying to copy a plant tray I had at home to get back to ease myself back into the program; however, I have run into problems. Perhaps I am using the pattern feature incorrectly, but when creating a new pattern based on simple extrusions and a chamfer, the program runs quite slowly. As a result of this, when I try to create a shell pattern creo always crashes and is unable to complete the action. Does anyone have any advice for me please? I have attached the file. Thanks.
When generating a step file of a part designed with generative design, the step file becomes very large. Is there a way of reducing the file size?
I have a requirement to Export my Harness Drawing created in Creo Parametric to a format which can be imported into Capital Harness System(CHS) either it can be .dsi, .xml or .nwf. Please let me know if we have a option for that
You can see two quilt icons in the Design Tree. (one red, the other purple)I am curious about the difference between these two icons.
If the first digit of the tolerance value is 0 while creating a geometrical tolerance, 0 is not expressed and appears as shown in the figure below.Why is this?
There are times, when in Annotation, the mini toolbar will appear, but pressing the buttons fails. Normally, when hovering over a button, text will pop up giving a description of what the button does. That does not even happen. Does anybody else have this issue? I wonder if I have something buried in my customization's that prevent it from working all of the time. Thanks Tom
I am using Creo Parametric Release 9.0 and Datecode9.0.2.0User is trying to access Sensitivity Analysis (Analysis -> Design Study -> Sensitivity Analysis) for part and the prompt "The option Behavioral_Modeler has not been acquired".I am wondering if this option tool is a toggle that I can turn on for the user or if this is an extension that would need to be purchased. If it is the initial, can you please guide me on how to turn it on for this user.PS. I have also tried following these articles for the user- https://statics.teams.cdn.office.net/evergreen-assets/safelinks/1/atp-safelinks.html- https://support.ptc.com/help/creo/creo_pma/r9.0/usascii/index.html#page/model_analysis/bemod/Example_Sensitivity_Analysis.html- https://support.ptc.com/help/creo/creo_pma/r8.0/usascii/index.html#page/model_analysis/bemod/To_Set_Behavioral_Modeling_Configuration_Options.html- https://support.ptc.com/help/creo/creo_pma/r8.0/usascii/index.html#page/model_analysis/bemod/About_Configuring_Behavio
Hi,I created a partial view with a colored zone. Picked my point and did my spline.Now I want the exact same partial view with a regular section black and white. Is there anyway I can copy the exact origin point and spline and apply it to my second partial view that I want to be the exact same?
This question was also asked about 3,5 years ago: Multiple-views-in-one-window At that time, the anwser was no. But is this possible nowadays? I want to show multiple views in MBD, just like you can show multiple drawing views on a drawing. Why? I don't want our users to search for the correct MBD view to get the dimension they are looking for. (Did the enigeer put this dimension in the front view? Or the section view? Or the top view?) If not, then MBD might not be very productive for us...
How to set a default developed length for all bends in a sheetmetal model to return to driven in Creo Parametric 8.0 ?
we need 6 Creo Parametric 7.0 licenses for the US. Request you to please provide the details ASAP.
Hello,I want to display a model parameter on an assembly drawing.I know that I can display the parameter by adding the note: &parameter.But because the model is an assembly I have to add a number behind it if I want to display a parameter of a model in the assembly structure. like: &parameter:<number>.How can I find out which number I have to use for which model in the assembly structure?(At this moment I am doing it with trail and error 😞 )
Hi all, I am very new CREO and have been exploring how to design PCBs in CREO. The Company that I work for requires to some work to be done in thermal analysis (Steady State and Transient Analysis) of PCB on CREO. I have tried to import files from KICAD. But when I try to import the .emp or .emn files all I get to see the PCB rectangle board. I have also tried creating a PCB on CREO but it doesnt come out correctly. So I require further assistance/tutorial/reading material: 1) How design a PCB on creo? 2) How to open files from other ECAD Software? 3) How to go about performing a thermal analysis. Especially for the Material and Boundary Conditions. What are the limitations of CREO and how to deal with error while importing the files? License Details: Basic. I understand my questions could be quite broad and would require more details, but it would great if I can find something to start of with as it more like a learning curve. Thank you so much
in smartassembly, I use a chinese parametic in code. Creo must crash after run the code
Hello everyone,Does anyone know which TOOLKIT or Object TOOLKIT function can be used to implement the copy geometry function? Thanks!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.