Recently active
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.6.02. What is the problem?The ECAD IDX PCB Place restriction Keep out only allows a digit value in depth setting (height). It is very time consuming to design and update many small keep outs for each airgap to the offsetting surroundings.3. Are you using a workaround? If yes, please describe it.Very time consuming to design and update many small keep outs with individual Depth value4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.MCAD drive and design the surroundings of a PBA and using Keep out features is a way to share the geometry with the ECAD Layout designer. My idea is to offset a surface-quilt from the surrounding diecast metal cavities, use as an inheritance skeleton surface into the PCB, and use the surface to cr
In using Creo Illustrate with PTC Creo View Files Tools for publishing, The "PVZ" output file doesn't allow watermarks to be published. We have Windchill / model security labels "ATTRIBUTES/PARAMETERS" that don't publish. I created our watermarks ini files using the old "ProductView Watermark Editor", The ini files work for Creo View and Creo Illustrate independently. The only impact is generating a Creo Illustrate generated pvz the watermarks are not visible in our files. We would like the watermarks to be published using our output of Creo Illustrate. We have our Windchill lifecycle designs, security labels that we would like to preserve on our Figures and screen sequences .
I have a complicated surface modelled part (over 1000 features) with a family table. When I open one of the instances, it immediately shows regeneration failures, but when I manually regenerate it again, it usually fixes itself. Why would these failures be occurring if there is nothing wrong with the part since it completes the regeneration manually?
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?10.0.3.02. What is the problem?When creating for example a load in Creo Simulate, but also applicable anywhere, I often refer to a parameter instead of typing the number. When forgetting the exact name, I need to go back out and fint the parameter name. It would be more efficient if one would have a small icon next to the value field, as in the image, that is a dropdown to all parameters that can be selected.Alternatively, or as well, when starting to type a parameter name, it will show the available options, similar to a search field.3. Are you using a workaround? If yes, please describe it.Copy paste or try to remember.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Improve efficiency5. What impact does this problem currently have on your organization? (Number of users affected
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.7.0 2. What is the problem? Reference: Ticket #: 17094880 SPR#: 14927971 Article: 404190 We imported a baseline PCB into an ECAD assembly. This was a flex PCB that needed to get bent, so we added bends to get the routing needed. We are able to successfully show the flattened state and all components regenerate fine. HOWEVER, if we redefine a component and press OK (without making any changes), the component can no longer update properly when toggling between the flat and bent states! All we did was press OK!3. Are you using a workaround? If yes, please describe it.We are using two assemblies, a flat state and a bent state. This can introduce discrepancies and issues between the two assemblies, and a lot of extra work when trying to collaborate between the ECAD and MCAD teams.4. What is the use case for your organization? Describe ho
Hi!I want to reduce the number of Creo 8 licenses either in the license file itself, on the Flexnet-server. or somehow elseHow do I do that immediately?(Flexnet Release Version: 11.17.1.0) I don't want to have suggestions like "Cancel them". For Windchill I can just allocate a smaller number as I understand it.For Creo: I login to PTC, go to Support - License Management, License Actions, Advanced Search, put the server host ID, click Search and see the licenses that I can retrieve.But there is no option to put in a smaller number. Thanks!
I'm creating a very simple part, a strip of metal with holes in it. I started with a flat part, added the 1st hole, then pattern. When bending, the holes move with the part, but when I want to reference other parts to these holes in an assembly that's not possible. I've tried bending first and doing the pattern with a curve pattern. In this case the parts show in position but the pattern has an error. I'm sure it's because the two faces of the bend become different. Tried adding points and same issue. I had to repeat holes and chamfers twice and will have to do the same with the parts attached to this. Is there any way to keep the references after bending or is something that Creo doesn't have?*I'm using Creo 9.0.2.0
I am using Creo Parametric Release 4.0 and DatecodeM080The colour coding of the model changes after regeneration.Here are the errors that I facedNo warnings or messages.
Hello,is it possible to zoom 3D views more than 400%?I have a large screen, and with small image dimensions (e.g. 7.5x4cm) the rest of the screen area remains unused. And for certain orientations, zooming in further would help me. Thanks and best regardsRamon
I am using Creo Parametric Release 4.0 and DatecodeM130 CREO opens the model and the mouse aperture keeps spinning: error dbg_err_crashO - continuing from serious error (ORDER_DEBUG) Here are the errors that I facedError dbg_err_crashO - continuing from serious error (ORDER_DEBUG) Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- I am using Creo Parametric Release 4.0 and DatecodeM130CREO打开模型鼠标光圈一直转圈:报错dbg_err_crashO - continuing from serious error (ORDER_DEBUG)Here are the errors that I faced报错dbg_err_crashO - continuing from serious error (ORDER_DEBUG)
This is a supplement to: Article - CS129684 Is it possible to measure distances and other spatial quantities in results window in Creo Simulate. Complex measurements and comparisons to original CAD are possible through some additional steps. In simulate results, set the deformed scale to 1.0 and then export the model to VRML format Change back to Cad side and open the VRML file. This can then be assembled to your master and compared or measurement tools used. Some additional planes, sketches, or 3d curves referencing the VRML vertices may be needed to measure a diameter. This is because the deformed model will no longer have perfect arcs, cylinders, and spheres like the original CAD and so some form of approximation is needed.
I have tried 2 methods:1.Componenet - Restructure。 2.Select Part,Right click,move to new assmbly However, I did not find the corresponding API for this functionality in PROTOOLKIT.
All,I have done a bit of searching but have not found an answer. Aside from a manual operation to exclude an item from a 2D repeat region, is there a filter that can be applied to a repeat BOM region that excludes a model that is set as "include" in the assembly? ThanksBrett
Hi,In a sketch, I draw a first datum centerline. Then I want to draw another centerline at a certain distance from the first centerline. My problem is that when creating the second centerline, CREO seems to select the nearest geometry edge to specify a distance. How to specify the first centerline as the reference for the second centerline ?Thank you for any help
I work with 3 different clients all using the same version of CREO would there be any way when opening CREO select client and save the cache in a specific folder? today I use this way. ENV=PTC_WF_ROOT=D:\Cache\%USERNAME%\PTC\ProENGINEER\Wildfire\.wf
Is there any ways to check which simplified representation i have applied to my BOM table
Hello,how to set and make default complementary angle when creating flat pattern view?Software version: Creo Parametric 6.0.5.1 Thanks in advanced!
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?10.0.3.02. What is the problem?When analyzing the data from the Creo simulate result files of an analysis the format of the output files needs to be corrected. For example in the .res or .f01 files. When I have several measures, more than 5, the result files have a carriage return/new line in them after 5 datapoints. This makes it manually intensive to correct the format before I can continue analyzing the data in for example Excel.This is not new for Creo 10 and has been an unfortunate "heritage" for many years.3. Are you using a workaround? If yes, please describe it.I open the file in Notepad and manually remove the new line on every row before copying the data for analysis.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.It would make it possible to simply copy/paste the data
Hello, While saving the assembly I generally receive this error "Object has failed feature", which does not allow me to save the assembly unless I suppress the part. When I check in the part I see no error. What could be the main issue and how to resolve it?
Hi, I only have access to Creo View Express. I need line drawings, but when I try to print to pdf from HLR, the lines on the printed pdf are very weak. Any suggestions on how to improve the line weight or other parameters that would work? Thanks and best, Eva
Hello every one, sorry for a stupid question but could please anybody here give me a hint or a link to download the installation file for Unix version of Creo View Express? All I was able to find were CVE Adapters for Unix, which we were unable to run on Linux. Or does anybody know how to run CVE on Unix correctly? Thank you all!
In my job I have to draw some pieces that are similar to others. GD&T is very important so we use as reference a similar part to take those tolerances into account and to know what to annotate and what not to. Is there a way to make an automatic drawing or a drawing of a part using the similar part as reference, automatically? Even though I have to adjust some details it will save me a bunch of time.
command in windows :dir /b /s /a:d > folders.txt This command will output a text file with all the recursive folders found in the current path where the command runs. it will create a file with all the sub directories recursively found in the starting path, and will write this out to folders.txt. This can be used and renamed to search paths file. It will save you a lot of time for having to create this file manually.
In my company I have to draw some pieces that are similar to others. GD&T is very important so we use as reference a similar part to take those tolerances into account and to know what to annotate and what not to. Is there a way to make an automatic drawing or a drawing of a part using the similar part as reference, automatically? Even though I have to adjust some details it will save me a bunch of time.
I had to format a computer, logos after configuring CREO this option that follows print is no longer enabled, before formatting the machine was normal, and same license and everything.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.