Recently active
Additional APIs would be useful for exporting geometry from CreoView Java Toolkit. There are API for save annotations, structure or image but not for the geometry export.
Would like illustrate to be able to understand the mechanism setup in Creo. This would help cut time spent in illustrate creating the same type of movement but with less control.
1) Allow single click exiting of CreoView by either method: a) Allow option to close CreoView window without warning about navigating away from page (Giving a warning would still be useful in the specific cases where there are unsaved changes) b) Allowing to Add "Exit CreoView" to Quick Access toolbar -->Either method would reduce 3 click and 1 mouse motion to just a single click saving design time and avoiding user annoyances. 2) Tabs for QUICKLY and EASILY viewing multiple CreoView windows at a time in CreoView. (or simply removing the limitation that only one CreoView window can be open at a time).
Description of Issue: Submitted Case#11105564. We were told there is no solution and we must submit an Idea request. The file extensions (*.prn, *.pra, *.gl, and *.hp) were viewable in past versions of ProductView. We are currently running ProductView 8.0 M040 and want to upgrade to Creo View 2.0. However, these file types are displaying the following error..."The given input file is not supported by Creo View. Refer to Creo View Clients and Toolkits Software Matrix on PTC.com for the supported versions or files." Workaround Solution: This is the only workaround solution we've found... Download the file from our PLM system Change the file extension to .hpgl Open file in Creo View This solution can be cumbersome to the end user as some objects in our PLM system have dozens of files checked in to the object. The user would have to download all of the files and go through each one and change the file extension in order to view it in Creo View. Proposed Soluti
I would like to use function follows on my own application. - Setction - Measure - Annotation - Interference - Animation So, I hope to open API's about these function.
This idea is for a request to add Creo View Bill of Material Output based on selected components. The current options are "pick assembly" or "entire structure". My picture shows the functionality I'm looking for which is to box select the geometry on the screen(in my case, the two tires) and then generate the Bill of Material based on the selection. Ideally, I'd like for the parent assemblies to also be included for "Hierarchical" output. The bottom part of the picture is showing the output Bill of Material of 35 pages which includes all the suspension components along with many other truck components in session. The output of this Bill of Material could be included in a Windchill Search which could then be added to a Workspace for modifications. Ultimately, I'd like to recreate the assembly structure and position of only the selected components for loading in Creo Parametric. Pick assembly has it's limitations as you can only pick one
The attached image shows two areas of the interface that don't provide the user with warnings when selected. This idea would provide a safety net for users with a message stating what is being removed prior to the loss of data and work. Why? See below examples: 1)For annotation sets - I intended to delete one image but the software deleted 10 annotation sets. This may have been due to a bug in the software or more than likely, I had all the annotations highlighted and didn't notice when I hit delete button. But either way, there was no warning that all 10 were going to be deleted. 2) The remove from group selection is located conveniently between two very common functions: "Select All" followed up by "Select in Product Structure". The selection for remove from group has been accidentally hit multiple times and it is very frustrating that there is no warning. I'd really like for the menu to be rearranged where this option is further down away
Enable the display of geometry datums contained in native Creo files in Creo View Express
I was hoping there would be support on Windchill Mobile and Creo View Mobile to open 2D representations, but at this point I cannot figure out a solution. I am trying to view Drawings on my iPad to further implement this so all of the factory workers can quickly pull up a digital, 2D representation on the shop floor versus the paper drawings we have now. I have both the Creo View App and the Windchill Mobile app, and I am able to open all of our 3D representations (Parts and Assemblies), but I can't figure out why we cannot open Drawings or pull PDF's through Windchill to the iPad. On the DEMO system of Windchill Mobile, that comes pre-loaded when you download the app, there is a PDF file right on the front page. The DEMO system allows you to open the PDF and look at the viewable right from the App. If I access our system, the drawing (all of these are represented, .pvz, .pdf, .drw) I cannot view anything 2D. Why does the source code of the A
When you have an assembly with some hidden components, the Creo View model that is creaetd preserves the visibility so all the components would be published but those that were hidden would be off by default when the model is opened in Creo View. However, the thumbnail that is created does not preserve the visibility of the components and all the components are shown in the thumbnail. That means the thumbnail could potentially look completely different than the original cad assembly and Creo View assembly which doesn't make sense. Suggest to only have the visible components added when creating the thumbnail.
Currently we cannot see scalar values of stress/displacement when reviewing an .OL file (created from Creo Simulate run) in Creo View 2.0. Only the 3D stress contour model and legend are shown. Add function to extract values of stress, displacement, or other resultants so non-CAE engineers can review the simulate model in 3D and get a better overall picture of the design.
This is an enhancement request to be able to control the default "Show Boundaries" setting in CreoView. This is found under the /Sectioning tab, /Show Boundaries. By default, the option is turned on. This means that each combined view will display the boundary of the sectioning plane along with an oversized dot in one of the corners that represents the viewing direction. Our users find this very annoying and have to turn it off each time. We would like to be able to control this option with a setting that can be applied to the current and subsequent CreoView sessions.
Using Creo View 2.0 M030. Today, you can create combined views in Creo and then publish them to Creo View. Once in Creo View, you can adjust how they look by tweaking things like Render Mode (shaded, wireframe, etc.) and Filters (datum curves, planar annotations, etc.). But, once you're done tweaking and want to print those views using "Print Multiple Items," those settings are not maintained. The prints will revert to the as-published state. In other words, what you see in the active Creo View window is not what is printed. This enhancement request is to add the option to the "Print Multiple Items" command to maintain all those tweaks and apply them to the views before printing.
We're on Creo 2 M100. Would like to be able to create combined views and maintain the layer state definitions when publishing to Creo View. Today, the layer states are ignored. There is a work-around to create a layer for each combined view, add the items to display, then isolate the layer. Not ideal. Expecting Creo View to publish WYSIWYG by supporting all the Creo functionality.
Hello! We and our customers are using Windchill Service Information Manager/Arbortext Publishing Engine to publish so-called intelligent graphics (PVZ for example). The publishing process will create an HTML-file with the graphics in it (linked, of course). Howver, this can only be viewed at the moment on a PC, because: The support of intelligent graphics requires an activex-plugin (CreoView Express), which can only be used on a PC with IE/Firefox/Chrome. So we're stuck here, since we and our customers have no chance to use those great features on a tablet, Android, iOS-device, etc. We would require either platform neutral plugin, which works on all devices, all OS's and all browsers or html5 compatible creo view format, which can be viewed in any HTML5 compatible browser. Thank you, your WindchillTeam@DATACOPY
Now with Creo View 3.0, the animation can play by Creo Web Toolkit(StartAnimation, StopAnimation, ....). But Creo View Office Toolkit can't play the animation. suggest Creo View Office Toolkit can play the animation too. Many customers hope better introduce the product with PowerPoint. If Creo View Office Toolkit can play the animation, that's a great Improvement!
I have a big structure and I divided that structure in different subdirectories linked to main assembly. When I open that structure it can't open as it is not in the sae directory. and If I put all files in the same directory it will be a miss to me. For that I suggest to add options file in Creo view as Creo parametric as and add features as "Search path" as
In Creo view, we can see the coordinates by using "Makrup _ summary" feature. The shown coordinates just show the number like that (200, 400, 300). I want to see what is 'x' , 'y' and 'z'. So, I want to see like that (x200, y400, z300). Please accept my idea.
For the latest Creo View 3.0 CANNOT open Creo Elements/Direct Modeling/Drafting native files, have to save as to PVZ file. Since Creo Elements/Direct Modeling/Drafting native files can be opened directly by Creo Parametric, I think PTC has technique to enable Creo Elements/Direct Modeling/Drafting native files too.
In Creoview screen, we can select part and it can be seen transparent or opaque by 'local display style'. We want to one more function need that is 'wirefram'. The designer usually use viewing data for reference. To see the part assembly, 'wireframe' is very useful so, please add 'wireframe' in local displaly style.
I want make axis or coordinate anywhere I want. For example (0, 0, 0), when I open the file, I don't know where is start point and axis. As you know the viewing data is came from CATIA data. The data should have start axis and point. Creoview menu "filter" show the all of the axis in the data, but this is so complex to see and inconvience. This inconvience maybe solved by the function. so please consider it as thing necessary to make axis or coordinate anywhere.
The 3D Connexion properties window pops up every time the user performs certain function in Creo View such as RMB on a component > Open in new window. Please fix this behavior so the window does not pop up. Here is the discussion on the 3D Connexion forum: http://www.3dconnexion.com/forum/viewtopic.php?f=25&t=4710 PTC Tech Support case number: C11917936
The Creo View Express 3.0 does not show Simplified reps created in Subassemblies. That results in limited functionality of View Express. We would like the People on site to view the Operation sequences. Those sequences have been created as simplified reps. The current View Express dose not recognise simplified reps that have been created in subassemblies. So unless the View Express recognise those, we at Mc Connell Dowell can not use View Express 3.0. since it shows only the simplified reps created in top assembly. Regards Christoph Hess
When we add annotations to 2D drawings in creoview we should point the toolbar after every line or shape. Why not improve it like adding annotations to pdf files.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.