Recently active
Since the introduction of Creo Parametric, the 'simple sweep' feature has been removed and instead,the Variable Section Sweep should be used.With the simple sweep feature, the sketches for trajectory and profile were 'embedded' and even datum pointsand datum planes were embedded resulting in only 1 feature.This one feature could be patterned with 'variable' or sometimes 'identical' option.We use the simple sweep (cut) for large hole patterns.If we would use Creo parametric and the Var Sec Sweep command to create these holes, it wouldalways result in a Group and a group pattern always behaves as 'General'.Conclusion: we cannot upgrade to Creo Parametric because some of our hole patterns can be a FACTOR 20 slower
When we do the pattern if reference pattern is available, automatically select reference pattern. However let say I have part which was assemble by 3 plane method. Amond the three planes, two planes are also have some pattern. Now the reference pattern select the first plane reference for reference pattern. We need some option to alter this.Regards,Jayanta Sarkar
Modelcheck can delete relation with ModelUpdate enabled, but this not work for Modelcheck Batch in order to do this action in a mass list of model.It is enough to enable this functionality to Modelcheck Batch.Plase do it in a later build of Creo 2 or in Creo 3.Thank you
Currently if an assembly has multiple instances of same sub-assembly and if we hide/unhide one compenent in one instance then all components in all instances of this sub-assembly will be hidden. We need a functionality to hide/unhide just specific comonent of a sub-assembly but not all those in all sub-assembly instances. NX/SolidWorks/CATIA all have such functionality.
This is more of an enhancement that an idea.To be able to make a swept flange shape along a chained edge, when the planar shape is irregular, and has an angle or two greater than 145° .Currently, you can't sweep a flange along an edge with an irregular / non symmetrical shape. You can, however, get the flange when you shell the part from a solid, but not with a swept flange.
We create a layer HIDDEN_DIMS to put dimensions on that we don't want displayed in the drawing. A rule is used to put dimensions with zero value on this layer. There currently is no way to identify if a dimension is a baseline dim or not. We do not want baseline dimensions on this layer because they do need to be displayed. We hide this layer in the drawing. Currently must manually exclude each baseline dimension from this layer. We use re-use our models for different molds over & over. Relations help us make reuse of the models so from one mold to the next I don't know if a dimension should be displayed on the drawing or not. That's where the rules come into play. A more expanded rule set can help us reduce the work required for drawing cleanup.Please help users use the software more productively.
The mass value is wrong calculated if you change the simplified representation of a single part (for example: switching chamfer of a part on/off).
I suggest to add Outlined only / Filled only / Both Outlined and Filled options to TEXT STYLE in Creo Parametric DRAWINGS (Notes, Dimensions, etc), especially when using True Type Fonts.Fill should also have customizable transparency, color or color gradient and Outline thickness should also customizable.
M_UNDO or M_REDO breaks an active command for example an active DELETE command.The broken command must be selected again.ME10 ("PTC Creo Elements/Direct Drafting") should be changed that the active command keeps active.ZURÜCK oder WIEDERHOLEN unterbricht einen aktiven Befehl zum Beispiel den LÖSCHEN-Befehl.Der unterbrochene Befehl muss komplett neu angewählt werden.ME10 ("PTC Creo Elements/Direct Drafting") sollte so geändert werden, dass ein aktiver Befehl aktiv bleibt.
In ProSolidMassPropertyGet, there is an option to get the mass properties for a solid relative to a desired CSYS. The function takes a CSYS by desired name, however it only works relative to that solid (there is no support for gathering the mass properties of a component in an assembly). In Creo 2, the Analysis-> Model Report -> Mass Properties tool performs the calculation based on a selection to a CSYS. This difference is important because Toolkit lacks the capability to calculate all massprops of a component relative to a desired CSYS that could potentially live inside of some component path. Please either change the function to use a ProSelection (or at an Asmcomppath and a Modelitem/ProCSYS individually), or create a new function to be able to gather the mass properties of a component in an assembly. Another alternative would be to add "PRO_MASS_FILE" to ProOutputFileWrite, to generate the same report as is generated using Mass Properties -> Display Info, wh
Currently you can have broken views or detail views, but you can't combine them.Can we enable broken detail views? Or detailed broken views?I'll include an example below, where we want to show close-up views of a component with overall dimensions.The current workaround is a broken view with horizonal and vertical breaks, and a hidden section beyond the drawing border!Thanks
Structure Browser => Settings => AppearIt should be possible to define a font and font size for the items in the structure browser.
If you create chamfer around your part you only have the default setting for the corner transition mode.To change the transition mode you have to select each corner one by one and select a different transition mode outof a pulldown menue:There are different Ideas for an optimisation:A config.pro option to pre define the favorite option for corner transition if possible the favorite transition will be usedif not possible the transition is set to default (like it is right now)An option (e.g. checkbox) inside the dashboard to decide that all chamfers from this feature should get the selected transition modePossibility to collect all corners and change the transition of all selected cornters at the same time (only selection of all corners and 1 x 3 clicks)
I used to like the new functionality of holes "lightweight on/off".I expected performance advantage in large assemblies.Maybe it does, but as they appear as a curve and they also do that at the drawing, i can't use this functionality like this.I'm dreaming of an rule based simp rep changing all holes to lightweight and vice versaPlease make the "convert to lightweight" and "convert to solid" available for simplified representations.
Please create a ProNotify element to support feature rename. There is currently support for a model rename through PRO_MDL_RENAME_PRE and PRO_MDL_RENAME_POST, however no equivalent function exists for features. Update 2015-04-06: Include modification of names of orientations and combined states in the listener.
A Toolkit application or Object Toolkit application could benefit from being able to read from the trail file during or after a Creo session.One possibility that comes to mind is to read more detailed error descriptions for problems for which the API just returns the general PRO_TK_GENERAL_ERROR.For example trying to open a DRW with missing dependencies or opening a file created by an educational version of Creo in a commercial version of Creo.In both cases PRO_TK_GENERAL_ERROR is returned, but an application cannot tell the difference between the two error cases.This is particularly relevant when running Creo in hidden batch mode.The name of the Creo trail file is "trail.txt.[n]". Request: provide an API to get hold of the current trail file name. Other users interested in this functionality:Pro/Toolkit access to audit trail informationhttp://communities.ptc.com/message/12917#12917
When you have multiple loop in sketch, it would be great if you can select all the loop in one time like in the picture. Now, I have to click on each squares (in that case 5 times, imagine if there is hundreds of square !Link to the case : https://support.ptc.com/appserver/cs/view/case_solution.jsp?n=CS187614&lang=en
Section lines can sometimes be placed above existing centerlines. adjustment or deletion of centerlines is a wish that customers exists Also the possibility of cleaning up views when centerlines overlap is asked for.
When using the thickness analysis tool it would be very helpful if you could change the traspaency of a colour. This would then allow you to see into a model and view features that would otherwise be obscured by the solid colours that are used at the moment.The only real way of viewing internal features at the moment is with cross sections.
Suggestion for improvementCreo function „save a copy“ in the sheet metal environmentWe have several customers that work with sheetmetal and they requested that “save a copy” should also consider the variant (unfold). At the moment only the assemblies, generics and drawigs are collected, so they have to do this in Windchill. As most of the engineers are more CAD centric they would prefer the same behavior from the CAD application.Best Regards,
When detailing assemblies, bulk items are often used for thread lock, lubrication, tape, etc. We also use bulk items for fabric, thread, foam chemicals, etc.Many times I need a balloon for a bulk item in several places. A fabric cover will have an assembly to represent it in models with bulk items used to populate the BOM table. The drawing will have a pattern on it were each panel needs to have a balloon to indicate what material it is made of. Currently I have to use balloon notes that are not parametric and do not update with changes to the BOM table.
PTC Case C12193267\53347:Can a hole in Annotation (calculated geometry) be automatically 'Quarter' hatched to make the hole stand out? We can achieve this manually, but it is not feasible for many holes, & does not dynamically update if hole changed\moved.
We often need to select various entities like points, curves, axis...--> it should be great to have more choices in the 3D Filter selection: datum points, axis, curves.....& the possibility to do a window selection (like a window zoom) as we can do when we add objets in a layer.
when chaning the colour / line style of a table, it is only possible the select the whole table to change the colour. would like to have the possibility to change the colour / line type of a single line, single cell, single column, single row.
when placing or editing a view, in a 2D drawing, you should have the possibility to select a layer state which is creating in the 3D model. this isn't possible yet. example: I have created a layer state called engravements. this layer state conatins some curves which a placed in the layer "curves". So I don't want to select all the curves in the layer "curves" but a selection of it. so that selection is shown in the layer state engravements. In the 2D drawing it isn't possible to select a layer state when placing or editing a view. The possibility to create a seperate layer called engravement isn't allowed due to policy.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.