Recently active
As per the original post. Good Morning Ty, I'd like to use CREO to calculate the Area MOI of some non-uniform geometry. Prior to doing that I wanted to test the tool on a known Area MOI before applying it to the non-uniform geometry. What I did was took an I-beam, calculated the Area MOI and then pulled the same beam into CREO and tried to use the analysis tool to confirm that it shows me the Area Moment of Inertia in the Inertia Tensor. But the units for the Inertia tensor are for that of just plain MOI (lb/in^2) and not the Area Moment of Inertia (in^4) - how would I measure this using Creo for a cross section? Thanks, MW
Check out this video on Creo Additive MFG from PTC Application EngineersPresenters: Lino Tozzi (Solution Consultant, Fellow) and Ryan Butcher (Solution Consultant, Fellow)Original Date Presented: November 16, 2023To dive deeper into the subject, check out Creo Additive MFG.(view in My Videos)
I'm trying to relocate (move!) the datum tag from the hole to the note:Similar to this view:I'm using version 7.0.9.0Thanks In Advance (TIA)Merl
We just recently updated to CREO 10 (10.0.2.0) and found something interesting. when we save our models, some are being saved with the wrong owner. We were on CREO 6 and this didnt seem to be an issue at all. We have our file versions turned on. For example, we have a part named stud_end_locking.prt.82 with owner as "XXXXXXXX" saved on 5/18/2023. Today, user "YYYYYYYY" saved stud_end_locking.prt.83 and the owner is displaying as "ZZZZZZZZ"If I save an assembly with say 15 different parts, some of the new versions that save will have my user name as the owner and some will have other user names as the owner, even though that other owner hasn't even been in CREO parametric. today I saved a part and a new version was created with the owner of someone who left the company over 6 months ago.in the screenshot, i saved .82 and today i saved .83, but as you can see, the owner is not me. The owner of .83 is someone who left the company over 6 months
Community members... I'm making a cavity and every time I make the part it comes standard with "Units"=millimeter Newton Second (mmNs) AND Precision = Absolute 0.01. I would like to create a different measurement standard. As I am in Brazil, we use millimeters and the precision would like it to be Relative 0.0012. What configuration should I use? Thank you very much! Creo 10.0.3.0 Translated by the Community Moderation using Google Translate Membros da comunidade... Estou fazendo uma cavidade e toda vez que faço a peça ela vem padrão com "Unidades"=milímetro Newton Segundo (mmNs) E Precisão = Absoluto 0,01. Eu gostaria de criar um padrão de medição diferente. Como estou no Brasil, usamos milímetros e a precisão gostaria que fosse Relativa 0,0012. Qual configuração devo usar? Muito Obrigado! Creo 10,0.3.0
Hello - I am trying to apply a torsional load onto a shaft in Creo Simulation Live. I have tried several methods to apply a torque to the shaft. For simplicity, I made a 1" diameter shaft that is 2" long. I have one face fixed. I tried applying a 37 in-lb moment load to the the opposite face in the z direction which is the axis of the shaft. The XY shear stress that it returned with this method was extremely high. Calculating by hand the shear stress should be 188 psi in the shaft. I have the accuracy set to the maximum. I then tried applying a force of 74 lbf to a point on the bottom of the face of the shaft in the X direction in order to simulate an equivalent torque of 37 in-lbf. Please see screenshot. This resulted in a XY stress of 142 psi. This result was much closer to the hand calculation of 188 psi, but is still off by 25%. What is the best method to apply a torque to a shaft in CSL?
Greetings, I am interested in trying to utilize more of the functionality of Schematics rather than just creating wire diagrams.Ultimately I'd love to be able to create a BID, and then create a CID (using the info on the BID), then create a WID. Does anyone actively do this?Would you be willing to share your process? Thank you.
HiI created a curve from equation.x = sin(t) + 2 * Sin(2*t)y = cos(t) - 2 * cos(2*t)z = -sin(3*t)I tried Scale Model but it doesn't work on a curve from an equation. Is it possible to scale the curve without modifying the equations? Thanks
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 10.0.2.0 and Creo Elements Direct 20.6.1.02. What is the problem?Environments scanned with a 3D scanner cannot be loaded in Creo.3. Are you using a workaround? If yes, please describe it.No.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.To create custom made machines, walking platforms, piping in a production environment, the room is scanned with a 3D scanner. This gives a perfect lay out of the room and reduces errors of manual measurements.eg. A conveyor belt needs to go through a wall from one room to an other and has to drop the product into a machine. The hole in the wall is and the machine is already existing. So the room needs to be scanned and the conveyor belt will be drawn into the scanned model.5. What impact does this problem currently have on your or
how to figure out whether the javaAPP is running before StartJLinkApplication?I want to execute the task registered in javaApp.I use jlink to StartJLinkApplication ,but I dont know whether the app is running .If running will get error such asXToolkitInUseThen can not get the handle of JLinkApplication. Is there a way to get the handle app running? Can invoke the task in runed jlink application
Hello All, I have an issue in drawings where occasionally my drawing tree will completely disappear, and is replaced by a detail tree, which is blank, I try to activate and deactivate the window to no avail. The layer tree will now only show in the model tree lower window, where as it usually resides in the upper drawing tree window. If I restart CREO the problem goes away and the drawing tree is restored. I am curious if there is a glitch in the software or I'm inadvertently activating some kind of shortcut?
Creo should be able to directly open an embedded part such as PRT0002<<ASM0001>>.prt, without first having to go through its parent assembly.Ideally, I should be able to just run a BAT script containing a command like:"C:\Program Files\PTC\Creo 10.0.0.0\Parametric\bin\parametric.exe" "C:\models\PRT0002<<ASM0001>>.prt.1" 1. What product and version are you running?Creo Parametric 10.2. What is the problem?Currently, the embedded component cannot be opened directly via a BAT script or from another program.3. Are you using a workaround? If yes, please describe it.One can first open the assembly file, e.g.:C:\models\ASM0001.prt.1...and then in the feature tree in Creo, the user must manually find the right component, e.g.:PRT0002<<ASM0001>>.prt...and then right-click it and click "Open".4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.In our own software, we pr
All,Today when selecting a feature/geometry in ModelCheck report the geometry is highlighted.is it possible to change the behavior to perform "Select" ( so the feature will be selected rather than highlighted ) ?Many thanks,
When attempting to unbend or flatten the sheet metal, I encounter the error 'Feature failed to regenerate.' The part is quite intricate with numerous bends. Despite converting it to sheet metal and attempting both unbending and flattening, both efforts resulted in the 'Feature failed to regenerate' error. I am eager to have the part flattened, and I would appreciate any guidance on how to resolve this issue
We are using Creo Parametric Release 10.0 and Datecode10.0.0.0 How can we get the `ProMdl` handle of an embedded part (the part itself, not of the part occurrence) using the Pro/Toolkit API? I know that we can get the `ProMdl` handle of the part occurrence in the assembly via the assembly `ProMdl` --> `ProSolidFeatVisit` --> filter for `PRO_FEAT_COMPONENT` --> `ProAsmcompMdlGet`.But we need the `ProMdl` handle of the actual part, not of the occurrence - in order to inspect the geometry before assembly-level features were applied. For normal (non-embedded) parts, we would use:ProMdl mdl;ProError err = ProMdlFiletypeLoad(path, PRO_MDLFILE_UNUSED, PRO_B_FALSE, &mdl);This works fine for normal paths like "C:\models\PRT0001.prt.1", but for an embedded component's virtual path like "C:\models\PRT0002<<ASM0001>>.prt", it returns `PRO_TK_INVALID_NAME`. In the Creo Parametric UI, one can right-click the embedded part and click "Open" to see it in its
Is there any way to measure the thickness of a helical screw flight ?
Hi all,We have a BOM table set up that works fine (no duplicates) but when adding a column for the weight it brings back in the duplicates.I guess this is to show the weight of each part and each individual duplicate part.Is there a way to not show the duplicates and the weight column to show a weight for each part?eg. if there is two of Item 5, the Qty column would show '2' but the Weight column would show the weight for one of Item 5?Creo 8 Hope that makes sense.Thanks
Hello, I am designing a mechanism in which I want my Lead screw to rotate on its axis only. fixed to one housing so that the lead screw does not transverse, I want the nut to translate but avoid rotation I already tried the cylinder connection but it is not working for my problem And if anybody suggests providing a generic gear connection please also describe the reason behind it I am not able to understand the reason behind providing a gear connection I am using Creo Parametric
Hi,I use CREO Parametric 9.0 Student Eddition as a Hobbyist. When creating an STL file (Save as STL) for a 3D printer, I observe that the number of facets on circular srfaces is relatively low. My question is : How to increase the number of factets, in order to get more precise circular surfaces ? I foud this article in the CREO support, but it seems to be valid for another software : https://support.ptc.com/help/creo/ced_modeling/r20.5.0.0/fr/index.html#page/ced_modeling/OSDM_Main/Parts_23.html Is there a limitation of the Student Edition ? Thanks for your help
Reference topic link - https://community.ptc.com/t5/Analysis/Mechanism-connection-constraints/m-p/1405#M1430 Can you please give me reason why are you using the generic gear connection I am not getting proper reason behind it I would highly appreciate your help
Dear all, I Need solution to Remove "Part missing in directory" message by using creo toolkit program as shown in below image within creo toolkit features. and when program ends, I need to create log file for missing parts in directory.Case 1- if i have many parts, drawings in directory but for few drawings ,its linked parts are is not available in same directory then if i try to run my creo toolkit feature, it is showing "Part missing in directory" message multiple time for each and every missing parts as shown in below image. so it is creating interruption in run time.(example -if i have 10 parts missing for 10 drawings in directory then message will be populated for 10 times)Query - can we remove this message by using creo toolkit program as shown in below image while run time and when program ends can we make its log file for missing parts ?Condition - 1) Part name and drawing name may be same or different.2) one drawing can have multiple parts linked.Image -&n
Hi teamI am attempting to execute a Creo operation asynchronously. However, when I use the ProEngineerStart API call, it returns a PRO_TK_BAD_CONTEXT error. If anyone possesses knowledge of a viable solution, Kindly, please let me know. regardsAravind
If someone were to not have access to the WindChill batch tool, but still wanted to be able to manage and easily print out several single part drawings to a project, what other ways are there? I recently ran across a post where someone would create a top level drawing and was "overlaying" each individual part drawing inside that (1) file. However if that process can not be automated or batched, then its really no faster than opening each individual drawing and printing it. Just want to make sure I'm no missing anything. Thank You!
I have this Generic part (Fig. 1.1) for my Family Table. As you can see in Fig. 1.2, they're obviously in the Model Tree. Their columns show in the Family Table (Fig. 1.3) and when I verify (Fig. 1.4) they're successful. But even if everything shows that the features should show in the instances, they're still not showing (Fig. 1.5). It doesn't look like they were suppressed, more like the were never added to the model. I've tried to update the models in my workspace, and also upload them with tiny changes but nothing happens. I even tried not adding the features to the Family Table to see if they showed all of the patterns but no. Has anybody experienced this before? Am I missing something? Can this be solved by resetting Creo?I'm using Creo 7.0.10.0 but we're migrating to Creo 9 in a couple of days, could that be the issue? Thanks in advance! Fig. 1.1 - Generic Plate Fig. 1.2 - Model Tree showing the patterns Fig. 1.3 - Family Table showing the Colu
I have a user that is asking to have centerlines automatically break when passing through an item in the drawing. Is there a config option that will make this happen? I know you can manually break them in a few different ways but in this instance, we use 'Show and Erase' to create the centerlines.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.