Recently active
Its interesting to Creo Illustrate users have some option to activate ENTER key as OK for dialog box and or selection.
I wonder if it is possible to leave some columns pre-defined in the Item List area. For example: By default, the columns that are displayed are (Sort Order | ITM | Item Tag | QTD). "Attached Image (Default)". By customizing, I would like the default columns that appear every time I open Creo Illustrate 4.0 were, for example, the ones shown in the custom "attached" image.
To improve CREO Illustrate and CAD integration, must be important to have compatibility with instance models created with Family table.
The configurations Creo Illustrate 3.1 it's better than configurations Creo Illustrate 4.0. In Creo Illustrate 3.1, the user will configure and save. In Creo Illustrate 4.0, the user will configure, export and import, ever of the necessary. This procced is very slow.
When creating an illustration, and using section view of the model, capping the section does not affect to the SVG export in any way. Creo Illustrate needs to cap the section when exporting to SVG as well. The lines behind the capped geometry are visible in the SVG export, but not in the illustration. Attached are the capped section.png which shows what is the illustration setup, and SVG export (svg_export.svg) that has been done from the illustration.
Creo View owns the feature to show the part names generated with different attributes. e.g. using the synchronized WTPart number and the name from Windchill. Creo still doesn't own this feature! These part names should be available in all dialogs and not just in the structure navigator. So if you search in the open dialog, it should also find those parts. Get rid of this old school filename!!! Everybody talks about generated numbers and classify it with attributes. Just Creo doesn't support it.
We are using a Z-Space monitor with Creo View Stereo mode to view 3D models. The problem is that stereo mode is currently only available in the default model view, and does not work with any Creo View Web API. This means that when product view is loaded from the HTML file, stereo mode can only be selected when the creo view window is loaded in GUI mode, and the load viewable API call is unavailable.We would like to load specific viewables in the creo view window (non-gui mode), control those viewables with the API (load viewable, OnViewableLoaded, HasAnimation, StartAnimation, and StopAnimation) and to be able to toggle stereo mode via a JavaScript function (API needed).
It would be great if, when exited, Creo View would remember the annotation set though it wouldn't have necessarily been saved or loaded into Windchill. This idea is originally for the models being displayed in the current view, but could apply to other items. My thoughts are that this could be captured in the Creo View Cache, or in the user profile, and would be considered based on the "Recent Files" list. If Creo View recognizes a file in the top ten, or some variable, then it would ask the user if the previous view should be restored. This behavior would be similar to Creo after an unexpected exit in which it asks if you want to restore your session. Many other software companies do this based on a crash. The benefit is that if you have a large model in session, then you do not have to go through the structure to show the same models. Another thought is that this could be captured based on the size of the structure loaded. Either way
Hello community, In addition to the currently supported entities for Creo Elements/Direct Modeling to export to the Creo View format it would be great to have the support for at least the planar section like it it is possible in Creo Parametric. If X-Section would be supported it would be great. How do you all see this? Thomas
As of Creo View 4.0 F000 you don't seem to be able to scroll using the mouse wheel in the left or bottom menu bars. The Viewables, Annotation Sets, Structure and Model views do not scroll with the scroll wheel, only manually by clicking on the scroll bar. Same with the attributes list in the bottom window. The option menu also doesn't allow use of scrolling. The screen is smart enough not to scroll the primary view when you hover over those menu bars, but not to allow them to scroll.
With Positioning Assemblies there is the ability to use the visualization of the lower level components within the assembly. The problem is figuring out if everything is published for large assemblies. If you open up your assembly and the top icon has the check and green dot in the model view, you know it's fully loaded and available. However, if you get this icon, the assembly is not fully loaded. Which is great, but this includes items which don't show by default: Skeletons - These sometimes can be shown but are hidden by default. It still changes the icon to say not all items are shown. Bulk Items -which can't be shown Included items - which can't be shown As well as actual items missing a published viewable, or are not pulling the file due to errors It makes it really difficult to find what's missing and what's not shown. Now we have implemented publish.positioningassembly.publishchildren which helps TREMENDOUSLY, but I still am unsure how deep this checks
IMHO, all companies producing products used in the building construction industry will eventually have an interest in supporting BIM (Buidling Information Modeling). Another idea was proposed for exporting from Creo Parametric however Creo View is not mentioned. Perhaps the IFC file doesn't require the high fidelity model exported from Creo Parametric? Thingworx Studio uses a lightweight (low fidelity) model created with Creo View technology. I would like to see Creo View supporting the IFC export for low fidelity models.
Today Creo View uses the external Adobe Acrobat or other PDF viewer software. We have had countless issues with this interface. IT updates Acrobat, and sometimes it fails, sometimes it doesn't. Someone has Full Acrobat and Reader and it causes issues. Someone tries to install Creo View with short term Elevated Privileges, and it only installs Creo View, not the Adobe Acrobat Adapter. So when they eventually open a PDF, they can't install the adapter. I get 1-5 emails a week on Creo View not working correctly, and most of the time they are having issues with viewing PDFs. Reinstall is the usual answer, but that's not right, and even more difficult with restrictions on Elevated Privileges. If a PDF viewer were embedded with the software I think it might work better than an adapter. That way it doesn't have to depend on another program being installed the right way. No matter what, the software just HAS to work better and be more seemless to the end user. The only other al
I have not seen any keyboard shortcuts in regards to PDF viewing in Creo View. The one I am specifically missing is Zoom All. This is shft+cont+A when viewing a 3d model representation.
When opening large possitioning assemblies from Windchill in Creo View it would be great to have an option to load the first level branch links. This could be an option to select a number of levels to load or just the first level. Upon opening upper level part numbers, we typically are looking for different attributes (description, classification, etc.)which do not load automatically because the branch links are not loaded. We do not desire to load the full maching load with the current option because that takes entirely too long.
Hi at all, please support this product "idea" . Status quo: Creo View can calulate the weight of an anssembly only by picking all Volumes manually. It is not possible to just pick the Topassembly for weight-calculation! This is how it should (must!) work: 1) pick the Topassembly, get the weight and center of mass of everything below. 2) unpic items ans see how the weight and center of mass changes. Best Regards Viktor
It should be possible to add custom notes and annotations in Creo View, the same way as you can do in Creo Illustrate. In Creo View you can use Note templates which is good, but this requires unneccessary steps compared how it is solved in Creo Illustrate. In Creo View you require 6 steps to add a note based on a template In Creo Illustrate you require 2 steps. Suggestion: Introduce same solution in Creo View as in Creo Illustrate
Currently in Creo View version 4.1 raster files (*.rst) cannot be opened. We get the following error message. "Error: This file is not supported. Refer to the PTC Creo View Clients & Toolkits Software Matrices, on the Reference Documents page of PTC.com, for the supported versions or files." However, if the raster file is renamed to *.tif, it can be opened. Therefore it should be possible to open raster files in Creo View.
When this can be done, Creo view would be a more complete creo viewer
when working with Creo View, in "touch screen" support mode, as embedded in web browser - the touch capabilities doesn't work. need to add the support of touch in web browser. also launching the search doesn't open the touchable keyboard. Rami
In our company we have multiple folders for our CAD files, for example all of our standard components are stored in a common folder. Currently in order to open native Creo Parametric files using Creo View you need all of the files in the working directory. I would like PTC to support search paths in Creo View just as they do with Creo Parametric.
Somehow PTC managed to make it more difficult to drag a section plan in Creo View. 1. pull on the section plane outline to drag, and/or 2. Ctrl or Shift or Alt or any combination there of with a mouse button to drag section plane when zoomed in.
The variable SHICODE is actually hardcoded in the psf file Example: SHIPCODE=M040 CREO_COMMON_FILES=Common Files\M040 We have standard psf that we copy at each Windows user login. Some users could have differents release of Creo 2.0. so their psf should be different too. The shipcode should de automaticallay recovered depending on the last realease installed
This could be useful to rotate with model in Creo View with arrow buttons on the keyboard.
I have non creopro users who are using Apple MacBooks. We can not understand why there is an option for ipad/iphone for CreoView, but there is no version supported on IOS.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.