Recently active
CS19262 says that drawings will now open with a model that is present on all sheets as the active model.We need the model that is active at save to be active when the drawing is reopened.This is because when detailing subassemblies, we also add a simplified rep of the top level (65 000 parts) to show additional detail. However the sub-assembly as such does not appear on each sheet. Thus when we publish the drawing in Windchill, the top level assembly is being regenerated every time a sub-assembly drawing is published taking about 3 hours.We have to regenerate the drawing models as the mass properties are not correct on opening due to the presence of assembly cuts.
Currently, when a user is creating a pipeline, the dialog box to specify which linestock only lists linestocks already added and an option to create a new one. If the desired linestock has not been added, the user has to exit the operation, add the linestock, and then restart the pipeline feature.Please add the option to retreive a linestock from the file system while creating a pipeline.
Why do i have to continue to tell creo, that i dont want to be bothered by the yellow popup menus.i want to either be able to save theese settings, or disable the popups all together.Its not that i dont like clicking franticly every time i start Creo, its more, that my mapkeys wont work the first time i use them
Model Manager implements checkbox attribute editor for some properties, but it remains unusuable for searching. Assume that an Model Manager element attribute (ex: masterdata PART_ASSEMBLY) is controlled by a data dictionary (ex: PART_ASSEMBLY_DD) of enumeration type with 2 values (ex: true, false), that requires a value and set a default one (ex: false). Let configure custom.xml with that attribute and the editor com.osm.editor.WMAttEditorCheckBox as the following: ... <Attribute> MY_ATTRIBUTE <AttributeEditorClass>com.osm.editor.WMAttEditorCheckBox</AttributeEditorClass> ... The DBProperties attribute panel looks fine. Now let go to search and you can search element for true or false, but you are no more able search for both (true OR false). We should expect a way to search for true, for false and for true OR false.
Request: Allow spaces and periods in the Name field when creating a part, assembly or annotationBackground:When creating a part, HP R&D uses * the "Name" field for a description of the part.* the "Model Name" field for the HP part numberHP R&D users would like to be able to enter "Screw M2.5 X 6mm long" into the Name field to improve the readability of the part field and allow us to cut and paste 40 character descriptions from SAP into this field without modication. Currently, we modify this field to Screw_M2p5_X_6mm_longNot very legible is it? Now imagine you have an assembly tree with 1600 unique parts, this is where it becomes taxing to read through.Currently spaces are not allowed in the Name field and period while allowed are confused with instances (i.e. screw.1, screw.2, screw.3)Aspirational Request: If a part named screw is used in an assembly 3 times, instead of seeing screw, screw.1 and screw.2 in the Structure Browser, just show screw 3 times. I understand this may b
About the function of reference lines in technical drawings, we would like you to change the presentation of reference lines from leader lines so that we could write reference lines in vertical.
It is not possible to add several conditions in Creo View for showing attributes.I would like to have possible to choose several attributs. Could be added somthing like this: *COMMON*;*MATERIAL*;….? This worked in ProductView 9!Best Regards, Magnus Persson
Problem:Importing ProE/Creo files with the precision of the part is from ProE/Creo is often low. For further work this often is a problem (for example importing a sheet metal and generating a flat projection).Workaround is Export in Stp and Import with higher precision.Ideally woul be the possibility to adjust optional precision during Import od ProE/Creo files.Thomas SchadFa. Scirotec
I would like the STL triangles on flat, circular surfaces generated, generated axially.Step size does help, but the triangles are still not evenly shaped.The first image is how they are generated currently.Below is how I would like to have them generated.
Components (defined with default relative accuracy) with “small” interferences can pass through the Global Interference Analysis.Inaccurate result: "There are no interfering parts"It would be useful to add a tolerance (or accuracy) value in the Global Interference Analysis box.
Is it possible during batch animation to "hide" or "making not visible" some component? ProAnimobjectCreate ProAnimframeObjAdd permits to move some components during animation. The components not included in the frames remains steady but still visible. The goal is to "hide" some components during the animation.
The measurement tool should be able to also measure max distance of curved surfaces. If I need to know the distance between a flat surface/plane and cylinder edge, currently you can you pick "through axis" and "not through axis" which is essentially the minumum distance. If you need the max distance you have to find some other way to pick the edge.
It would be nice to have some settings to define a view without any view label. Even with "No Label" option, the view label does appear like a text placeholder. It could be confused with some other texts placements.
We are using the BOM export functionality from Creo View. It would be a great benefit if we could add the bounding box extents of each object to the export BOM list. Unfortunately this is not possible with Creo View 3.0 M010 as reported in C12292026.
Currently Creo View Adapters cannot publish inventor flexible assembly correctly Steps to reproduce: 1. In an Inventor assembly, make a sub-assembly “Flexible” 2. Re-constraint a part of the flexible sub-assembly and save 3. Publish the assembly with inventorbatch.bat or inventorpublish.bat Expected behavior: Representation should same as the assembly in Inventor Observed behavior: 1. representation in Creo View is not same with the assembly in Inventor 2. It seems that the “Flexible” is ignored by Creo View Adapter
Provide the ability to compare different versions of assemblies. But when comparing different assembly version components and sub-components geometry should be comparable. In the current Creo View 2.0 version user can compare Part Geometries but it comes to assemblies only features created at assembly level can be compared and all component/sub-assemblies are ignored.
Hello All, Measurements: configurable setting for measurements, the black part should be detachable, because customer don´t like it! They need to have the traditional measurements from technical drawings. Best wishes Gabi
Hello All, Coloured cuts: Customers are always asking for hatchings, as in the traditional drawing. best regards Gabi
For downstream folks in our company, they still like to do things the long hand way, starting Creo and running the Tolerance Analysis extension has some interest but it's a too-integrated solution for some who are used to doing this on spreadsheets. Just saw a demo by Geometric on this topic, they basically have a simple visualization app whereby you section the model and then put dims onto that section and then build a tolerance loop equation from which you can chuck out a report and so on. It's not CeTol but then it's wicked easier than manual transposition of the numbers into Excel. Made me wonder why our maintenance dollars couldn't be put forward to putting such basic simple functionality into the Creo view environment as an add on app (for no additional $ please!). I almost wonder whether this is something we could develop ourselves using the API if the API was FOC.... You could probably "yes and..." this, to see tools added into Creo View land which ad
It would be wonderful if there was any update representation (and structure) inside of Creo View. When working with large assemblies Creo View and you have certain objects hidden it would be great to have an option to update certain objects which you know have a new representation in Windchill. This would save a vast amount of time getting just a single component updated.
Our Pdmlink System is only available over http for internal users -- in order to use it from outside one has to use citrix.The problem is that there is no documentation how to install and configure creo view in a citrix environment.
The Creo/Parametric Simplify Representation should be supported by the Adapter for Creo/Parametric in order to manage different representations in Creo/View.
A batch tool as in IsoDraw owuld be greate to have in Creo Illustrate as well.
Creo Illustrate - Sequence: it is an operational need for workinstructions that the itemlist can be accessed in Creo View after publishing from Creo Illustrate. It's to give the operators an overview of all components shown in the viewed step.
It would be good to expand vectorized output possibilities from Creo Illustrate. When comparing against Arbortext ISODraw, output possibilities are very poor. For vectorized output, only .cgm or .svg is possible. It would be good to have the .pdf option as well, for example. If a vectorized pdf is needed, users have to export to .svg and generate a vectorized pdf with the help of Adobe. Why not generate it directly from Creo Illustrate?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.