Recently active
Hi, Is there any option or workaround to export all figures into single PDF file? For example, i have combination of Figures, Some 3D Figures and many 2D Figures.All i want is to combine all figures in single PDF file. In publishing option it combines all pages in single file, but in .pvz file and can be viewed through Creo View only. My concern is same i want it in PDF file extension. Please help me out if any workaround is there. Regards,Jignesh.
I imported an assembly and now the components are "fixed" but I want to move a sub-group of them to another location. Doing "edit definition" I can move a single component using the dragger. But I have several (hundred) to move so doing so one by one isn't appealing. I guess I can restructure the ones I need to move into a sub-assembly, then move the subassembly with the dragger, and then restructure out into the parent again, but seems tedious. I found this menu under component operations: and the transform tool looks like it takes me through all the steps needed to make this move (simple translate along the principal coordinate axis) - yet nothing happens... Am I missing a step? Or is there another better way to do this?
Is there an option to export the exploded views from a model to a 3D PDF?
I am using Creo Parametric Release 6.0 and Datecode6.0.3.0I want to load the fastener library in Creo 6.0.3.0.
When using Creo 4.0, if I am working on a drawing and want to open the part file for that drawing that resides in the same directory, I thought Creo would look in the same directory as the drawing file that I have open. Now it seems like I automatically go back to the working directory. Is my memory defective or is there something I changed in the Config file that is causing this?
Hi,We change our view projections and toggle from 1rd angle projection (Europe) to 3rd angle projection (US).To avoid mistakes, (of course symbol in Title block is changed) we want to add the name of the projected view under each drawing view.The config option: make_proj_view_notes = YES , do it automatically.But: the view name is the default name, and the system write the view name twice as shown in picture.It seems not possible to define the option to write a view name only one time, but always twice "view_name-view_name"Users need to manually correct it.Did someone use that option "make_proj_view_notes = YES" and how do you manage that please?Thanks.(Creo Element Pro Wildfire 5.0)
In the assembly after enabling the Show popup view from the model tree settings, While hovering the mouse cursor on any of the components in the model tree Creo shows the thumbnail of the part. Which shows the message (Click the image for a 3d view) Earlier updates of the Creo like in Version 7 after clicking on the image will get the 3d lightweight preview in the mini windows which is a useful feature for many customers. Now we are unable to get a 3d lightweight preview of the component geometry in Creo 9.
I have an assembly with over 1000 components, and I must read the entire structure (all level sub-assemblies and parts). But then, during the read, the Creo runs generate at every level. The overall structure read goes beyond 15 minutes. And there are cases I have to parse Assemblies beyond 1000 components, which makes it impractical to use the custom program. Is there a way to disable generate programmatically during the assembly read? Example: subComponents = currentComponent.ListFeaturesByType (False, &n
I am using Pro/ENGINEER and Creo Elements/Pro Release 19.0 and Datecode98440In the 3D drawing area of Creo4.0, how to create a symbol at the position clicked by ProMousePickGet ------------------------------------------------------------------------------------------------- Translated the text from Chinese to English using google translate on 7-April-2023 at 10:42am IST. Translated by vnamboodheriTitle & Body 在Creo4.0的3D绘图区,如何在ProMousePickGet点击的位置创建一个符号-------------------------------------------------------------------------------------------------
I have a question related to projection views, usually we can project side views from parent view and place along the projected axis (move freely along the projected direction). Is there any ways to limit the movement of projected views, like i don't want projected view move opposite direction to the projected direction and placed other side of the main view. This will make wrong angle of projection.
Hi!I am working on a school project where we are using surface modeling to create a hair dryer suitable for injection molding (We are and have to work in Creo 4.0, just fyi). I decided to go for a more advanced modeling method where I make a boundary blend towards a projection on a complex "pane"/surface (as can be seen in image below). I use a ribbon as a tangent for the boundary blend, I create the ribbon with sketches and curves. The splines in the sketches are tangent to a horizontal center line, while the curves are tangent to axis that are perpendicular to the vertical plane. I do the same for the for the handle (see below).I then merge and thicken this. I use the top-down approach to make the back half referencing the relevant points of the front half. Lastly to my point and my issue, the thicken (even tough all boundary blends uses tangency to ribbons that where created with sketches and curves that are constrained in such a manner that they are perpendicular to the vertic
I am using Creo Schematics Release 7.0 and Datecode7.0.0.0(.dge) I get the following error message when I try to open the data'Internal Error (005) occurred. Use the Check Database tool and contact technical support for assistance.'Here are the errors that I faced'Internal Error (005) occurred. Use the Check Database tool and contact technical support for assistance.'
I'd like to make a parameter have more than one value. I know this would only cause problems for most applications and may not be possible. Here's what I tried doing and how it failed:CALLED_FROM = "2" AND CALLED_FROM = "3"errorExtra symbols found - ignored.CALLED_FROM = ["2", "3"]errorRelation has an error.
I want to create a curve from datum points. To do this, I have imported the datum points offset as a table and created the curve that way. Now I want to automate this process so that I can re-import the points every time I need them and update the curve automatically. Is it possible to import the points table using PRO/Program?
Morning all.At my place of work we are running Creo 8.We are still in the early days of setting it up correctly.I want to save the config.pro file on the network so that all our users accounts point to same same location so that we all use the same configs - at the moment they are on peoples C drives. I cant seem to find a way to do this.Can anyone advise please? Thanks.
Can I make a duplicate of a part and have it in the sbom? Example assembly didn't contain allscrews so I need to add one..
I am using Creo Parametric Release 4.0 and DatecodeM100When opening a .stp file from a trusted source, I get a fatal error with a traceback log and then Creo closes.Here are the errors that I facedFatal error encountered. A traceback has been written to C:\PTC_User_Data\michael.baumgarten\traceback.logPlease send it to Technical Support.
Hello everyone, I need a small information from your side. As i am performing modal analysis for my structure. My geometry is very simple made up of granite material. I would like to describe my problem in points, that would be easy to unterstand, 1. Firstly, i did the static analysis of my structure, where the outcome was acceptable. I mean to say the deformation (0.00155mm) and the stress (1.004Mpa) were under the limit. 2. Then i performed the modal analysis of my structure with same constraint and load collector, where i have selected 6 eigen mode. After the analysis I got the E1 (507.741Hz) to E6 (1358.87Hz) value. 3. Can someone explain me how to read the modal analysis results, because at each eigen value the results getting changed. Also, should I consider the deformation and the stress value from the modal analysis? Because compare to the static analysis their values are very high. I would appreciate if anyone have a look on this concern. Thanks S
Hello,I have two question about creating views in Creo Illustrate.1.) Is it possible to create a kind of interrupted or collapsed view (or what I shou call it) to push large parts together (example: View1 and View2)?2.) Is it possible to display only a part of a view, so that it is still possible to place position numbers (callouts) on the left and right (example: View3 and View4)? Thanks and greetingsRamon Bean
How to merge reference BOM Balloons in Creo
Possibility to change units of flow value. Example: to have pressure in MPa and not in Pa
Hi, I'm trying to create a sheet metal part like this from 2mm stainless steel, but I'm having problem with the last step which is unbending the part. I get the troubleshoot message: "highlighted sharp corners cannot be unbent. Recommended actions: Change the corresponding bend radius to a value greater than zero. If bend is not defined, add an edge bend." I've searched for this problem in the forum but cant find anything similar. I've tried the following.- checked that the sketches have tangent between lines and curves to not have sharp edges- radius is same in the two sketches to have a consistent bend radius- experimented with using thinner material, different radii of the bends and the circular part and the corner part. longer straight lines in the circular sketch, etc. - tried creating the part in another way by creating a swept blend surface in part modeling and then offsetting the part in sheetmetal. - tried using
in the attached pics you can find the drawing done on another software using for loop, how to implement that on Creo, and is that possible to do using for loop in the parametric drawings?I need to draw this marker on each slot and it should be all the time upward (circle with a line getting from with 90 degrees wrt x-axis) as shown in the pics any help or tips would be so appreciated
I have a few instances in my code where I have a UI tree that is longer than the height of the screen and I want to scroll to a specific position.One example is when i select a tree node using ProUITreeSelectednamesSet (or otk equivalent) I want the scroll position to be set so that the selected node is visible without needing to scroll down manually and search for the highlighted node.Another example is setting the scroll position to the top after a node is added because the default seems to be to scroll to the bottom of the tree.
I have this callout that appears out in space. I need to relocate it but dragging the leader does nothing. I've deleted the callout and added it again but it always ends up way out. How do I fix this?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.