Recently active
Today I can set the setting to 0, which allows full use of the hard disk as cache.Furthermore, you can set the cache to a fixed size in megabytes. As an extension of this setting, we would like to be able to set negative values.This should result in the maximum size of the cache equal to "size of the hard disk" minus the value of the config.pro setting. This would make it easy to ensure that a minimum of disk space would always remain free, regardless of the hard drives used. Today we have the problem that some computers have 256 GB and some 512 GB hard disks installed.If you want to prevent caches from becoming corrupted due to a full hard disk, the value of the setting dm_cache_limit must be limited to 261120 MB (= 255 GB).But the computers with 512 GB hard disks would allow much larger caches.
When a new illustration is created is not possible to change the setted "standard". Then if I need to customize some callout, symbol, explode lines in an old illustration I need to redo it now. It is not acceptable for us. Thanks
Create a config.pro option to enable the user to set the default selection for the smart filter in Creo Parametric 5. For assemblies, the current default is "geometry" but setting it to "part" would be more useful to me.
Hello, Sometimes, after defining a Combined state with 3D annotations in Creo Parametric, when exporting the assembly to pvz and opening the viewable in Creo View, the combined view opens in a different orientation (translated in Creo View compared to whats defined in Creo Parametric😞 The user opening the same combined view inside PVZ can think its empty or in best case need to translate the combined state to have a correct display ! Can you please Correct this behavior : an orientation defined in Creo Parametric for a combined state should be always exactly the same when reopened in Creo View ! Associated PTC Case : C14627537 Thanks in advance
PTC Creo should implement conversion, compatibility or even method switching in terms of Bend Allowance calculation and table. Both Creo Parametric and Creo Elements Direct Modeling Sheetmetal Shop should be 100% compatible to each other and to bending machines terminals. Today Creo Elements Direct Modeling Sheetmetal shop is, while Creo Parametric is not.”
Bend Allowance calculation and bend table should support or even convert both, Bend Deduction and Developed Length.
PTC is reducing the functionality of Creo Parametric in the name of "meet(ing) dimensioning standards". One example of this is the removal of the user's ability to rotate ordinate dimensions. However, they are ignoring the fact that a lot of "drawings" that are created are never intended to meet dimensioning standards. Layouts, flat patterns, templates and most importantly presentations.It would be great if PTC would allow both a standards locked mode and a free mode in order to facilitate all uses of the drawing module.I opened a case with tech support and the tech went the extra mile and submitted an SPR for an enhancement to add a config.pro option to enable this. Maybe we'll see it in Creo 4.PTC, allow designers to use Creo the way they need to, not just the way you prescribe.
Creo Schematic crosshatching should be improved to where the overall feel should be similar to existing crosshatching performed in drafting programs and minimize the number of clicks to perform the actions. The following statements are based on my experience in Creo Schematics 2.0 M020: Closed geometry should pre-highlight for selection When you go to create a crosshatch the closed geometry does not pre-highlight. Single click to select closed geometry You have to double click the closed geometry to create the crosshatch, this should be a single click. Ability to click anywhere on the crosshatch You cannot always click anywhere on the crosshatch, it appears as those the selection area is within a certain distance of the closed geometry inside and outside the shape, and sometimes in the middle. Right-Click modification of crosshatch To modify the crosshatch you cannot select, right-click, properties (the option is greyed out). To modify the crosshatch you
It is difficult to place dimensions, texts and symbols in annotation. They automatically jump to some predetermined spot. This is just a big pain. Snapping should be able to be temporarily disabled by pressing the shift key or something similar. This would allow the user to line place symbols, texts and dimensions in a neat pattern.
Creo Elements Direct text editor should have a spell check function added to it , just like the option found in this Create Product Idea dialog. Something a person can click to start even, does not have to be automatic.
Model Manager should be improved so that it also fully supports CED Drafting. As it is today, users of CED Drafting and CED Modeling have both the Drawing Manager and Model Manager running simultaneously with a high risk of conflict. To run two programs instead of only one also means loss of performance that makes no sense.
In WGM for Creo E/D Drafting, we need it to show a warning message if a user cannot obtain any response from Windchill server within a certain amount of time. This request might be CoCreate specific. WWGM does not come out of the hang until the command is completed from CoCreate Drafting( END or Esc key from keyboard). Windchill 10.2 M010 Creo E/D Drafting 18.1 M050
Currently HTTPS is not supported with the version 10 adobe livecycle changes for the office worker. If base Windchill supports https, all areas should also support https including the down stream translation and publishing processes. This should be in alignment for all components.
Issue description Fill styles are not showing in watermarks. Watermark text does not work as needed, if you select hatching the text still shows up as normal when opened in Creo View. Not possible to read (printed out) dims when watermark is over dim. Issue picture: This issue wasn't available in ProductView 9.0 Standard.
I want to export user defined database attributes to Creo View MCAD Lite. Attributes are limited by the function and it is inconvenient now.
there is an open opportunity for the proffesional version of Productview. As I understand the Productview version is able to save/export into STL. That's the reason for customers buying this product in the past. Since Creo Elements/Pro 5 an import into ProductView wasn't impossible and the customer had to have invest in CreoView professional. Which means additonal costs for the new product and the maintenance cost. The good thing was that the customer now ware able again to open the data from ProductView Standard 9.0 CreoView Professional. Unfortunately after initial purchase of productview for export to STL update to CreoView Profeessional customers aren't able to save as STL. This option is fully missing in CreoView and degraded the product under the function level of ProductView. It doesn't argue the 2 times additional costs for the new product and the mainenace without a solution in getting back the former functionality. For the customers it mean
Would like the ability of Creo View to permanently watermark the PVZ viewables. This can either be embedding the current displayed watermark when the File -> Save As function is executed in the client or the ability to define a permanent watermark that is separate from the other watermarks (e.g. Copyright or Proprietary, ITAR notices) Current functionality allows for watermarking the display in the client. When a PVZ is loaded it will show the appropriate watermark that is stored on the server side or client side preference. If a user then saves the PVZ to the hard drive and opens in a stand-a-lone client, the watermark will not be shown. Use Case: User wants to save a PVZ to the hard drive to email to a customer or supplier. Once that PVZ is opened outside of the Windchill environment want the watermark to persist.
One of the key messages in Creo is: any data But it is not possible to view native data from Creo Elements / Direct. Creo View is now in version 2.0. Creo View should work as in the key message posted: any data It´s a little bit crazy, because it is possible to read native data from Creo Elements / Direct in Creo Parametric but not in Creo View.
Currently ProE/Parametric have "use_software_linefonts" config.pro option to force WYSIWYG plotting of linestyles into hardcopy. The linestyle you use in the ProE feature or drawing will be the linestyle you see on the hardcopy. Unfortunately, there's nothing similar for the "Export" function, meaning that neither PDF nor PVZ can reproduce the linestyle used inside of ProE. CAD users can choose from many different linestyles, but this information is lost during the conversion to PDF/PVZ. We wanted to migrate from AutoCAD to ProE for manufacturing overlay design, but are struggling to do that without WYSIWYG PDF output. For PDF, I'm using the old fashioned workaround of dedicating a specific drawing color to a specific linestyle, and then hard-coding the dashing through a pentable assignment that matches my needs for the one specific linestyle. This approach is extremely inflexible and limited. It requires consistent upfront training of users t
Currently, only one Creo View version can be installed at a time on a client PC. Installing a second automatically "upgrades" the previous, removing it. This makes testing of new datecodes very difficult, requiring multiple pieces of hardware, VM environments, or constant uninstall/reinstall of the client app. I'm currently supporting users on a production-deployed client version, but also need to move to one of 3 more-current versions. How do I evaluate each of these, while still supporting my current "production" version? This option needs to be available via "silent install" and include a provision for controlling which version is spawned by Windchill (WC preference, client environment or registry setting, etc.).
That would be so use full to see our CAD through a smartphone or tablet.
Need to make publishing a drawing or model that contains cosmetic sketches (features) work. Currently we use cosmetic sketches to make labels or tags for products. When these models are published or opened in ISOdraw they do not appear. When we try to create documentation using these illustrations or perform design reviews with Creo View. The tags/labels are blank.
when someone saves a annotation set in creo view i would be nice to be able to see this annotation set in Creo Parametric it should set a icon in the workspace where you have the part/asm/drw listed maybe like this then you could open the part in Creo an correct the issues it would ease the colaboration between departments, and save time in developing new products
ODEBRECHT is an Construction company with thousand of projects in the world and is looking to improve and optimize its use of CREO VIEW on the best way as possible. Recently got a demo from Bentley using LiveScribe Pen (http://www.livescribe.com/pt/ ) to get markup and notes directly on top of a CAD/2D visualization and it was very nice looking to do on the same way that our Engineers like to work on daily bases. So, we´d like to suggest to PTC incorporate this facility on CREO VIEW as soon as possible, since ODEBRECHT is looking to define Windchill PDMLink and Creo View as its corporate interface around cAD data.
Hello PTC, there is no possibilty to load a color palette into Creo View. Each color has to be added manuelly by defining color values. A function to import a color palette is necesaary!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.