Recently active
Hello PTC communityI am trying to solve a Topology optimization problem (CREO 10.0.9.0) for a rotating disc, but it is not converging properly. Here is a simplified version of the problem I am trying to solve. 1) starting geometry = full disc2) preserve geometries = Center and exterior portion of the disc3) Axis have a cylindrical support 4) Contact defined between shaft and disc5) Centrifugal force added in the center axis direction criteria below: 6) I tried mass reduction or stiffness and both did not converged correct7) I am defining symmetric distribution around axis and symmetric between central plane😎 material is defined with standard properties This is the result I am getting I tryied, axissymetric model as well (pie slice), it did not work as well.Any suggestions what I am doing wrong or how to set this problem properly?
Hello All, In Creo 7 when saving as a STEP, I was able to select the coordinate system in the window shown in the attachment but in Creo 10 the button stays greyed.Does anybody know why this is ?
Greetings Members As of this week (10/28/25) I am unable to obtain an Activation Key for Express Modeling. It was working fine the previous week. Here is a step by step description of what happens:- Click the CE Direct Express icon on my desktop- Obtain the following dialogue, this is normal or at least has been since direct access to the license server stopped working for me in Nov 2023. Each time I have to reactivate even though I have an account and have been using CE Direct Express for more than 2 years. Nothing has changed - same laptop, Win 10 OS, etc.- I enter my email address and password, select ‘Activate’ to get this dialogue, also normal.- In my case there is no proxy server, I am merely a PC on the internet. My internet connection is fast and reliable. I select the Submit button and obtain this dialogue:- At which point I select ‘Request activation key’. Normally I would receive an activation key in seconds, paste it into the M
If I try to Open Using Default Template for a result set, I immediately get an error message and then a fatal error. However, if I first launch Creo Simulate, and then use Open Result → Default Template, the same results open normally with no issues. P.S. i don't have any Z:\ drive
We are trying to develop a Creo Java Toolkit based application in synch mode (going by the recommendation from PTC) . We would like to use JavaFX for the UI .We see some old articles mentioning the issues related to using JavaFX in Creo Java Toolkit app and like to understand if there are folks who have used it successfully and any guidelines or recommendations to follow to do so.@Florent_Colab @GS_14113977
Hello!I have a frame design. I wish to get the reactions on the 4 points.I have as load the gravitation.The "Y" Reactions are ok. Way I get also reactions on "X" and on "Z"? In case that I have on corner "1" and "4" NO translation and on the corners "2" and "3" translation, by using of load by side, I will not have reaction in the corners "2" and "3". So ...this is the art to determinate the forces, but this is wrong be side load. So ..how to set the constrains correct?Thank you!
I am using Creo Schematics Release 12.0 and Datecode12.0.0.0I need to draw a functional diagram of a refrigeration system.Is Schematics the right PTC tool?Are there libraries dedicated to refrigeration components?Is there a tutorial dedicated to this type of system?
Is the "Multi-line Text" tool in Creo Schematics very tedious to use, or is it just my experience?I am trying to place a multi-line note, in the Multi-line Text user interface the note looks as I want it to appear on the field of the drawing. However, when I place the note, it adds spaces between lines. I've tried changing the settings in the Temporary Note Properties GUI, but even those settings are hard to understand what they do. Help please
Creo 10For non spec driven pipes, is there a way to change the color of the center curve after the pipe has been modeled? Where is the control for the curve color?
1:creo12不能检索pro_Library_dir所指定的库中的元件。这是creo12的一个BUG么?因为其它版本的creo是正常的。 2:能不能设置一个选项,可以让功能区按键提示“ALT”被释放出来,用于快捷键比如ALT+1,ALT+F等。功能区按键这个操作太繁琐,按键次数太多并不能起到“快捷”的作用。而且在使用这个功能时因为软件要加载出提示,还会让软件感觉卡顿。再者大多数人并不会用到这个功能,况且还有一个F10可以用来做这个事。为什么ALT与F10两个按键用来做同一个事情呢。还占用ALT这个使用率超高的按键。 建议设置一个选项让用户选择是否使用这个功能,选择不使用这个功能时ALT键可以用来设置快捷键。
I want to make a Bimetal Strip Temperature Displacement for my full mechanical project :mechanical solar tracker (dual-axis sun follower) brief description a purely mechanical solar tracker that uses clockwork and thermal expansion to keep a small solar panel or mirror sun-facing, without any electronics or sensors. working principle heating the bimetallic strip triggers a ratchet mechanism for hourly, incremental platform rotation. gravity then leverages a weighted escapement to fully reset the platform upon sunset.also any advice for my projectsThanks
I am using Creo Parametric Release 9.0 and Datecode9.0.8.0While running edit command, Creo window get freeze and can't change the numbers
Working on a decent sized harness with around 2 dozen connectors and have routed all of it in 3D with coord systems and networks. In the past with smaller harnesses I have been able to manually put in the number of pins in the components tab and then in the pins tab add in the entry port, regenerate the assembly, go back into the parameters and the PIN ID and Cable name have automatically been populated. (Not using Cero schematics anywhere all manually routed) Just as a quick test for this harness I picked a few connectors to make sure everything was working and followed the same process above and the pin ID came in but the cable name did not. My question would be why is the cable name not coming in? My first guess would be that i need to fill out the entry port column for every single connector ( with that then do I need to do that for every port or just one per connector?). My other guess would be I am missing a step somewhere in there and something is not connecting correc
Has this been tested with Creo? Thanks
A user recently got a new computer with Creo 11.0.3.0. They noticed that their "shortcut" to Pro/Library was missing on left hand side of the Creo Browser underneath Common Folders. We looked into their config.pro and saw no issues. The pro_library_dir was even defined as it is on all other users' computers also running Creo 11.0.3.0. I even changed the setting on the config.sup file on their computer and that failed to make the Pro/Library shortcut show up. Has anyone else ran across this issue and what steps would you take to make the shortcut show up?Below is a picture of how it shows on my Creo Browser.
I am using Creo Parametric Release 10.0 and Datecode10.0.7.0I have a user asking about defining a default simplified representation in a non-assembly model, is there a default simplified representation in non-assembly models? I have not been able to find default simplified representations in anything but assembly models.
Hello,I would like to have an assembly file which contains a box and many of a same part. Like a box full of bolts. Is there way to assemble those parts in not a particular manner but rather in a random way? An example picture is shared.Thank you.
I am ready to engrave some words on a surface using extrude function. The code list below, but seems the specified font did not work. I checked the feature created by this function, the font is still font3D. How can I use other font? double height = 10.0;pfcPoint2D_ptr firstCorner = wfcCreatePoint2D(-25.00, -25.00);double length = 48.764;pfcPoint2D_ptr secondCorner = wfcCreatePoint2D(-25.00 + length, -25.00 + height); wfcSectionEntityText_ptr text = wfcSectionEntityText::Create(firstCorner,secondCorner,content); text->SetFontName("cgomg"); // use font cgomgwfcSectionEntity_ptr textEntity = wfcSectionEntity::cast(text); sketch->AddEntity(textEntity); sketch->SetIntentManagerMode(true);sketch->SetIntentManagerMode(false); /* Redefining the feature */extruFeat->RedefineFeature(0, extractedTree, featOpts, regenInstr);
PTC says this can't be done, so I'm appealing to a higher authority. Put simply, I want to use repeat region relations to compare a parameter in each member to the number of the drawing. PTC Tech Support says there isn't any way to reference information about the drawing from within the repeat region, but that sounds like a terrible gap in functionality, is it really true?
PTC community,Is there an auto save option in creo? After a certain time or key strokes. My pro-manufacturing guys were wondering so I thought I'd look into it. I thought maybe a config option.Please help me out.
Hello ptc When trying to activate Modeling Express 6.0, to get my 72 hour key I am getting the following error in my browser "Internal server Error code 500". As a side note, I have been having to do the 72 hour key for a couple of years now as I get a Proxy Configuration-Connection Failed error for automatic activation. This has not been a big deal as the 72 hour key is a bit of an annoyance but not that big of a deal. Please see attached screenshots.
Hello,I am a senior year student in university, aiming to implement my previous work experience using Creo Parametric/Schematics to generate electrical wire harnesses for our Formula SAE team. This way we will better know items and wire lengths needed to make our yearly wire harness for competition, both IC and EV. I personally love Creo and hope to help future members learn this program since it's seemingly necessary to work in some high level industries.With only a university free account, trying to prove that Creo is more than useful for our efforts my previous experience is somewhat mitigated for reference. I am hoping to maybe learn of some alternative means to generate the parametric intelligent wire generation. Also is colored cabling disabled for a free account? I've attached an image of my default parameterized spool below, adjusting the name to lowercase as per some support ticket entries I read prior but to no avail. For one person on our team hoping to join a spe
Requested Improvement: There should be some visual indication in the model that the dimensions have been altered using the Analysis -> Dimension Boundaries tool (referenced as Dim Bounds in help). An analysis feature in the model tree would be helpful, (This would also be helpful for turning on and off the analysis, or having different analysis scenarios)Also highlighting of the alerted surfaces would also be helpful. One color for more material another for less material. Or, one color for upper boundary, and another for lower boundary.Environment: Tested in Creo 10.0.8.0. Problem: When the Dimension Boundaries feature is used and active, there is currently no indication in the model tree. The risk is that an analysis could easily be left active in a production model. Manufacturing could manufacture to the model expecting the model to match shown dimension values. The end result is that bad parts could be made due
Currently we have the following relation in our startpartMATERIAL = MATERIAL_PARAM("CONDITION")This arranges that the parameter MATERIAL is filled with value of the material parameter CONDITION. This parameter MATERIAL is shown in the BOM.As with Creo 7 there is the multi-body added. In this situation it is possible to use multiple materials in one part. When this is the case there is a parameter PTC_REPORTED_MATERIAL created which contains the name (I think it's also the condition name) of the used materials separated by a ",", see below. I thought I update the relation in our startpart (template) but it is not possible to use the relationMATERIAL = PTC_REPORTED_MATERIAL It then shows the error "Invalid symbol ' PTC_REPORTED_MATERIAL ' found.". Somebody a solution?
I attempted to upgrade from CREO Parametric 11.0.4.0 to 11.0.6.0 this morning. When I go to start 11.0.6.0, it fails to start because it cannot find a .psf file. The only "reconfigure.exe" file I can find is in the C:\Program Files\PTC\FLEXnet Admin License Server\bin folder, which merely shows me the available license server. I cannot uninstall under Windows either. Is there a way to salvage this installation or manually uninstall and start over? Any help will be greatly appreciated.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.