Recently active
Introduce the surface offset functionality inside the freestyle feature.Today you must confirm a freestyle feature before offset a surface and add a new subsequent style feature to merge them in an unique quilt.
Hi,I hope it will be Enhanced,when you put the mouse pointer on the saved orientations (Back Left etc.) as the picture shown.I hope the pre-selection orientation will be turn to the correct orientation.that will be helpful.Thanks!
Version files are great but the version numbers recognised as the file extension does cause plenty of software conflicts.How about putting the version number before the file extension.Also a config option to turn off version creation could be useful in non critical projects.Cheers, Sean
Currently you cannot define a decimal scale beyond 3 decimal places. Typically this only impacts with fractions such as 1/16 which turns into .62Creo seems to resolve this value correctly but not showing the full value leaves room for question/error. Is it rounded? is it actual? Using fractional scaling seems to provide an ok work around for page scaling,but view scaling is still subject to decimal scale being displayed in the settings box. (shown for example only, we do not actually use a 3/128 scale)See also http://communities.ptc.com/ideas/4703, for adding architectural scaling.
Not all formats use a decimal, fractional, or ratio scale.Some of our drawing formats use an architectural scale for large scale structures.Example would be 1" = 1'This can be worked around today, but it would be beneficial if it were an out of the box option.
In Creo Elements/Direct Modeling Version 19.0 it is possible to export a file in STEP format using the granite processor.Unfortunately, it is not possible to do this in Creo Elements/Direct 3D Access.This should be made possible.
It is currently impossible to creating "Composite Curves" and "Datum Curve from Points" through Datum Curve element tree. Please add these to Toolkit functionality. From Creo 2 Toolkit documentation (M100): "Some other curve types, including Thru Points, From File, and Use Xsec do not currently use element trees in Creo Parametric, and are therefore not accessible via Creo Parametric TOOLKIT."
Dimensions are difficult to read when editing parts, especially in large assemblies. The dimension gets lost in all the geometry. Add an option to modify the font size/type inside Creo. I do not want to change my windows settings and affect all my other programs.
There is a way to include reference geometry in the ProMechModel by calling ProMechmodeldataEntitiesSet(). This will then allow the user to query the ProMechModel for datum points,curves, etc.This request is to allow the user to incorporate the reference geometry as real geometry, in the ProMechModel. For instance:Instead of a ProMechPoint, a Datum point would become a ProMechVertex, and it would interact with the other ProMech Geometry appropriately (for instance, if the Datum point was located on an edge, then in the ProMechModel the edge would be split into two edges, with the Datum point becoming a ProMechVertex connected to these edges. If the Datum point was on a face, it would become an embedded ProMechVertex in the face.Instead of a ProMechCompositeCurve, a Datum curve would become a ProMechEdge.
When creating a flushed hem flange, obround, rectangular, and stretch bend reliefs are not available. The tab is active like they should be, but an info message is provided that only rip reliefs will be created. Add the capability of using these bend reliefs with flushed flanges.
When a coordinate system is added to a view on a drawing, it may be that one of the axes in a view is perpendicular to that view. In that case, it should be possible to hide that axis and axis label so that it doesn't clutter up the view by having unnecessary information.
The information PTC provides from here http://www.ptc.com/WCMS/files/135225/en/creo2_hw_notes.pdf is extremely valuable. To enhance this more it would be great if PTC would provide the direct link to these drivers.I located this on a DASSUALT site http://www.3ds.com/support/certified-hardware/ and if you select Lenovo you will get a very concise list of Certified drivers to download. http://media.3ds.com/support/certified_hardware/Windows_7_64-bit.html#LeNovoAt our company we are supporting somewhere close to 30 different configurations of graphic cards. So having a concise list of "Legacy" drivers is very handy when a machine needs a rebuild. If the legacy driver is not available the latest will get install and usually will require downgrading to the Legacy driver if you can locate it anywhere.Locating the newer systems drivers is easier than located a Legacy driver. So if PTC could maintain this information for archive history. All customers could benefit.Nvidia provides a location t
The integration kit is slightly updated in modeling 18.1, but there is nothing in there for windchill 10.2 only for model manager. It would be great to have some commands to work with windchill 10.2.
Hi! We have a problem with "Drawing area" in the Toolkit 2.0.In a non resizable grid cell "Drawing area" control with right and left attachments is surprisingly able to change its size.Suggested, but not acceptable, solutions:R&D suggested to set minimum size of the component with DrawingMinWidth and DrawingMinHeight. These options are not exposed as TK APIs, we can only define them within a resource file. But in our plugin to initialize all dialogs we use only APIs calls, so, this don't give us a lot.Second solution is to disable right and left attachments for "Drawing area". We can't afford it. We strongly need left and right attachments, without it, we loose all structure of our dialog.There is a case and SPR for this issue.Can you, please, fix that in a future release?
Add ability to mirror both curves and surfaces, as well as set their dependence on the original set. Currently, only curves may be mirrored within style tool. Surfaces may have surface edits, making recreation from mirrored curves laborious. Recreating all patches from mirrored boundary curves can be very time consuming. There are workflow work-arounds, but none are as quick as a "mirror [curves and surfaces] -> make [subset / complete set] independent -> modify" workflow.
Introduce the ability to merge elements of two or more Style features into one style feature.This allows features created independently, perhaps in different files, to be combined into one feature.Allows for efficient curve and surface boundary condition assignments.
Add ability to save without exiting Style Currently, one must exit style to save progress. Sometimes links must be repaired before Creo allows exiting the feature, which may be a lengthy process. The state of the feature should simply remain frozen while allowing a prompt save of the entire document.
Ability to toggle model tree item visibility: The model tree is currently visible, but one must exit style to toggle visibility. This limitation exists with various other Creo tools. Style curves which are set to a hidden state do not remain in a hidden state when exiting the Style feature.
Create an option to select end point -> Right Click -> Link to -> [list of linkable objects in the neighborhood of the pointer, perhaps categorized by curve,vertex,edge,surface] Currently, one must click an end point, drag – hunt for graphics-sensitive edge features until the desired feature is highlighted. Often times the pointer must be moved a large distance away before the desired curve,vertex,edge becomes a selectable option. This operation is very slow, especially with graphics at high settings (often, high curve and surface settings are required) When constraining to a curve intersection, it becomes unclear which vertex is being selected for linking, this affects subsequent continuity constraint options such as tangent, curvature, etc.
Introduce a view state that toggles visibility of all Style curve boundary conditions simultaneously. Currently one must activate a curve to see its end point conditions, cycling through each curve at an intersection to find a “master curve” This method can save troubleshooting time for failed surface connections which depend on curve connectivity or continuity. This may be applicable to general Creo 3d curves.
it should be possilble to deactivate the labels generated by machining features individually. machining labels can often be anoying, certainly when used in a pattern. therefor you have to put labels OFF, but then all labels are deactivated like 3D annotations.
Please make it possible to configure Creo to follow ISO 129 in relation to dimensions with values higher than 1000.The thousand separator must be a blank space character acc. to this picture from ISO 129.
One of the first slides in any analysis report I generate is an image of what the mesh looks like. It would be helpful to be able to show the mesh with the original CAD colors so it is easier to disingish parts.
in Annotation, when i chose a view profile it is not possible afterwards to see which view profile has been chosen. it would be usefull that in the view properties the chosen view profile would be displayed.
I would like the WF4 & earlier functionality returned for detailing a drawing. I have drawings with over 50 unique dimensions, and only being able to erase dimensions individually is a huge time-waster and increases my chance for error. I had a couple of features representing maybe 10 of the perhaps 70 dimensions on my drawing. Going all the way back to release 20 if I remember correctly, I was able to click the buttons for dims, centerlines, notes, etc, then erase all the items relating to a particular feature. (feature, feature and view, view, all, part, part and view...) I could also show or erase items for dims, ref dims, geom tols, notes, balooons, centerlines, weld notes, surface finish, datums, etc. all at the same time.In my case now, I have a drawing rep that doesn't have a couple of features, but the part drawing is made with it and the dimensions for those hidden features still display on the drawing. Now I need to individually figure
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.