Recently active
We use ModelCheck and GateKeeper to maintain a level of control over models being used in Creo and Windchill and verify CAD standards.Today in Creo 2 and 3 you cannot directly run ModelCheck on bulk items. All items should be able to be ModelChecked.
Creo Parametric does not allow more than 31 characters for its filename (prt, asm) now.I want to use much more characters because I want to add some information like a project name, a person name, updated date and so on.So I want PTC to support more than 31 characters for the filename in Creo.Thanks,
There is a requirement from the Business to have an option in Creo Parametric which can generate the X,Y and Z (Length,Width, Height)values of the model from the Bounding Box. Many users will use this for packaging studies. Please have this option in Creo Parametric 6.0.3.0 version
whilst busy working on fairly complicated model and using in-context modelling. CREO is good enough to inform you when you have mistakenly created a circular reference but gives no idea as to where it is. it may only be 1 constraint that is causing it. it would be great and very time saving if CREO could, as well point out the circular ref , point to the feature or constraint that is cause it. this could be done with the yellow triangle in the tree and a note in the info area.
Currently, if you want to see the milling area, it's necessary to play path trajectory, display tool kerf, analyze toolpath and go back to edit definition mode.Idea: Add possibility to display "Tool Kerf" (trace of tool along toolpath) in Edit Definition Mode of Pro/NC sequences without playing toolpath.
In trajectory milling : it's possible to specify an axis in "Plunge" tool motion.It's impossible to specify an axis in "Retract" tool motion.
International companies would have a benefit, if the language of the user interface could be changed during a running session.
Model Check could be very useful but its setting is very hard, not user friendly. It has not upgraded since Wildfire 2, I think.
It should be very useful to have in the 3D RMB (floating) menu the option "Through All Symmetric"
In release Creo Elements/Direct Modeling 20.2 the "Load and Position Dialog" got enhanced to raise productivity. All native Modeling and Model Manager use can benefit from this, because the setting in the file open dialog is honored. Sadly, this productivity enhancement is not available for all the Windchill Users working with the WGM, because the WGM is not honoring this setting in all Creo Elements/Direct Modeling 3D load commands. I would see a huge benefit to enhance all the Creo Elements/Direct Modeling Windchill load commands to honor this setting and directly jump with the chosen part to this dialog, like Model manager does it. Any Feedback by the community is appreciated. What do you all think? BR Thomas
hello,to manage the sheetmetal drawing with a Template, I use simplified rep to have in first folio the bend part, and in folio 2 the unbend part.but with this configuration, I must use the simplified representation in an assemby. to do that, I place the part, replace it by the ben simplified rep, and assemble it.It would be usefull to be able to modify a default simp rep excluding the flat feature to manage by default the bend part, and have a "unbend rep simp" used in the drawing.
Indeed, our use case is to perform a Widnchill classified search for Catalog components (eg WTparts in Libraries classified with PartLinks), and once the WTpart is found, browse its related 3D model and bring into the active assembly in one operation by drag and drop instead of doing many steps such ascopy the cad model filename in Windchill page the go in Creo assembly, create assemble feature, and in the Open Model window paste the file nameopen in Creo with right click and then assemble from objects in sessions (provided you can remember which object among the hundreds of objects in memory you have previously selected)add to WS and then assemble from objects in WS (provided you can remember which object among the hundreds of objects in WS you have previously selected)Unfortunately we have found no way for such a drag and drop in the standard PTC Windchill and Creo Parametric integration.As of now, the most efficient seems to copy and paste the file name, but it is not welcome by use
we have many model variants with different connection contours, that we put into the model by inheritance. If these contours differ so much, that it makes no sense to put it in a family table, it would be useful, when we were able to replace the reference model by a "replacement" assembly (Sorry, I don't know the English name of this AAX feature)
The old "Turbo Pattern" process of creating a surface, solidifying it, then patterning that has been consolidated into what is now called "Geometry Patterns". Unfortunately this is only available in solid modeling, not the sheet metal module. The fact is that sheet metal perforation for EMI and airflow for thermals is a common design in many fields.The fact that you can't create vent holes in sheet metal with the geometry pattern process is a huge miss. It also shows the inconsistency within Creo between modules. Please enable the ability to create geometry patterns in sheet metal parts similar to how it is done in solid mode.
Now, this is going to be controversial because "it's always been like that", and I can see that suddenly reversing the behaviour could confuse established users.But... how many times have you done Save As (sorry, Save A Copy) then proceeded to start carving up the model - before realising that you're changing the old model, not the copy you've just created?If reversing the behaviour is a bad idea, how about either introducing Save As in addition to Save A Copy; or adding a dialogue box to ask which file you want to keep open?Similarly, Backup shouldn't leave you working in the backup copy IMO - if I'm creating a backup it's because I want to keep a record of where I was, not start changing it.
For example: 1.Select edge, can chamfer and copy by RMB 2.Select surface, can offset, thickness, trim, merge and copy by RMB
Allow the creation of a Datum Plane in the middle of two surfaces or two planes.(Midplane Parallel, midplane between faces, midangle - Solidworks has this nice functionality…)
Currently, all legacy Mate/Align interface constraints are always reversed in Creo Parametric.This causes the user to have to flip them every time they are used.To work around this, companies are forced to modify hundreds of thousands of files, changing the mate/align interfaces to the new coincident/offset ones, or users are required to make tens of thousands of extra operations flipping everything. Additionally, there is no differentiation between coincident constraints, so there is no way to tell which "coincident" applies to what feature.PTC, please fix the new coincident/offset constraints so that legacy mate/align interfaces still work.
It would be great to be able to use the model tree research with parameter displayed in column like we can do with the component name The research should ask in which column it must look
When modifying a component in an assembly context, I RMB, Activate the component. If I then click the Show Datum Planes icon, for example, all the datum planes throughout the whole assembly, that are not on a hidden layer, show up. It would be more convenient if only the datum features within the Activated part were shown.Ideally, this behaviour would be controlled using a config option, so that external datum references could be selected when using Top-Down Design, for example.This should apply to all kinds of datum features, including Points, Axes, CSYS and any others you can think of.If this is already the case in CP2, I promise I am working on the upgrade!Still on WF4, here, M220, where is not the case, as far as I know.Please vote up if you think it would help.Yes, I do know about controlling datum features using rule-based layers.This would just make things easier and therefore better.In summary, then, the idea is:Add a Config Option to switch the Datum Features that are shown in
INHERITANCE FEATURE FOR ASSEMBLY SAME AS INHERITANCE FEATURE FOR PARTS. POSSIBILITY TO SUPPRESS PARTS & TO CHANGE ASSEMBLIES DIMENSIONS.We need this functionnality to decline assemblies wich contains differents parts (because of different grooves) but should be dependent to a master. Today we a doing family tables. CREO BOM should list the component of the Inheritance feature (components of the source assembly that have not been suppress by the user). WTPart of the Inheritance assembly should be created and managed. Careful with the WTPart of the source assembly: should not be affect by internal modifications of the inheritance feature. (we use multi-owner links)
If I'm working in widget.prt (or thingy.asm) and I create a new drawing, the name of the drawing should default to widget.drw (or thingy.drw), instead of drw0001.drw.This would save a lot of people a little bit of time several times a day, for little programming effort.
Well, according to this document, the ability to control the visibility of annotations by layer was removed in Creo 1.0, Parametric. It is now recommend to use "Combined View States" instead.This is fine if you're doing model based definitions, but it's a cumbersome substitute if you just need to see a note on screen occasionally.We need a simple, on demand method of controlling the display of annotations in the 3D model. Layers worked well for this, that functionality should be restored.
selection filter does not expand to be able to select specific feature required. e.g. edge/surface etc. to attach note leader.
The symbol sketcher tools are not even up to 1980's CAD functionality. It's like PTC started to develop the tool then just quit.Please update the symbol sketcher to include:Crossed Centerlines - For holes, cutouts, etc. Currently users have to draw at least 6 elements, divide them, trim them, remove segments, then delete construction geometry for every hole centerline drawn.Dimensions - really?! Still no dimensions available? Spending hours drawing dimension leaders and arrows is not productive PTC.Sticky preferences - Why do we have to set the preferences every time we enter the symbol sketcher? I can't understand why horizontal and vertical snapping is not on by default.Robust grouping tools - Move details between groups, copy elements from one group to another or to all, maybe a graphical group tree.Add more in the comments.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.